8.01mm ID Bearings | McMaster-Carr

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	8	10	6	145 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K129	00000


	8	10	10	245 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K131	0000
	8	10	15	370 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K132	00000
	8	11	6	145 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K133	0000
	8	11	8	195 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K732	0000
	8	11	12	290 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K733	0000
	8	11	16	390 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K134	0000
	8	12	6	145 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K734	0000
	8	12	8	195 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K68	0000
	8	12	10	245 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K135	0000
	8	12	12	290 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K735	0000


	8	12	16	390 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K736	0000
	8	12	20	490 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K136	0000
	8	14	8	195 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K737	0000
	8	14	12	290 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K137	0000
	8	14	16	390 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K138	0000
	8	14	20	490 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6658K139	0000


	High-Load 863 Iron Copper



			8	11	8	350 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T319	0000


			8	11	12	520 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T321	0000
			8	12	6	260 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T322	0000
			8	12	8	350 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T323	0000
			8	12	12	520 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T324	0000
			8	12	16	700 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T325	0000
			8	14	8	350 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2868T326	0000

Oil-Embedded Flanged Sleeve Bearings

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	8	11	10	14	1.5	245 lb. @ 120 rpm	320 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6659K676	00000


	8	12	6	16	2	145 lb. @ 120 rpm	460 lb. @ 120 rpm	Mineral Oil	10 to 220	6659K115	0000
	8	12	8	16	2	195 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6659K677	0000
	8	12	12	16	2	290 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6659K678	0000
	8	12	16	16	2	390 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	-35 to 300	6659K679	0000


	High-Load 863 Iron Copper



			8	11	10	14	1.5	430 lb. @ 120 rpm	320 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2938T759	0000


			8	12	8	16	2	350 lb. @ 120 rpm	410 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2938T76	0000
			8	12	12	16	2	520 lb. @ 120 rpm	410 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2938T761	0000
			8	12	16	16	2	700 lb. @ 120 rpm	410 lb. @ 120 rpm	Synthetic Oil	-15 to 300	2938T762	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	8	11	8	195 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K129	00000


	8	11	12	290 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K131	0000
	8	12	6	145 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K132	0000
	8	12	8	195 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K133	0000
	8	12	12	290 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K134	0000
	8	12	16	390 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K135	0000
	8	14	8	195 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K136	0000


	High-Load 863 Iron Copper



			8	11	8	350 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N129	0000


			8	11	12	520 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N131	0000
			8	12	6	260 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N132	0000
			8	12	8	350 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N133	0000
			8	12	12	520 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N134	0000
			8	12	16	700 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N135	0000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	8	11	10	14	1.5	245 lb. @ 120 rpm	320 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K224	00000


	8	12	8	16	2	195 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K225	0000
	8	12	12	16	2	290 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K226	0000
	8	12	16	16	2	390 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K227	0000


	High-Load 863 Iron Copper



			8	11	10	14	1.5	430 lb. @ 120 rpm	320 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N123	0000


			8	12	8	16	2	350 lb. @ 120 rpm	410 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N124	0000
			8	12	12	16	2	520 lb. @ 120 rpm	410 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N125	0000
			8	12	16	16	2	700 lb. @ 120 rpm	410 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N126	0000

Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	8	12	8	16	2	195 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K55	00000


	8	12	12	16	2	290 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K56	0000
	8	12	16	16	2	390 lb. @ 120 rpm	460 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K57	0000


	High-Load 863 Iron Copper



			8	12	8	16	2	350 lb. @ 120 rpm	410 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	5373N125	0000

Oil-Embedded Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	8	11	8	195 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K129	00000


	8	11	12	290 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K131	0000
	8	12	6	145 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K132	0000
	8	12	8	195 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K133	0000
	8	12	12	290 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K134	0000
	8	12	16	390 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K135	0000


	High-Load 863 Iron Copper



			8	11	8	350 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N129	0000


			8	12	6	260 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N132	0000
			8	12	8	350 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N133	0000
			8	12	16	700 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N135	0000