35.01mm ID Bearings | McMaster-Carr

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	35	41	25	2,700 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K277	000000


	35	41	35	3,750 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K278	00000
	35	44	28	3,000 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K281	00000
	35	44	35	3,750 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K282	00000
	35	45	25	2,700 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K765	00000
	35	45	30	3,250 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K283	00000
	35	45	35	3,750 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K72	00000
	35	45	40	4,300 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K284	00000
	35	45	50	5,400 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6658K766	00000


	High-Load 863 Iron Copper



			35	45	35	6,100 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2868T404	00000


			35	45	50	8,750 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2868T405	00000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	35	40	25	45	2.5	2,700 lb. @ 30 rpm	1,900 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K289	000000


	High-Load 863 Iron Copper



			35	40	32	45	2.5	5,600 lb. @ 30 rpm	2,400 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N189	00000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	35	45	35	3,750 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K214	000000


	High-Load 863 Iron Copper



			35	45	35	6,100 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N224	00000


			35	45	50	8,750 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N225	00000

Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	35	40	25	45	2.5	2,700 lb. @ 30 rpm	1,900 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6659K717	000000


	35	40	32	45	2.5	3,450 lb. @ 30 rpm	1,900 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6659K718	00000


	High-Load 863 Iron Copper



			35	40	25	45	2.5	4,350 lb. @ 30 rpm	2,400 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2938T819	00000


			35	40	32	45	2.5	5,600 lb. @ 30 rpm	2,400 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2938T82	00000

Oil-Embedded Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	35	45	50	5,400 lb. @ 30 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K225	000000