About Ball and Roller Bearings
More
Easy-Install Mounted Cylindrical-Roller Bearings
A split housing means you can remove the top half of these bearings to inspect or repair shafts and components. This reduces downtime and minimizes the risk of damaging surrounding components.
Bearings for radial loads accommodate minor changes in your shaft’s length as it expands and contracts from your machinery heating up and cooling down. They are typically used in assemblies with long shafts and positioned away from the drive end.
Bearings for combined radial and thrust loads anchor the shaft in position and absorb the thrust load. However, they are not designed to handle your shaft expanding and contracting. They’re typically mounted near the drive side of an assembly.
For technical drawings and 3-D models, click on a part number.
Mounted Bearings | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Replacement Bearings | ||||||||||||||
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | Each | ||
Sealed Steel Bearings with Iron Housing—Shaft Mount Type: Clamp On | ||||||||||||||||||
For Radial Load Direction | ||||||||||||||||||
2 15/16" | 3 3/4" | 7 7/8" | 13" | 3" | 3/4" | 11" | 29,840 | 40,070 | __ | __ | 3,750 | 35° to 210° | Self Aligning | Required | 0000000 | 000000000 | 0000000 | 000000000 |
For Combined Radial and Thrust Load Direction | ||||||||||||||||||
2 15/16" | 3 3/4" | 7 7/8" | 13" | 3" | 3/4" | 11" | 29,840 | 40,070 | 430 | 430 | 3,750 | 35° to 210° | Self Aligning | Required | 0000000 | 00000000 | 0000000 | 00000000 |
Quick-Disconnect (QD) Bushings
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||
---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
Clamp On | ||||||||
SF Style Bushing | ||||||||
2 15/16" | 2 1/16" | 3/4" | 1/32" | 360 | Cast Iron | Clamping Screws, Machine Key | 00000000 | 000000 |
Taper-Lock Bushings
Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing style. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Taper | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
3020 Style Bushing | |||||||||
2 15/16" | 2" | 3/4" | 3/8" | 8° | 800 | Steel | Machine Key, Set Screws | 000000000 | 000000 |