Filter by
System of Measurement
Bearing Type
Ball Bearing Profile
Bearing Construction
ID
For Load Direction
Lubricant
Inner Ring Type
Cage Material
Shaft Type
Dynamic Radial Load Capacity
Maximum Rotation Speed
Lubrication
Minimum Temperature
Radial Clearance
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Ball Bearings
 |
Open |
 |
Shielded |
 |
Sealed |
Smoother than smooth—the balls inside these bearings roll nearly friction-free. You’ll often find them on rapidly rotating parts, from the whirring chuck on a power drill to the spinning shaft on an electric motor.
Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.
Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.
Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.
Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.
Temp. Range, ° F | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | For Housing ID, mm | Wd., mm | ABEC Rating | Dynamic Radial Load Cap., lb. | Max. Rotation Speed, rpm | Min. | Max. | Inner Ring Type | Bearing Trade No. | Each | |||
Open | |||||||||||||
Steel | |||||||||||||
| 17 | 26 | 5 | 1 | 500 | 26,000 | -20 | 230 | Standard | 6803 | 5972K214 | 00000 | ||
| 17 | 30 | 7 | 1 | 1,000 | 23,000 | -20 | 230 | Standard | 6903 | 5972K244 | 00000 | ||
Shielded | |||||||||||||
Steel | |||||||||||||
| 17 | 26 | 5 | 1 | 500 | 26,000 | -20 | 230 | Standard | 6803-2Z | 5972K156 | 00000 | ||
| 17 | 30 | 7 | 1 | 1,000 | 23,000 | -20 | 230 | Standard | 6903-2Z | 5972K167 | 00000 | ||
Sealed | |||||||||||||
Steel | |||||||||||||
| 17 | 26 | 5 | 1 | 500 | 26,000 | -20 | 230 | Standard | 6803-2RS | 5972K278 | 0000 | ||
| 17 | 30 | 7 | 1 | 1,000 | 23,000 | -20 | 230 | Standard | 6903-2RS | 5972K289 | 0000 | ||
