Filter by
Bearing Type
DFARS Compliance
About Linear Bearings
More
Linear Ball Bearings
Bearing with Retaining Ring Grooves
Bearing Without Retaining Ring Grooves
Bearings are for use with round end-supported shafts. To install, slide bearings into a housing (not included). For bearings with retaining ring grooves, secure with two retaining rings (sold individually).
Bearings with end seals keep lubricant in and dust out.
Bearings with stainless steel balls are more corrosion resistant than bearings with steel balls.
Self-aligning bearings compensate for shaft misalignment.
Fixed-alignment bearings are for use where shaft misalignment is unlikely.
For technical drawings and 3-D models, click on a part number.
Self Aligning with 0.5° Misalignment Capability
Bearings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Load Capacity, lbs. | External Retaining Rings | |||||||||||
| For Shaft Dia. | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic | Static | Max. Temp., °F | For Shaft Material | Each | Each | ||
Acetal Bearings with Stainless Steel Balls | ||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5010" | 0.511" | No | 42 | 25 | 185° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
| 3/8" | 7/8" | 0.6250" - 0.6255" | 0.699" | No | 70 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8755" | 1.032" | Yes | 185 | Not Rated | 185° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1255" | 1" | Yes | 430 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1258" | 1.112" | Yes | 290 | 260 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2505" | 1.285" | Yes | 790 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2510" | 1.272" | Yes | 430 | 370 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5630" | 1.901" | Yes | 1,300 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5635" | 1.886" | Yes | 810 | 720 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0008" | 2.031" | Yes | 1,600 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0012" | 2.011" | Yes | 1,400 | 1,100 | 176° | Stainless Steel, Steel | 000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3760" | 2.442" | Yes | 2,700 | Not Rated | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3762" | 2.422" | Yes | 2,000 | 1,500 | 176° | Stainless Steel, Steel | 000000 | 000000 | 0000000 | 0000 |
| 2" | 4" | 3.0000" - 3.0012" | 3.206" | Yes | 3,500 | 2,700 | 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
Acetal Bearings with Steel Balls | ||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5007" | 0.515" | Yes | 35 | 25 | 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 3/8" | 7/8" | 0.6250" - 0.6257" | 0.703" | Yes | 55 | 40 | 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8758" | 1.032" | Yes | 260 | 200 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1258" | 1.112" | Yes | 290 | 260 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2510" | 1.272" | Yes | 430 | 370 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5635" | 1.886" | Yes | 810 | 720 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0012" | 2.011" | Yes | 1,400 | 1,100 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3762" | 2.422" | Yes | 2,000 | 1,500 | 176° | Stainless Steel, Steel | 000000 | 00000 | 0000000 | 0000 |
Fixed Alignment
Bearings | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Load Capacity, lbs. | External Retaining Rings | ||||||||||||
| For Shaft Dia. | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | With End Seals | Dynamic | Static | Min. Temp., °F | Max. Temp., °F | For Shaft Material | Each | Each | ||
440C Stainless Steel Bearings with Stainless Steel Balls | |||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5005" | 0.51" | Yes | 45 | 60 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
| 3/8" | 7/8" | 0.6250" - 0.6255" | 0.64" | Yes | 50 | 70 | -4° | 248° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8755" | 0.96" | Yes | 110 | 175 | -4° | 248° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1255" | 1.1" | Yes | 170 | 265 | -4° | 248° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2505" | 1.17" | Yes | 190 | 305 | -4° | 248° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5630" | 1 3/4" | Yes | 220 | 350 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0010" | 2" | Yes | 350 | 615 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3760" | 2.41" | Yes | 490 | 900 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 2" | 4" | 3.0000" - 3.0010" | 3.19" | Yes | 855 | 1,700 | -4° | 248° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
Steel Bearings with Steel Balls | |||||||||||||
| 1/4" | 3/4" | 0.5000" - 0.5007" | 0.51" | Yes | 45 | 60 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/4" | 1 3/8" | 0.5000" - 0.5007" | 1.02" | Yes | 70 | 115 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/8" | 7/8" | 0.6250" - 0.6257" | 0.64" | Yes | 50 | 70 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/8" | 1 19/32" | 0.6250" - 0.6257" | 1.27" | Yes | 75 | 140 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 1 1/4" | 0.8750" - 0.8758" | 0.96" | Yes | 115 | 175 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 2 3/8" | 0.8750" - 0.8758" | 1.93" | Yes | 180 | 350 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 1 1/2" | 1.1250" - 1.1255" | 1.1" | Yes | 170 | 265 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 5/8" | 2 13/16" | 1.1250" - 1.1258" | 2.21" | Yes | 275 | 525 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 3/4" | 1 5/8" | 1.2500" - 1.2510" | 1.17" | Yes | 190 | 305 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 3/4" | 3 3/32" | 1.2500" - 1.2510" | 2.33" | Yes | 305 | 615 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1" | 2 1/4" | 1.5625" - 1.5635" | 1.76" | Yes | 220 | 350 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1" | 4 9/32" | 1.5625" - 1.5635" | 3.51" | Yes | 350 | 705 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 2 5/8" | 2.0000" - 2.0010" | 2.01" | Yes | 350 | 615 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 5" | 2.0000" - 2.0012" | 4.01" | Yes | 560 | 1,200 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 3" | 2.3750" - 2.3762" | 2.41" | Yes | 490 | 900 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 5 11/16" | 2.3750" - 2.3762" | 4.82" | Yes | 770 | 1,800 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 000000 | 0000000 | 0000 |
| 2" | 4" | 3.0000" - 3.0010" | 3.19" | Yes | 855 | 1,700 | Not Rated | 176° | Stainless Steel, Steel | 00000000 | 000000 | 0000000 | 00000 |
Fixed Alignment–Metric
Bearings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Load Capacity, lbs. | External Retaining Rings | |||||||||||
| For Shaft Dia., mm | Overall Lg., mm | For Housing ID, mm | Retaining Ring Groove End-to-End Lg., mm | With End Seals | Dynamic | Static | Temperature Range, °F | For Shaft Material | Each | Each | ||
440C Stainless Steel Bearings with Stainless Steel Balls | ||||||||||||
| 3 | 10 | 7.000 - 7.015 | __ | No | 15 | 20 | -4° to 176° | Stainless Steel, Steel | 00000000 | 000000 | 000000 | 00 |
| 4 | 12 | 8.000 - 8.015 | __ | No | 15 | 25 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 000000 | 00 |
| 5 | 15 | 10.000 - 10.018 | 10.2 | Yes | 35 | 45 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 00000 |
| 6 | 19 | 12.000 - 12.018 | 13.5 | Yes | 45 | 55 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 8 | 25 | 16.000 - 16.018 | 16.5 | Yes | 55 | 90 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 10 | 29 | 19.000 - 19.021 | 22 | Yes | 80 | 120 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 12 | 30 | 21.000 - 21.021 | 23 | Yes | 110 | 175 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 000000000 | 00000 |
| 13 | 32 | 23.000 - 23.021 | 23 | Yes | 110 | 175 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 16 | 36 | 26.000 - 26.021 | 24.9 | Yes | 125 | 200 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 20 | 45 | 32.000 - 32.025 | 31.5 | Yes | 190 | 305 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 25 | 58 | 40.000 - 40.025 | 44.1 | Yes | 220 | 350 | -4° to 176° | Stainless Steel, Steel | 000000 | 000000 | 0000000 | 0000 |
| 30 | 68 | 47.000 - 47.025 | 52.1 | Yes | 350 | 615 | -4° to 176° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
Steel Bearings with Steel Balls | ||||||||||||
| 3 | 10 | 7.000 - 7.015 | __ | No | 15 | 20 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 000000 | 00 |
| 4 | 12 | 8.000 - 8.015 | __ | No | 15 | 25 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 000000 | 00 |
| 5 | 15 | 10.000 - 10.018 | 10.2 | Yes | 35 | 45 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 6 | 19 | 12.000 - 12.018 | 13.5 | Yes | 45 | 55 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 8 | 25 | 16.000 - 16.018 | 16.5 | Yes | 55 | 90 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 10 | 29 | 19.000 - 19.021 | 22 | Yes | 80 | 120 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 12 | 30 | 21.000 - 21.021 | 23 | Yes | 110 | 175 | -4° to 176° | Stainless Steel, Steel | 0000000 | 00000 | 000000000 | 00000 |
| 13 | 32 | 23.000 - 23.021 | 23 | Yes | 110 | 175 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 000 |
| 16 | 36 | 26.000 - 26.021 | 24.9 | Yes | 125 | 200 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 20 | 45 | 32.000 - 32.025 | 31.5 | Yes | 190 | 305 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 25 | 58 | 40.000 - 40.025 | 44.1 | Yes | 220 | 350 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 30 | 68 | 47.000 - 47.025 | 52.1 | Yes | 350 | 615 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 35 | 70 | 52.000 - 52.030 | 49.5 | Yes | 375 | 705 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 40 | 80 | 62.000 - 62.030 | 60.6 | Yes | 485 | 900 | -4° to 176° | Stainless Steel, Steel | 00000000 | 00000 | 0000000 | 0000 |
| 50 | 100 | 75.000 - 75.030 | 77.6 | Yes | 855 | 1,780 | -4° to 176° | Stainless Steel, Steel | 00000000 | 000000 | 0000000 | 0000 |