About Ball and Roller Bearings
More
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R1-5 | 3/32" | 5/16" | 7/64" | 440C Stainless Steel | 120 | 40 | 71,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
| R133 | 3/32" | 3/16" | 1/16" | 440C Stainless Steel | 40 | 10 | 95,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 0000 |
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R1-5-2Z | 3/32" | 5/16" | 9/64" | 440C Stainless Steel | 120 | 40 | 71,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
| R133-2Z | 3/32" | 3/16" | 3/32" | 440C Stainless Steel | 30 | 10 | 95,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 0000 |
Inner Ring | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R1-5-2Z | 3/32" | 5/16" | 9/64" | 0.138" | 0.172" | 440C Stainless Steel | 120 | 40 | 71,000 | Lubricated | -40° to 240° | ABEC-5 | 000000000 | 00000 |
| R133-2Z | 3/32" | 3/16" | 3/32" | 0.118" | 0.125" | 440C Stainless Steel | 30 | 10 | 95,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 00000 |
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| R1-5 | 3/32" | 5/16" | 7/64" | 440C Stainless Steel | 75 | 15 | 74,000 | Lubricated | -10° to 240° | ABEC-7 | 000000 | 000000 |
| R133 | 3/32" | 3/16" | 1/16" | 440C Stainless Steel | 20 | 4 | 100,000 | Lubricated | -10° to 240° | ABEC-7 | 000000 | 00000 |
Shielded | ||||||||||||
| R1-5-2Z | 3/32" | 5/16" | 9/64" | 440C Stainless Steel | 60 | 20 | 34,000 | Lubricated | -10° to 240° | ABEC-7 | 0000000 | 00000 |
| R133-2Z | 3/32" | 3/16" | 3/32" | 440C Stainless Steel | 15 | 5 | 34,000 | Lubricated | -10° to 240° | ABEC-7 | 0000000 | 00000 |
Flanged Ball Bearings
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R1-5 | 3/32" | 5/16" | 7/64" | 0.359" | 0.02" | 440C Stainless Steel | 120 | 40 | 71,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
| R133 | 3/32" | 3/16" | 1/16" | 0.234" | 0.02" | 440C Stainless Steel | 40 | 10 | 95,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 0000 |
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R1-5-2Z | 3/32" | 5/16" | 9/64" | 0.359" | 0.03" | 440C Stainless Steel | 120 | 40 | 71,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
| R133-2Z | 3/32" | 3/16" | 3/32" | 0.234" | 0.03" | 440C Stainless Steel | 30 | 10 | 95,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 0000 |
Extended
Inner Ring
with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| R1-5-2Z | 3/32" | 5/16" | 9/64" | 0.359" | 0.03" | 0.138" | 0.172" | 440C Stainless Steel | 120 | 40 | 71,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 000000 |
| R133-2Z | 3/32" | 3/16" | 3/32" | 0.234" | 0.03" | 0.118" | 0.125" | 440C Stainless Steel | 30 | 10 | 95,000 | Lubricated | -20° to 250° | ABEC-5 | 000000000 | 00000 |
Precision Flanged Ball Bearings
When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings. All are 440C stainless steel for good corrosion resistance. The flange ensures proper positioning inside a tube or housing.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||||
| R1-5 | 3/32" | 5/16" | 7/64" | 0.359" | 0.02" | 440C Stainless Steel | 75 | 15 | 74,000 | Lubricated | -10° to 240° | ABEC-7 | 000000 | 000000 |
| R133 | 3/32" | 3/16" | 1/16" | 0.234" | 0.02" | 440C Stainless Steel | 20 | 4 | 100,000 | Lubricated | -10° to 240° | ABEC-7 | 000000 | 00000 |
Shielded | ||||||||||||||
| R1-5-2Z | 3/32" | 5/16" | 9/64" | 0.359" | 0.03" | 440C Stainless Steel | 60 | 20 | 34,000 | Lubricated | -60° to 250° | ABEC-7 | 0000000 | 00000 |
| R133-2Z | 3/32" | 3/16" | 3/32" | 0.234" | 0.03" | 440C Stainless Steel | 15 | 5 | 34,000 | Lubricated | -60° to 250° | ABEC-7 | 0000000 | 00000 |
Low-Profile Mounted Ball Bearings
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Overall | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Shielded 440C Stainless Steel Bearings with Aluminum Housing | |||||||||||||
Shaft Mount Type: Press Fit | |||||||||||||
| 3/32" | 3/8" | 3/4" | 1 29/64" | 13/64" | 1 1/8" | 95 | 32 | 60,000 | -30° to 300° | Fixed Alignment | Lubricated | 00000000 | 000000 |
Tight-Fit Ring Shims
For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other ring shims.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like brass, can be used as wear plates between components that rub together, preventing damage to equipment.
Stainless steel shims are more corrosion resistant than alloy steel shims. 316 stainless steel shims have the best corrosion resistance of our stainless steel shims.
Brass shims are corrosion resistant and nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.005" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 316 Stainless Steel | Rockwell B90 | May Be Mildly Magnetic | 10 | 000000000 | 000000 |
0.006" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 316 Stainless Steel | Rockwell B90 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
0.008" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 316 Stainless Steel | Rockwell B90 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
0.01" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 316 Stainless Steel | Rockwell B90 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
0.012" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 316 Stainless Steel | Rockwell B90 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
0.014" Thick. (-0.001" to 0.003" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 316 Stainless Steel | Rockwell B90 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
0.016" Thick. (-0.002" to 0.002" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 316 Stainless Steel | Rockwell B90 | May Be Mildly Magnetic | 10 | 000000000 | 00000 |
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.001" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 000000 |
0.002" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.003" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.004" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.005" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.006" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.008" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.01" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.012" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.014" Thick. (-0.001" to 0.003" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
0.016" Thick. (-0.002" to 0.002" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 18-8 Stainless Steel | Rockwell B70 | May Be Mildly Magnetic | 25 | 000000000 | 00000 |
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.001" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 00000 |
0.002" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.003" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.004" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.005" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.006" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.008" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.01" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.012" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.014" Thick. (-0.001" to 0.003" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |
0.016" Thick. (-0.002" to 0.002" Tolerance) | |||||||||
| 3/32" | 0" to 0.005" | 13/64" | -0.005" to 0.005" | 260 Brass | Rockwell B70 | Nonmagnetic | 10 | 000000000 | 0000 |