About Rod Ends
More
About Ball and Roller Bearings
More
About Shaft Collars
Shaft collars are useful for holding and positioning components on a shaft. They can also serve as mechanical stops and stroke limiters.
More
Light Duty Ball Bearings
Use these bearings where high speed and precision are not a concern.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||
| 1/4" | 1 1/16" | 1/4" | Steel | 560 | 190 | 1,200 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
| 5/16" | 1 1/16" | 3/8" | Steel | 600 | 190 | 1,200 | Lubricated | -20° to 250° | Not Rated | 0000000 | 0000 |
| 3/8" | 1 1/16" | 3/8" | Steel | 630 | 200 | 1,200 | Lubricated | -20° to 250° | Not Rated | 0000000 | 0000 |
| 7/16" | 1 1/16" | 3/8" | Steel | 500 | Not Rated | 1,500 | Required | -20° to 250° | Not Rated | 0000000 | 0000 |
Flanged Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 3/8" | 1 1/16" | 3/8" | 1.182" | 0.06" | 0.688" | 0.438" | Steel | 630 | 210 | 1,200 | Lubricated | -20° to 250° | Not Rated | 00000000 | 00000 |
| 7/16" | 1 1/16" | 3/8" | 1.182" | 0.06" | 0.688" | 0.438" | Steel | 630 | 210 | 1,200 | Lubricated | -20° to 250° | Not Rated | 00000000 | 0000 |
Ball Joint Rod End Inserts
Without changing the ID, these inserts handle some misalignment on rod ends. They attach to your rod end to move your fastener away from the rod-end body.
Washer-style inserts also protect rod ends. They’re commonly known as retaining safety washers.
Cone-style inserts help position rod ends between receiving forks, straps, and clevises.
For technical drawings and 3-D models, click on a part number.
Ball Joint Rod End Reducers
Decrease the ID of your rod end to allow approximately 60° of misalignment. Reducers attach to your rod end to move your fastener away from the rod-end body.
| For Rod End ID | ID | OD | Overall Ht. | Material | Pair | |
| 7/8" | 3/4" | 1 1/16" | 1 1/4" | 17-4 PH Stainless Steel | 000000 | 000000 |
Swivel Joints
Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit. They need to be lubricated when first installed and periodically after that. Apply any type of bearing grease to the ball, and rotate it to work it into the races.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Specifications Met | Each | |
Open | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 5/8" | 1 1/16" | 9/16" | 15/32" | 14° | 14,700 | Bearing Steel | ANSI/ABMA 22.2 | 00000000 | 000000 |
Lightweight Swivel Joints
These nylon swivel joints are 80% lighter than steel swivel joints with better corrosion resistance. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Each | |
| 1/2" | 1 1/16" | 5/8" | 25/64" | 25° | 950 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 000000 |
Thrust-Rated Swivel Joints
A unique design allows these joints to support heavy one-direction thrust loads as well as combined radial/thrust loads. Also known as spherical bearings, you can press them into tight spots where a rod end shank won’t fit or mount them in a drilled hole or a rod end blank.
Lubricate these joints with any type of bearing grease when you install them. Apply the grease to the exposed surface of the ball, then rotate the ball to work the grease into the races. You’ll need to reapply grease regularly.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Static Thrust Load Cap., lbs. | Material | Each | |
| 5/8" | 1 1/16" | 3/8" | 1/4" | 6° | 6,900 | 8,700 | Bearing Steel | 0000000 | 0000000 |
Washdown Clamping Shaft Collars
Suitable for use in washdown applications, these plastic collars also offer good chemical resistance. They clamp evenly around the shaft to create a strong, mar-free hold. To use, slide onto your shaft and tighten the clamping screw to secure.
Acetal collars have a naturally slippery surface and resist swelling when exposed to moisture.
For technical drawings and 3-D models, click on a part number.
Flanged Screw-Clamp Bushings
A mounting flange prevents movement during tightening. These bushings are good for shock loads. When you tighten the included screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | OD | Overall Wd. | Max. Torque, in.-lbs. | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
| 1/2" | 1 1/16" | 13/16" | 460 | 42 | Steel | Clamping Screws | 0000000 | 000000 |
Wheel Bearings
Replace worn or damaged wheel bearings to keep your equipment rolling. Use flanged bearings and ball bearings in pairs. Change the axle diameter with wheel reducer bushings (sold separately).
Note: Not for use in towing applications.
For impact-resistant tapered roller bearings, as well as other bearing materials and sizes, please see Ball and Roller Bearings and Sleeve Bearings. Roller bearings provide smooth rolling.
Retaining washers hold roller bearings in place.
For technical drawings and 3-D models, click on a part number.
| For Axle Dia. | OD | Lg. | Each | |
Roller Bearings | ||||
|---|---|---|---|---|
| 1/2" | 1 1/16" | 1 1/8" | 00000000 | 00000 |