About Rod Ends
More
About Ball and Roller Bearings
More
Selecting Compatible Lead Screws and Nuts
More
One-Way Locking Needle-Roller Bearing Clutches
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches. An arrow on the lip indicates the rotational direction that locks the bearings.
Single-row bearings do not support loads from any direction. To support radial loads, use with our Needle-Roller Bearings.
Bearings with 301 stainless steel springs handle higher temperatures than bearings with acetal springs.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Each | |
Single Row | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Acetal Plastic Springs | ||||||||||
| 1" | 1 5/16" | 5/8" | Steel | 8,700 | 35 | Required | 16 | -20° to 200° | 000000 | 000000 |
301 Stainless Steel Springs | ||||||||||
| 1" | 1 5/16" | 5/8" | Steel | 8,700 | 35 | Required | 16 | -20° to 250° | 0000000 | 00000 |
Ball Joint Rod End Inserts
Without changing the ID, these inserts handle some misalignment on rod ends. They attach to your rod end to move your fastener away from the rod-end body.
Cone-style inserts help position rod ends between receiving forks, straps, and clevises.
For technical drawings and 3-D models, click on a part number.
| For Rod End ID | ID | OD | Overall Ht. | Each | |
Cone | |||||
|---|---|---|---|---|---|
Chrome-Plated Carbon Steel | |||||
| 5/8" | 5/8" | 1 5/16" | 9/16" | 000000000 | 000000 |
Clamping Acme Lead Screw Collars
Thread these one-piece collars onto an Acme lead screw to separate and position components, or use them as an end stop to limit travel. Tighten the clamping screw to secure.
To ensure compatibility, please select a collar that has the same thread type, direction, and size as your lead screw.
Black-oxide carbon steel collars have mild corrosion resistance. 303 stainless steel collars have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Thread Size  | OD | Wd. | No. of Thread Starts | Hardness | Each | |
Right-Hand Threaded | ||||||
|---|---|---|---|---|---|---|
Black-Oxide 1215 Carbon Steel | ||||||
| 5/8"-10 | 1 5/16" | 7/16" | 1 | Brinell 167 | 0000000 | 000000 |
Black-Oxide 12L14 Carbon Steel | ||||||
| 1/2"-10 | 1 5/16" | 1/2" | 1 | Brinell 163 | 0000000 | 00000 |
303 Stainless Steel | ||||||
| 5/8"-8 | 1 5/16" | 7/16" | 1 | Brinell 228 | 0000000 | 00000 |
| 5/8"-10 | 1 5/16" | 7/16" | 1 | Brinell 228 | 0000000 | 00000 |
Left-Hand Threaded | ||||||
Black-Oxide 12L14 Carbon Steel | ||||||
| 1/2"-10 | 1 5/16" | 1/2" | 1 | Brinell 163 | 0000000 | 00000 |
Two-Piece Clamping Acme Lead Screw Collars
Mount these two-piece collars anywhere on an Acme lead screw without removing components. Use them to separate and position components or as an end stop to limit travel. Tighten the clamping screw to secure.
To ensure compatibility, please select a collar that has the same thread type, direction, and size as your lead screw.
Black-oxide carbon steel collars have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Self-Centering Screw-Clamp Bushings
A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket. They are also good for shock loads. When you tighten the included screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | OD | Overall Wd. | Max. Torque, in.-lbs. | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
| 3/4" | 1 5/16" | 31/32" | 1,050 | 42 | Steel | Clamping Screws | 0000000 | 000000 |