McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    Plain Bearing Type
    OD
    Attribute Image
    For Housing ID
    Attribute Image
    Shaft Mount Type
    Flange Thickness
    System of Measurement
    Bearing Type
    Shaft Type
    Lubricant
    Color
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    66 Products

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    Certificate
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Type
    Form
    Each
    841 Bearing Bronze
    1/4"3/8"1/4"1/2"1/16"125 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-35 to 300——6338K41100000
    1/4"3/8"1/4"1/2"1/16"125 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-35 to 300Material CertificatePaper3113K510000
    1/4"3/8"3/8"1/2"1/16"185 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-35 to 300——6338K4120000
    1/4"3/8"3/8"1/2"1/16"185 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-35 to 300Material CertificatePaper3113K520000
    1/4"3/8"1/2"1/2"1/16"250 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-35 to 300——6338K4130000
    1/4"3/8"1/2"1/2"1/16"250 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-35 to 300Material CertificatePaper3113K530000
    1/4"3/8"3/4"1/2"1/16"370 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-35 to 300——6338K4510000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1/4"3/8"3/16"1/2"1/16"90 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K31600000
    1/4"3/8"1/4"1/2"1/16"125 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K10000
    1/4"3/8"3/8"1/2"1/16"185 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K20000
    1/4"3/8"7/16"1/2"1/16"215 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K3170000
    1/4"3/8"1/2"1/2"1/16"250 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K30000
    1/4"3/8"5/8"1/2"1/16"310 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K3180000
    1/4"3/8"3/4"1/2"1/16"370 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic OilPTFE
    		-140 to 4601677K3190000
     

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1/4"3/8"7/16"215 lb. @ 120 rpmMineral Oil10 to 2206391K33200000
    1/4"3/8"9/16"280 lb. @ 120 rpmMineral Oil10 to 2206391K3330000
    1/4"3/8"1 1/8"560 lb. @ 120 rpmMineral Oil10 to 2206391K3340000
    1/4"3/8"1 1/4"620 lb. @ 120 rpmMineral Oil10 to 2206391K3350000
    5/16"3/8"5/16"195 lb. @ 120 rpmMineral Oil10 to 2206391K3370000
     

    Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Flanged Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    Certificate
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Type
    Form
    Each
    High-Strength 932 Bearing Bronze
    5/32"3/8"3/8"7/16"1/16"230 lb. @ 120 rpm520 lb. @ 120 rpm-350 to 450——7815K807000000
    1/4"3/8"1/4"1/2"1/16"250 lb. @ 120 rpm580 lb. @ 120 rpm-350 to 450——7815K110000
    1/4"3/8"1/4"1/2"1/16"250 lb. @ 120 rpm580 lb. @ 120 rpm-70 to 450Material CertificatePaper91786A60700000
    1/4"3/8"3/8"1/2"1/16"370 lb. @ 120 rpm580 lb. @ 120 rpm-350 to 450——7815K120000
    1/4"3/8"3/8"1/2"1/16"370 lb. @ 120 rpm580 lb. @ 120 rpm-70 to 450Material CertificatePaper91786A61200000
    1/4"3/8"1/2"1/2"1/16"500 lb. @ 120 rpm580 lb. @ 120 rpm-350 to 450——7815K130000
    1/4"3/8"1/2"1/2"1/16"500 lb. @ 120 rpm580 lb. @ 120 rpm-70 to 450Material CertificatePaper91786A61700000
    1/4"3/8"3/4"1/2"1/16"750 lb. @ 120 rpm580 lb. @ 120 rpm-350 to 450——7815K140000
     

    Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    1/4"3/8"1/4"250 lb. @ 120 rpm-350 to 4506381K41200000
    1/4"3/8"3/8"370 lb. @ 120 rpm-350 to 4506381K4130000
    1/4"3/8"1/2"500 lb. @ 120 rpm-350 to 4506381K4150000
    1/4"3/8"5/8"620 lb. @ 120 rpm-350 to 4506381K4160000
    1/4"3/8"7/8"870 lb. @ 120 rpm-350 to 4506381K4170000
    1/4"3/8"1"1,000 lb. @ 120 rpm-350 to 4506381K420000
    5/16"3/8"1/4"310 lb. @ 120 rpm-350 to 4506381K4250000
    5/16"3/8"3/8"460 lb. @ 120 rpm-350 to 4506381K4260000
    5/16"3/8"1/2"620 lb. @ 120 rpm-350 to 4506381K4270000
    5/16"3/8"5/8"780 lb. @ 120 rpm-350 to 4506381K4280000
    5/16"3/8"3/4"930 lb. @ 120 rpm-350 to 4506381K4290000
    5/16"3/8"1"1,250 lb. @ 120 rpm-350 to 4506381K430000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1/4"3/8"1/4"125 lb. @ 120 rpmSynthetic OilPTFE
    		-40 to 4601688K400000
    1/4"3/8"3/8"185 lb. @ 120 rpmSynthetic OilPTFE
    		-40 to 4601688K50000
    1/4"3/8"1/2"250 lb. @ 120 rpmSynthetic OilPTFE
    		-40 to 4601688K60000
    1/4"3/8"1"500 lb. @ 120 rpmSynthetic OilPTFE
    		-40 to 4601688K70000
     

    High-Temperature Graphite-Lubricated Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. High-Temperature Graphite-Lubricated Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1/4"3/8"1/4"100 lb. @ 120 rpm-50 to 7009368T1300000
    1/4"3/8"3/8"150 lb. @ 120 rpm-50 to 7009368T140000
    1/4"3/8"1/2"200 lb. @ 120 rpm-50 to 7009368T150000
    1/4"3/8"5/8"250 lb. @ 120 rpm-50 to 7009368T440000
    1/4"3/8"7/8"350 lb. @ 120 rpm-50 to 7009368T1090000
    1/4"3/8"1"400 lb. @ 120 rpm-50 to 7009368T160000
    5/16"3/8"1/4"125 lb. @ 120 rpm-50 to 7009368T450000
    5/16"3/8"3/8"185 lb. @ 120 rpm-50 to 7009368T460000
    5/16"3/8"1/2"250 lb. @ 120 rpm-50 to 7009368T1150000
    5/16"3/8"5/8"310 lb. @ 120 rpm-50 to 7009368T1160000
    5/16"3/8"3/4"370 lb. @ 120 rpm-50 to 7009368T1170000
    5/16"3/8"1"500 lb. @ 120 rpm-50 to 7009368T1180000
     
    High-Strength 932 Bearing Bronze
    1/4"3/8"1/2"430 lb. @ 120 rpm-350 to 4506405K31100000
    1/4"3/8"3/4"650 lb. @ 120 rpm-350 to 4506405K31200000
     

    High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1/4"3/8"1/4"1/2"1/16"100 lb. @ 120 rpm235 lb. @ 120 rpm-50 to 7009440T1100000
    1/4"3/8"3/8"1/2"1/16"150 lb. @ 120 rpm235 lb. @ 120 rpm-50 to 7009440T120000
    1/4"3/8"1/2"1/2"1/16"200 lb. @ 120 rpm235 lb. @ 120 rpm-50 to 7009440T130000
    1/4"3/8"3/4"1/2"1/16"300 lb. @ 120 rpm235 lb. @ 120 rpm-50 to 7009440T140000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1/4"3/8"1/4"1/2"1/16"125 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K200000
    1/4"3/8"3/8"1/2"1/16"185 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K30000
    1/4"3/8"1/2"1/2"1/16"250 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K40000
    1/4"3/8"3/4"1/2"1/16"370 lb. @ 120 rpm290 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K50000
     

    Dry-Running Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings for Food and Beverage.
    Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Ultra-Low-Friction Rulon 641—Get effortless motion with strength surpassing UHMW polyethylene. Rulon 641 bearings can also operate from cryogenic to oven-like temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Specs. Met
    Each
    Ultra-Low-Friction Rulon 641
    5/16"3/8"1/4"9/16"1/32"75 lb. @ 120 rpm95 lb. @ 120 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550, USP Class VI6371K108000000
     
    back to top