McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    Plain Bearing Type
    OD
    Attribute Image
    For Housing ID
    Attribute Image
    Flange Thickness
    Flange OD
    Attribute Image
    Shaft Mount Type
    Shaft Type
    System of Measurement
    Bearing Type
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    8 Products

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    5/8"3/4"1/2"7/8"1/16"620 lb. @ 60 rpm580 lb. @ 60 rpmSynthetic Oil-35 to 3006338K57500000
     

    Dry-Running Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength PEEK—Get the strength of reinforced PTFE without compromising on heat resistance. With no additives, such as polyester fabric, PEEK bearings won’t melt at high temperatures. They’re also nearly as slippery and chemical resistant as plain PTFE.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    High-Strength PEEK
    1/2"3/4"1/2"1"1/8"390 lb. @ 120 rpm460 lb. @ 120 rpmBlack-20 to 4506627K424000000
    1/2"3/4"3/4"1"1/8"590 lb. @ 120 rpm460 lb. @ 120 rpmBlack-20 to 4506627K42500000
    1/2"3/4"1"1"1/8"790 lb. @ 120 rpm460 lb. @ 120 rpmBlack-20 to 4506627K42600000
     

    Dry-Running Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength PEEK—Get the strength of reinforced PTFE without compromising on heat resistance. With no additives, such as polyester fabric, PEEK bearings won’t melt at high temperatures. They’re also nearly as slippery and chemical resistant as plain PTFE.
    Harsh-Environment Vespel® Polyimide—The top choice for equipment exposed to extreme cold, heat, and chemicals. Vespel® bearings also support heavy loads at high speeds.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    High-Strength PEEK
    1/2"3/4"1/2"390 lb. @ 120 rpmBlack-40 to 5006621K138000000
    1/2"3/4"3/4"590 lb. @ 120 rpmBlack-40 to 5006621K13900000
    1/2"3/4"1"790 lb. @ 120 rpmBlack-40 to 5006621K14100000
     
    Harsh-Environment Vespel® Polyimide
    1/2"3/4"1/2"1,200 lb. @ 120 rpmBlack-400 to 55058315K34000000
     
    back to top