Use where high loads and speeds are not required.

Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Thermoplastic blend bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE and Rulon J bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Made of thermoplastic, these bearings conduct electricity to prevent static buildup in loads parallel and perpendicular to your shaft. They’re self-lubricating, which reduces friction and prevents wear. They’re often chosen for applications where lubricants or metal bearings can’t be used.

For technical drawings and 3-D models, click on a part number.