Filter by
System of Measurement
Mounted Bearing Type
ID
Bearing Type
Shaft Type
Mounting Hole Center-to-Center
Flange Thickness
Shaft Mount Type
Bearing Seal Type
Housing Material
For Load Direction
Bearing Material
Number of Set Screws Included
Mounting Hole Diameter
Alignment Style
Set Screw Thread Size
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Maximum Rotation Speed
REACH
RoHS
Grease Fitting Thread Size
About Ball and Roller Bearings
More
Mounted Ball Bearings with Four-Bolt Flange
Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Eccentric lock bearings are quick to install—twist them in one direction to tighten and the opposite to loosen. They’re better than set screw bearings for high speed applications, but they only work with shafts that rotate in one direction.
For technical drawings and 3-D models, click on a part number.
Bearings
Eccentric Lock Mount
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | ||||||||||||||
Shaft Mount Type: Eccentric Lock | ||||||||||||||
| 30mm | 108mm | 108mm | 46.7mm | 13mm | 11.5mm | 82.5mm | 4,350 | 2,500 | 6,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 0000000 |