Dry-Running Mounted Sleeve Bearings
Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Bronze bearings have embedded particles of slippery PTFE to reduce friction during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
| 25mm | 32mm | 65mm | 127mm | 22.8mm | 22.8mm | 14.5mm | 101.5mm | 8,100 lbs. @ 60 rpm | -40° to 280° | Self Aligning | 0000000 | 000000 |
Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
| 25mm | 66.5mm | 127mm | 23mm | 23mm | 9.5mm | 14.5mm | 101.5mm | 8,300 lbs. @ 60 rpm | -40° to 380° | Self Aligning | 0000000 | 000000 |