System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
ID ID | Show |
---|
|
ID ID | Hide |
---|
Bearing Trade Number Bearing Trade Number |
---|

Ring Material Ring Material |
---|
|
Maximum Speed Maximum Speed |
---|
For Load Direction For Load Direction |
---|
![]() | Radial |
![]() | Combined Radial and Thrust |
![]() | Thrust |
Cage Material Cage Material |
---|
|
Inner Ring Type Inner Ring Type |
---|
![]() | Standard |
Lubrication Lubrication |
---|
|
Lubricant Lubricant |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
Ball Material Ball Material |
---|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Plain Bearings
More
About Ball and Roller Bearings
More
About Plastic
More
Ball Bearings
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
607-2Z | 7mm | 19mm | 6mm | Steel | 580 | 230 | 45,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
607-2RS | 7mm | 19mm | 6mm | Steel | 580 | 230 | 22,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |
627-2RS | 7mm | 22mm | 7mm | Steel | 730 | 300 | 20,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000 |
Permanently Lubricated Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
607-2RS | 7mm | 19mm | 6mm | Steel | 390 | 190 | 23,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
627-2RS | 7mm | 22mm | 7mm | Steel | 570 | 300 | 20,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
627 | 7mm | 22mm | 7mm | 440C Stainless Steel | 590 | 300 | 36,000 | Lubricated | -40° to 240° | ABEC-3 | 00000000 | 000000 |

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
627-2Z | 7mm | 22mm | 7mm | 440C Stainless Steel | 590 | 300 | 30,000 | Lubricated | -40° to 240° | ABEC-3 | 0000000 | 000000 |
687-2Z | 7mm | 14mm | 5mm | 440C Stainless Steel | 260 | 100 | 45,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 0000 |

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
627-2RS | 7mm | 22mm | 7mm | 440C Stainless Steel | 590 | 300 | 30,000 | Lubricated | -40° to 240° | ABEC-3 | 0000000 | 000000 |
Permanently Lubricated Stainless Steel Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
607 | 7 | 19 | 6 | 440C Stainless Steel | 390 | 190 | 23,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
627 | 7 | 22 | 7 | 440C Stainless Steel | 570 | 300 | 20,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
687 | 7 | 14 | 3.5 | 440C Stainless Steel | 200 | 100 | 30,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
697 | 7 | 17 | 5 | 440C Stainless Steel | 300 | 150 | 28,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
607-2RS | 7 | 19 | 6 | 440C Stainless Steel | 390 | 190 | 23,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
687-2RS | 7 | 14 | 5 | 440C Stainless Steel | 200 | 100 | 30,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
697-2RS | 7 | 17 | 5 | 440C Stainless Steel | 300 | 150 | 28,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Stainless Steel Ball Bearings


Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||
7mm | 11mm | 2.5mm | 440C Stainless Steel | 80 | 29 | 44,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 000000 |
7mm | 14mm | 3.5mm | 440C Stainless Steel | 160 | 50 | 38,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 00000 |
Shielded | |||||||||||
7mm | 11mm | 3mm | 440C Stainless Steel | 80 | 29 | 44,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 00000 |
Ultra-Corrosion-Resistant Stainless Steel Ball Bearings

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
607 | 7mm | 19mm | 6mm | 316 Stainless Steel | 75 | 50 | 2,300 | Required | -40° to 140° | Not Rated | 0000000 | 000000 |
637 | 7mm | 26mm | 9mm | 316 Stainless Steel | 120 | 95 | 1,600 | Required | -40° to 140° | Not Rated | 00000000 | 00000 |
Plastic Ball Bearings

These acetal bearings have good all-around corrosion and chemical resistance.
316 stainless steel balls have excellent corrosion resistance.
Glass balls have even more corrosion resistance than stainless steel balls.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
316 Stainless Steel Ball | ||||||||||||
Open | ||||||||||||
607 | 7mm | 19mm | 6mm | Acetal Plastic | 42 | 33 | 1,600 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
627 | 7mm | 22mm | 7mm | Acetal Plastic | 40 | 30 | 1,600 | Not Required | -40° to 180° | Not Rated | 0000000 | 0000 |
Glass Ball | ||||||||||||
Open | ||||||||||||
627 | 7mm | 22mm | 7mm | Acetal Plastic | 42 | 33 | 1,600 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.


Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
117 | 7mm | 11mm | 2.5mm | 12.2mm | 0.6mm | 440C Stainless Steel | 80 | 35 | 59,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 000000 |
117 | 7mm | 11mm | 2.5mm | 12.2mm | 0.6mm | Steel | 100 | 45 | 59,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |


Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
117-2Z | 7mm | 11mm | 3mm | 12.2mm | 0.6mm | 440C Stainless Steel | 100 | 35 | 50,000 | Lubricated | -20° to 250° | ABEC-5 | 00000000 | 000000 |
607-2Z | 7mm | 19mm | 6mm | 22mm | 1.5mm | Steel | 520 | 200 | 38,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
687-2Z | 7mm | 14mm | 5mm | 16mm | 1.1mm | 440C Stainless Steel | 210 | 90 | 44,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Thrust Ball Bearings


Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.
Bearings with steel cage and with bronze cage handle higher loads and speeds than bearings with a plastic cage.
For technical drawings and 3-D models, click on a part number.
Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 7mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
11 | 8 | 170 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
High-Load Dry-Running Sleeve Bearings

Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Metric Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
---|---|---|---|---|---|
For 7mm Shaft Dia. | |||||
9mm | 10mm | 620 lbs. @ 120 rpm | -320° to 530° | 0000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
7 mm Shaft Dia. | ||||||||||
11 | 8 | 15 | 2 | 340 lbs. @ 120 rpm | 400 lbs. @ 120 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 000000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings

Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 7 mm Shaft Dia. | ||||||||||
11mm | 8mm | 15mm | 2mm | 10 lbs. @ 120 rpm | 11 lbs. @ 120 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
Chemical-Resistant Dry-Running Flanged Sleeve Bearings

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings. They are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
PEEK Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 7 mm Shaft Dia. | |||||||||
11mm | 8mm | 15mm | 2mm | 140 lbs. @ 120 rpm | 160 lbs. @ 120 rpm | Beige | -20° to 450° | 00000000 | 000000 |
Light Duty Dry-Running Thrust Bearings

Use where high loads and speeds are not required.
Thermoplastic bearings are fiber reinforced and lubricant infused for good wear resistance and low friction with light and medium loads.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
OD | Thick. | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic Blend Bearings | ||||||
---|---|---|---|---|---|---|
For 7 mm Shaft Dia. | ||||||
12mm | 0.5mm | 12 lbs. @ 120 rpm | Gray | -40° to 260° | 0000000 | 00000 |
Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
7mm | 11mm | 9mm | Steel | 700 | 660 | 31,000 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
Shaft Liners for Precision Needle-Roller Bearings

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts. The liner fits between the roller and the shaft.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | OD | Wd. | Ring Material | Lubrication | Specifications Met | Each | |
7mm | 10mm | 12mm | Steel | Required | DIN 620 | 0000000 | 00000 |
Metric Press-Fit Drill Bushings

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings. These bushings are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.
All bushings have a chamfer on the outside that centers the bushing as you place it into the hole. Press into place with a manual or hydraulic press. They also have internal chamfers, so it's easier to insert bits, pins, and punches into the bushing. Some bushings have internal chamfers on both ends, so no matter which end of the bushing is inserted into your jig, your bits, pins, and other tooling enter easily. Having an internal chamfer on the bottom of your bushing may cause shavings to get caught and bind as you remove the bit, however.
DIN 179 bushings meet dimensional and material standards that make sure they're compatible with other parts and tools. Although DIN 179 is no longer an active standard, it's still a common reference point for designers.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD, mm | Lg., mm | Internal Chamfer | For Drill Bit Size | ID, mm | OD, mm | Lg., mm | Drill Bushing Type | Material | Hardness | Specifications Met | 1-5 | 6-11 | 12-Up | |
7 mm ID | ||||||||||||||
12 | 10 | Both Ends | 7 mm | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | PM | Steel | Rockwell C61 | __ | 000000000 | 000000 | 00000 | 00000 |
12 | 10 | One End | 7 mm | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | PM | Steel | Rockwell C61 | DIN 179 | 000000000 | 0000 | 0000 | 0000 |
12 | 16 | Both Ends | 7 mm | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | PM | Steel | Rockwell C61 | __ | 000000000 | 00000 | 0000 | 0000 |
12 | 16 | One End | 7 mm | 0.013 to 0.028 | 0.012 to 0.023 | -0.4 to 0.4 | PM | Steel | Rockwell C61 | __ | 0000000 | 00000 | 0000 | 0000 |
12 | 20 | Both Ends | 7 mm | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | PM | Steel | Rockwell C61 | __ | 000000000 | 00000 | 00000 | 00000 |
12 | 20 | One End | 7 mm | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | PM | Steel | Rockwell C61 | DIN 179 | 000000000 | 00000 | 00000 | 00000 |
Metric Press-Fit Drill Bushings with Head




Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit. Drill bushings ensure accurate, consistent cuts and drilled holes from one part to the next. They sometimes also work as spacers, shims, and machinery bushings. Made of hardened, ground steel, these bushings hold their shape and resist wear over time. The flanged head protects your jig plate from damage caused by heavy use.
Although it's no longer an active standard, DIN 172 is still a common reference point for making sure parts are compatible with other parts and tools.
These bushings work in both countersunk and standard drill holes. To install, place the bushing inside the hole in your jig. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once centered, press the bushing into the hole with a hydraulic or lever press.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD, mm | Lg., mm | OD, mm | Thick., mm | ID, mm | OD, mm | Lg., mm | Drill Bushing Type | Material | Hardness | Specifications Met | 1-5 | 6-11 | 12-Up | |
7 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 000000 | 000000 | 00000 |
12 | 13 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
12 | 17 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
Clear Impact-Resistant Polycarbonate Tubes
- Color: Clear
- Temperature Range: -40° to 200° F
- Tensile Strength: 8,900-9,500 psi (Good)
- Impact Strength: 12-18 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R118 (Hard)
- For Use Outdoors: No
Comparable to Lexan, Hyzod, Tuffak, and Makrolon, these polycarbonate tubes are half the weight of glass and maintain excellent impact resistance across a wide temperature range. Use them to make instrument gauge covers and display racks.
For technical drawings and 3-D models, click on a part number.

8 ft. Lg. | ||||||
---|---|---|---|---|---|---|
OD, mm | OD Tolerance, mm | ID, mm | ID Tolerance, mm | Specifications Met | Each | |
1 mm Wall Thick. (-0.13 mm to 0.13 mm) | ||||||
9 | -0.130 to 0.130 | 7 | -0.130 to 0.130 | FDA Compliant 21 CFR 177.1580, UL 94 HB | 00000000 | 00000 |
2 mm Wall Thick. (-0.26 mm to 0.26 mm) | ||||||
11 | -0.130 to 0.130 | 7 | -0.130 to 0.130 | FDA Compliant 21 CFR 177.1580, UL 94 HB | 00000000 | 0000 |