McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Diameter
    Attribute Image
    OD
    Attribute Image
    For Housing ID
    Attribute Image
    Plain Bearing Type
    Flange Thickness
    Shaft Mount Type
    Bearing Type
    Lubricant
    Shaft Type
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    70 Products

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    Certificate
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Type
    Form
    Each
    841 Bearing Bronze
    5/8"7/8"1/2"1 1/8"1/8"620 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-35 to 300——0000000000000
    5/8"7/8"5/8"1 1/8"1/8"780 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-35 to 300——000000000000
    5/8"7/8"3/4"1 1/8"1/8"930 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-35 to 300——000000000000
    5/8"7/8"1"1 1/8"1/8"1,250 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-35 to 300——000000000000
    5/8"7/8"1 1/4"1 1/8"1/8"1,550 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-35 to 300——000000000000
    5/8"7/8"1 1/4"1 1/4"1/8"1,550 lb. @ 60 rpm1,800 lb. @ 60 rpmSynthetic Oil-35 to 300——0000000000000
    3/4"7/8"1/2"1 1/8"1/8"750 lb. @ 60 rpm1,100 lb. @ 60 rpmSynthetic Oil-35 to 300——000000000000
    3/4"7/8"1/2"1 1/8"1/8"750 lb. @ 60 rpm1,100 lb. @ 60 rpmSynthetic Oil-35 to 300Material Certificate
    		Paper
    		00000000000
    3/4"7/8"1/2"1 1/4"1/8"750 lb. @ 60 rpm1,550 lb. @ 60 rpmSynthetic Oil-35 to 300——000000000000
    3/4"7/8"3/4"1 1/8"1/8"1,100 lb. @ 60 rpm1,100 lb. @ 60 rpmSynthetic Oil-35 to 300——000000000000
    3/4"7/8"3/4"1 1/4"1/8"1,100 lb. @ 60 rpm1,550 lb. @ 60 rpmSynthetic Oil-35 to 300——000000000000
     
    High-Load 863 Iron Copper
    5/8"7/8"1/2"1 1/8"1/8"1,100 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    5/8"7/8"5/8"1 1/8"1/8"1,350 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    5/8"7/8"3/4"1 1/8"1/8"1,650 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    5/8"7/8"1"1 1/8"1/8"2,200 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    5/8"7/8"1 1/4"1 1/8"1/8"2,750 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    5/8"7/8"1 1/4"1 1/4"1/8"2,750 lb. @ 60 rpm1,600 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    3/4"7/8"1/2"1 1/8"1/8"1,100 lb. @ 60 rpm1,050 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    3/4"7/8"1/2"1 1/4"1/8"1,100 lb. @ 60 rpm1,400 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    3/4"7/8"3/4"1 1/8"1/8"1,650 lb. @ 60 rpm1,050 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
    3/4"7/8"3/4"1 1/4"1/8"1,650 lb. @ 60 rpm1,400 lb. @ 60 rpmSynthetic Oil-15 to 300——00000000000
     

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1/2"7/8"1/2"500 lb. @ 120 rpmSynthetic Oil-35 to 3000000000000000
    1/2"7/8"3/4"750 lb. @ 120 rpmSynthetic Oil-35 to 300000000000000
    1/2"7/8"1"1,000 lb. @ 120 rpmSynthetic Oil-35 to 300000000000000
    1/2"7/8"1 1/4"1,250 lb. @ 120 rpmSynthetic Oil-35 to 300000000000000
    1/2"7/8"1 1/2"1,500 lb. @ 120 rpmSynthetic Oil-35 to 300000000000000
    5/8"7/8"1 5/8"2,000 lb. @ 60 rpmMineral Oil10 to 220000000000000
    5/8"7/8"2"2,500 lb. @ 60 rpmMineral Oil10 to 220000000000000
    11/16"7/8"1 1/8"1,500 lb. @ 60 rpmMineral Oil10 to 220000000000000
    11/16"7/8"1 1/4"1,700 lb. @ 60 rpmMineral Oil10 to 220000000000000
    3/4"7/8"1 5/8"2,400 lb. @ 60 rpmMineral Oil10 to 220000000000000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1/2"7/8"1/2"490 lb. @ 120 rpmSynthetic OilPTFE
    		-40 to 4600000000000000
    5/8"7/8"1/2"620 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    5/8"7/8"3/4"930 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    5/8"7/8"1"1,200 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    5/8"7/8"1 1/2"1,850 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    3/4"7/8"1/2"740 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    3/4"7/8"3/4"1,100 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    3/4"7/8"1"1,500 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 46000000000000
    3/4"7/8"1 1/4"1,850 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
    3/4"7/8"1 1/2"2,200 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 460000000000000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    5/8"7/8"1/2"1 1/8"1/8"620 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4600000000000000
    5/8"7/8"5/8"1 1/8"1/8"780 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 460000000000000
    5/8"7/8"3/4"1 1/8"1/8"930 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 460000000000000
    5/8"7/8"1"1 1/8"1/8"1,250 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 460000000000000
    5/8"7/8"1 1/4"1 1/8"1/8"1,550 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 460000000000000
    3/4"7/8"1/2"1 1/8"1/8"750 lb. @ 60 rpm1,050 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 46000000000000
    3/4"7/8"3/4"1 1/8"1/8"1,100 lb. @ 60 rpm1,100 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 46000000000000
     

    High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    5/8"7/8"1/2"1 1/8"1/8"500 lb. @ 60 rpm1,050 lb. @ 60 rpm-50 to 700000000000000
    5/8"7/8"5/8"1 1/8"1/8"620 lb. @ 60 rpm1,050 lb. @ 60 rpm-50 to 70000000000000
    5/8"7/8"3/4"1 1/8"1/8"750 lb. @ 60 rpm1,050 lb. @ 60 rpm-50 to 70000000000000
    5/8"7/8"1"1 1/8"1/8"1,000 lb. @ 60 rpm1,050 lb. @ 60 rpm-50 to 70000000000000
    5/8"7/8"1 1/4"1 1/8"1/8"1,250 lb. @ 60 rpm1,050 lb. @ 60 rpm-50 to 70000000000000
    3/4"7/8"1/2"1 1/8"1/8"600 lb. @ 60 rpm880 lb. @ 60 rpm-50 to 70000000000000
    3/4"7/8"3/4"1 1/8"1/8"900 lb. @ 60 rpm880 lb. @ 60 rpm-50 to 70000000000000
     

    High-Temperature Graphite-Lubricated Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. High-Temperature Graphite-Lubricated Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    5/8"7/8"5/8"620 lb. @ 60 rpm-50 to 7000000000000000
    5/8"7/8"3/4"750 lb. @ 60 rpm-50 to 70000000000000
    5/8"7/8"1"1,000 lb. @ 60 rpm-50 to 70000000000000
    5/8"7/8"1 1/2"1,500 lb. @ 60 rpm-50 to 700000000000000
    5/8"7/8"1 3/4"1,750 lb. @ 60 rpm-50 to 700000000000000
    3/4"7/8"1/2"600 lb. @ 60 rpm-50 to 70000000000000
    3/4"7/8"5/8"750 lb. @ 60 rpm-50 to 700000000000000
    3/4"7/8"3/4"900 lb. @ 60 rpm-50 to 70000000000000
    3/4"7/8"1"1,200 lb. @ 60 rpm-50 to 70000000000000
    3/4"7/8"1 1/4"1,500 lb. @ 60 rpm-50 to 700000000000000
    3/4"7/8"1 1/2"1,800 lb. @ 60 rpm-50 to 700000000000000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    3/4"7/8"1/2"1 1/8"1/8"750 lb. @ 60 rpm1,100 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570000000000000
     
    High-Load 863 Iron Copper
    3/4"7/8"1/2"1 1/8"1/8"1,100 lb. @ 60 rpm1,050 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.357000000000000
     

    Dry-Running Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings for Food and Beverage.
    Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Ultra-Low-Friction Rulon 641—Get effortless motion with strength surpassing UHMW polyethylene. Rulon 641 bearings can also operate from cryogenic to oven-like temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Specs. Met
    Each
    Ultra-Low-Friction Rulon 641
    5/8"7/8"3/4"1"1/8"460 lb. @ 60 rpm300 lb. @ 60 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550, USP Class VI00000000000000
    3/4"7/8"1"1 1/8"1/16"630 lb. @ 60 rpm310 lb. @ 60 rpmWhite-400 to 550FDA Compliant 21 CFR 177.1550, USP Class VI0000000000000
     
    back to top