6.02mm ID Bearings | McMaster-Carr

Leave the lubricant in the supply closet—these low-maintenance sleeve bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings withstand grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. They mount securely in thin panels.

Acetal—The most common choice for plastic bearings, acetal is wear-resistant and affordable.

Ultra-Low-Friction PTFE-Filled Acetal—Made from a special blend of acetal and PTFE, these extra-slippery bearings are ideal for conveyors and other machinery with frequent starts and stops.

Steel Housing—Best for dry environments as moisture will cause them to rust.

Press-Fit Panel Mount—Press these bearings into plastic panels or thin sheet metal to mount them by hand. They're a good fit for tight spaces, or if you'd like a removable mounting option. The sturdy flange prevents bearings from pulling through, giving you added stability.

Clinch Panel Mount—Secure these self-clinching bearings into sheet metal panels for a permanent hold. Install them using an air-powered or hydraulic press—no need for precision-bored holes or machined mounts. They're not for use in plastic panels.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
Acetal Bearing with Steel Housing







	Press-Fit Panel Mount

	6	12.73	9.6	14.2	0.8	36 lb. @ 120 rpm	5°	0000000	000000




			Clinch Panel Mount

			6	12.7	10.2	14	1.3	38 lb. @ 120 rpm	5°	0000000	0000


			Ultra-Low-Friction PTFE-Filled Acetal Bearing with Steel Housing







							Press-Fit Panel Mount

							6	12.73	9.6	14.3	0.8	80 lb. @ 120 rpm	5°	0000000	00000

Washers for Needle-Roller Thrust Bearings

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

For Shaft Dia., mm	OD, mm	Thk., mm	Washer Material	Specs. Met		Each
6	19	1	Steel	DIN 5405-3, ISO 303	00000000	00000
6	19	2.75	Steel	—	00000000	00000

Needle-Roller Thrust Bearings


Bearings	Washers

Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.

A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Thrust Bearings										Thin Washers			Thick Washers
	For Shaft Dia., mm	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Specs. Met		Each	Thk., mm		Each	Thk., mm		Each
Steel



		6	19	2	Nylon	1,500	19,000	0 to 240	DIN 5405-2	0000000	00000	1	00000000	00000	2.75	00000000	000000

Dry-Running Flanged Sleeve Bearings for Food and Beverage

Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

Moisture-Resistant Plastic Blend—Similar to UHMW, these bearings will keep their shape after washdowns but won’t hold up to steam cleaning. They're bright blue so they are easy to spot if they fall into your production line.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F	Specs. Met		Each
Moisture-Resistant Plastic Blend



	6	8	4	12	1	5 lb. @ 120 rpm	19 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297	000000000	00000


	6	8	6	12	1	8 lb. @ 120 rpm	19 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297	000000000	0000
	6	8	8	12	1	10 lb. @ 120 rpm	19 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297	000000000	0000

Dry-Running Mounted Sleeve Bearings

Leave the lubricant in the supply closet—these low-maintenance bearings are made from naturally slippery plastic. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.

Acetal—The most common choice for plastic bearings, acetal is wear-resistant and affordable.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall, mm
	For Shaft Dia., mm	Ctr. Ht., mm	Lg.	Wd.	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
Acetal Bearing with Aluminum Housing



		6	9.5	36.6	9.7	36 lb. @ 120 rpm	5°	0000000	000000


		6	14.5	57.2	9.8	36 lb. @ 120 rpm	5°	0000000	00000

Dry-Running Sleeve Bearings for Food and Beverage

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Color	Temp. Range, ° F	Specs. Met		Each
Moisture-Resistant Plastic Blend



	6	8	6	65 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1550	00000000	00000


	6	8	10	105 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1550	00000000	0000

Light Duty Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange

With simple, lightweight designs, these bearings are a cost-effective option when extreme precision isn't necessary. Less stable than bearings with forged, one-piece housings, they're good for hand-cranked systems, gravity feed conveyor rollers, and other low-speed applications. Inside, the sleeve is made of naturally slick plastic that doesn't require lubrication. They'll keep shafts spinning with no messy grease to drip off, wash out, or collect dust. With no moving parts, sleeve bearings stand up to grimy environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The housing mounts in place with a two-bolt flange, the most common type of flanged bearing.

Ultra-Low-Friction PTFE-Filled Acetal—Made from a special blend of acetal and PTFE, these extra-slippery bearings are ideal for conveyors and other machinery with frequent starts and stops.

Steel Housing—Best for dry environments as moisture will cause them to rust.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall, mm
	For Shaft Dia., mm	Lg.	Wd.	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
Ultra-Low-Friction PTFE-Filled Acetal Bearing with Steel Housing



		6	45.5	6.9	1.2	47 lb. @ 120 rpm	5°	0000000	000000

Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange

Reduce upkeep with sleeve bearings that lubricate themselves. Made from porous, oil-saturated bronze, they release a thin film of lubrication upon startup to keep shafts spinning. With no moving parts, sleeve bearings withstand dusty, dirty environments better than ball or roller bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing supports the shaft and secures with a two-bolt flange, the most common type of flanged bearing.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall, mm
	For Shaft Dia., mm	Lg.	Wd.	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
840 Bearing Bronze Bearing with Aluminum Housing



		6	41.5	10	5	185 lb. @ 120 rpm	5°	0000000	00000

Oil-Embedded Panel-Mount Sleeve Bearings

Steel Housing—Best for dry environments as moisture will cause them to rust.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
840 Bearing Bronze Bearing with Steel Housing







	Clinch Panel Mount

	6	12.7	10.2	14	1	185 lb. @ 120 rpm	5°	0000000	00000

Oil-Embedded Mounted Sleeve Bearings

Reduce upkeep with sleeve bearings that lubricate themselves. Made from porous, oil-saturated bronze, they release a thin film of lubrication upon startup to keep shafts spinning. With no moving parts, they withstand dusty, dirty environments better than ball bearings. However, with more friction generated, they're less effective at high speeds. The sturdy housing bolts down to support shafts as they turn.

Aluminum Housing—One-third the weight of cast iron but not as strong. Aluminum also resists corrosion.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall, mm
	For Shaft Dia., mm	Ctr. Ht., mm	Lg.	Wd.	Dynamic Radial Load Cap. @ Speed	Misalignment Capability		Each
840 Bearing Bronze Bearing with Aluminum Housing



		6	9.5	36.5	9.5	175 lb. @ 120 rpm	5°	0000000	000000