McMaster-Carr logo
    Filter by
    System of Measurement
    OD
    Attribute Image
    Bearing Seal Type
    Ball Bearing Profile
    Bearing Trade Number
    Industrial Info Snippet
    Attribute Image
    Maximum Rotation Speed
    Bearing Type
    Industrial Info Compare
    Shaft Mount Type
    For Load Direction
    Industrial Info Compare
    Bearing Construction
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    96 Products

    Permanently Lubricated Ball Bearings

    Image of Product. Front orientation. Ball Bearings. Permanently Lubricated Ball Bearings.
    Install and forget these self-lubricating bearings. Their lubricant is a solid material that fills the space between the balls and releases oil over time, so you'll never need to add more.
    Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.
    Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.
    Corrosion-Resistant 440C Stainless Steel—Combine the strength of steel with the corrosion resistance of stainless steel. These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they'll weaken when exposed to salt water and harsh chemicals, such as bleach.
    ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.
    Temp.
    Range, ° F
    For Shaft
    Dia.
    For Housing
    ID
    Wd.
    ABEC
    Rating
    Dynamic Radial
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Min.
    Max.
    Inner Ring
    Type
    Bearing
    Trade No.
    Each
    Open
     
    Corrosion-Resistant 440C Stainless Steel
    3/4"1 5/8"5/16"11,62010,000-10200StandardR12
    		4668K8000000
     
    Sealed
     
    Corrosion-Resistant 440C Stainless Steel
    3/4"1 5/8"7/16"11,62010,000-10200StandardR12
    		4668K1700000
     

    Thrust Ball Bearings

    Image of Product. Front orientation. Thrust Bearings. Thrust Ball Bearings.
    Image of Attribute. Front orientation. Contains Annotated. Thrust Bearings. Thrust Ball Bearings.
    For silky-smooth motion, the balls inside these bearings roll nearly friction-free. You'll often find them at the end of a shaft or between a stationary and rotating surface, such as on a propeller or rotary table.
    These bearings come as three separate pieces—one cage and two washers. The cage holds the balls in place, while the washers create a surface for the balls to roll on. This design is easy to lubricate, but the oil will attract dust and grime since it's exposed.
    Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
    Stainless Steel—These bearings won't degrade from water or mild chemicals, such as the ammonia in cleaning solutions. However, they're not as strong as steel bearings.
    For Shaft
    Dia.
    OD
    Thk.
    Cage
    Material
    Dynamic Thrust
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Temp. Range,
    ° F
    Includes
    Each
    Steel
    1"1 5/8"0.437"Nylon
    		4505,000-40 to 220Two Washers6655K22000000
     
    Stainless Steel
    1"1 5/8"0.437"Nylon
    		3205,000-40 to 220Two Washers6655K4200000
     

    Swivel Joints

    Image of Product. Front orientation. Swivel Joints. Swivel Joints, Open Bearing.
    Image of Product. Front orientation. Swivel Joints. Swivel Joints, Sealed Bearing.
    Image of Attribute. Front orientation. Contains Annotated. Swivel Joints.

    Open Bearing

    Sealed Bearing

    Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit. They need to be lubricated when first installed and periodically after that. Apply any type of bearing grease to the ball, and rotate it to work it into the races.
    Sealed Bearing—Sealed joints keep grease in and contaminants out.
    ID
    OD
    Overall
    Thk.
    Housing
    Thk.
    Max. Ball
    Swivel
    Static Radial
    Load Cap., lb.
    Material
    Specs. Met
    Each
    Open Bearing
    1"1 5/8"7/8"3/4"13°37,700Bearing SteelANSI/ABMA 22.263195K27000000
     
    Sealed Bearing
    1"1 5/8"7/8"3/4"7°37,700Bearing SteelANSI/ABMA 22.263195K3800000
     

    Needle-Roller Thrust Bearings

    Image of Product. Bearings. Front orientation. Thrust Bearings. Needle-Roller Thrust Bearings.

    Bearings

    Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.
    A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.
    Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
    For Shaft
    Dia.
    OD
    Thk.
    Cage
    Material
    Dynamic Thrust
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Temp. Range,
    ° F
    Each
    Steel
    1 1/16"1 5/8"5/64"Steel3,4008,4000 to 2405909K96800000
     

    Weldable 4130 Alloy Steel Round Tubes

    Image of Product. Front orientation. Steel. Weldable 4130 Alloy Steel Round Tubes.
    Also known as chrome-moly steel, these 4130 alloy steel round tubes have low carbon content for good weldability. They’re often used for roll cages and frames. To increase their wear resistance, you can harden them with heat treating.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    OD
    ID
    Fabrication
    Heat
    Treatable
    Yield Strength,
    psi
    Hardness
    Max. Hardness After
    Heat Treatment
    Specs. Met
    1 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    0.065" Thick Wall
    1 5/8"1.495"SeamlessYes70,000Rockwell C16 (Medium)Rockwell C49SAE AMS6360, SAE AMS-T-673689955K248000000000000000000
     
    0.083" Thick Wall
    1 5/8"1.459"SeamlessYes70,000Rockwell C16 (Medium)Rockwell C49SAE AMS6360, SAE AMS-T-673689955K2580000000000000000
     
    0.095" Thick Wall
    1 5/8"1.435"SeamlessYes70,000Rockwell C16 (Medium)Rockwell C49SAE AMS6360, SAE AMS-T-673689955K3680000000000000000
     

    Oil-Embedded Thrust Bearings

    Image of Product. Front orientation. Thrust Bearings. Oil-Embedded Thrust Bearings.
    Our simplest-to-use thrust bearings, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them. While they run in most conditions, oil may drip away if temperatures climb too high. For extremely hot environments, consider graphite-lubricated bearings. All are fabricated, lubricated, and inspected in the U.S.
    841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.
    For Shaft
    Dia.
    OD
    Thk.
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 5/8"1/16"2,450 lb. @ 60 rpmSynthetic Oil-35 to 3005906K60500000
    1"1 5/8"1/8"2,450 lb. @ 60 rpmSynthetic Oil-35 to 3005906K6060000
    1"1 5/8"1/4"2,500 lb. @ 60 rpmSynthetic Oil-35 to 3005906K5720000
     

    Press-Fit Drill Bushings

    Image of ProductInUse. Front orientation. Contains Annotated. Drill Bushings. Press-Fit Drill Bushings.
    Image of Product. Front orientation. Drill Bushings. Press-Fit Drill Bushings.
    Also known as jig bushings, these drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings.
    Press into place with a manual or hydraulic press. Since these bushings are sized slightly larger than the hole for an extremely tight fit, they’ll stay put permanently. These are ANSI Type P bushings—also known as headless bushings—which means you don’t need to counterbore the hole to mount them flush.
    Don't see the size you need? Additional sizes are available.
    Tolerance
    Each
    OD
    Lg.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    1-9
    10-49
    50-Up
    1.0236" ID
    1 5/8"3/4"26 mm1.0236"0.0002" to 0.0006"0.0019" to 0.0023"-0.01" to 0.01"PSteelRockwell C618491A947000000000000000000
     
    1.1024" ID
    1 5/8"3/4"28 mm1.1024"0.0002" to 0.0006"0.0019" to 0.0023"-0.01" to 0.01"PSteelRockwell C618491A948000000000000000
     
    1.1094" ID
    1 5/8"3/4"1 7/64"1.1094"0.0002" to 0.0006"0.0019" to 0.0023"-0.01" to 0.01"PSteelRockwell C618491A949000000000000000
     
    1.1406" ID
    1 5/8"3/4"1 9/64"1.1406"0.0002" to 0.0006"0.0019" to 0.0023"-0.01" to 0.01"PSteelRockwell C618491A951000000000000000
     
    1.1563" ID
    1 5/8"3/4"1 5/32"1.1563"0.0002" to 0.0006"0.0019" to 0.0023"-0.01" to 0.01"PSteelRockwell C618491A952000000000000000
     
    1.25" ID
    1 5/8"1"1 1/4"1.25"0.0002" to 0.0006"0.0018" to 0.0022"-0.015" to 0.015"PSteelRockwell C613671N222000000000000000
    1 5/8"1 3/8"1 1/4"1.25"0.0002" to 0.0006"0.0018" to 0.0022"-0.015" to 0.015"PSteelRockwell C613671N223000000000000000
    1 5/8"2 1/2"1 1/4"1.25"0.0002" to 0.0006"0.0018" to 0.0022"-0.015" to 0.015"PSteelRockwell C613671N224000000000000000
    1 5/8"3"1 1/4"1.25"0.0002" to 0.0006"0.0018" to 0.0022"-0.015" to 0.015"PSteelRockwell C613671N225000000000000000
     
    1.375" ID
    1 5/8"2"1 3/8"1.375"0.0002" to 0.0006"0.0018" to 0.0022"-0.01" to 0.01"PSteelRockwell C618491A73000000000000000
     

    Dry-Running Metal-Reinforced Plastic Thrust Bearings

    Image of Product. Front orientation. Thrust Bearings. Dry-Running Metal-Reinforced Plastic Thrust Bearings.
    Combine naturally slippery PTFE with the strength of metal. These bearings don't need lubricant, so there's no oil to maintain, drip off, or attract dust. Backed with steel, they're as strong as other all-metal thrust bearings. However, they're best for dry environments since moisture will cause the steel to rust.
    For Shaft
    Dia.
    OD
    Thk.
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    Steel-Backed PTFE
    15/16"1 5/8"1/16"5,500 lb. @ 60 rpm-320 to 5301262N2800000
     

    Ball Joint Rod End Inserts

    Image of System. Shown Installed. Front orientation. Contains Border. Rod End Inserts. Ball Joint Rod End Inserts.

    Shown

    Installed

    Image of Product. Front orientation. Rod End Inserts. Ball Joint Rod End Inserts, Washer Inserts.

    Washer

    Inserts

    Image of Product. Front orientation. Rod End Inserts. Ball Joint Rod End Inserts, Conical Inserts.

    Conical Inserts

    Without changing the ID, these inserts handle some misalignment on rod ends. They attach to your rod end to move your fastener away from the rod-end body.
    Washer Inserts—Washer inserts also protect rod ends. They’re commonly known as retaining safety washers.
    Conical Inserts—Conical inserts help position rod ends between receiving forks, straps, and clevises.
    303 Stainless Steel—303 stainless steel inserts won’t rust in wet, humid, and washdown environments.
    For Rod
    End ID
    ID
    OD
    Overall
    Ht.
    Each
    Washer Inserts
     
    Zinc-Plated Carbon Steel
    3/4"3/4"1 5/8"5/16"95034A700000000
     
    303 Stainless Steel
    3/4"3/4"1 5/8"5/16"95034A36000000
     
    Conical Inserts
     
    Chrome-Plated Carbon Steel
    7/8"7/8"1 5/8"11/16"95034A12200000
     

    Ultra-Low-Friction Oil-Embedded Thrust Bearings

    Image of Product. Front orientation. Thrust Bearings. Ultra-Low-Friction Oil-Embedded Thrust Bearings.
    Our slipperiest metal thrust bearings glide on machines with frequent starts and stops, such as conveyors. Their oil contains nonstick PTFE particles that reduce wear and heat, extending the life of your equipment. All are fabricated, lubricated, and inspected in the U.S.
    841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.
    For Shaft
    Dia.
    OD
    Thk.
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    1"1 5/8"1/16"2,450 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4387421K11800000
    1"1 5/8"1/8"2,450 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4387421K1190000
    1"1 5/8"1/4"2,450 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4387421K12100000
     

    Thrust-Rated Swivel Joints

    Image of Product. Front orientation. Swivel Joints. Thrust-Rated Swivel Joints.
    Image of Attribute. Front orientation. Contains Annotated. Thrust-Rated Swivel Joints.
    A unique design allows these joints to support heavy one-direction thrust loads as well as combined radial/thrust loads. Also known as spherical bearings, you can press them into tight spots where a rod end shank won’t fit or mount them in a drilled hole or a rod end blank.
    Lubricate these joints with any type of bearing grease when you install them. Apply the grease to the exposed surface of the ball, then rotate the ball to work the grease into the races. You’ll need to reapply grease regularly.
    ID
    OD
    Overall
    Thk.
    Housing
    Thk.
    Max. Ball
    Swivel
    Static Radial
    Load Cap., lb.
    Static Thrust
    Load Cap., lb.
    Material
    Each
    1"1 5/8"5/8"7/16"6°19,60022,200Bearing Steel2459K150000000
     

    Self-Adjusting Spring Bushings

    Image of Product. Front orientation. Pulley and Sprocket Bushings. Self-Adjusting Spring Bushings.
    A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit. Made of spring steel, they flex under stress and shock and can handle oscillating or slow rotational motion.
    OD
    Overall
    Wd.
    Material
    Each
    For 1 1/4" Diameter Shafts
    1 5/8"1"Steel58365K109000000
    1 5/8"1 1/4"Steel58365K11100000
    1 5/8"1 1/2"Steel58365K11200000
    1 5/8"2"Steel58365K11300000
     
    For 1 3/8" Diameter Shafts
    1 5/8"1 1/2"Steel58365K11400000
     

    Thrust Bearings

    Image of Product. Front orientation. Thrust Bearings. Thrust Bearings.
    With no moving parts, these bearings are the plainest way to support thrust loads while reducing friction. They don't come with lubricant, so you can choose the oil that's best for your application. Make sure to mount them where they're easy to access, since you'll need to replenish the oil frequently. All are fabricated and inspected in the U.S.
    High-Load 932 Bearing Bronze—Cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze.
    For Shaft
    Dia.
    OD
    Thk.
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Load 932 Bearing Bronze
    1"1 5/8"1/16"3,750 lb. @ 60 rpm-350 to 4507814K4800000
    1"1 5/8"1/4"Not Rated-350 to 4507814K4330000
     

    Extended-Life Swivel Joints

    Image of Product. Front orientation. Swivel Joints. Extended-Life Swivel Joints.
    Image of Attribute. Front orientation. Contains Annotated. Extended-Life Swivel Joints.
    Specially designed lubrication channels and integral seals allow these joints to last up to three times longer than other swivel joints. Also known as spherical bearings, they support angular misalignment. Press into a hole or housing where a ball joint rod end won’t fit. All have seals to keep grease in and contaminants out. Joints come greased and can be lubricated through a hole in the housing without removing the load.
    Temp.
    ID
    OD
    Overall
    Thk.
    Housing
    Thk.
    Max. Ball
    Swivel
    Static Radial
    Load Cap., lb.
    Min.
    Max.,
    ° F
    Material
    Each
    1"1 5/8"7/8"3/4"7°37,700Not Rated250Bearing Steel2699K13000000
     

    Clamping Acme Lead Screw Collars

    Image of Product. Front orientation. Lead Screw Collars. Clamping Acme Lead Screw Collars.
    Thread these one-piece collars onto an Acme lead screw to separate and position components, or use them as an end stop to limit travel. Tighten the clamping screw to secure.
    To ensure compatibility, please select a collar that has the same thread type, direction, size, and number of thread starts as your lead screw.
    Black-Oxide 12L14 Carbon Steel—Black-oxide carbon steel collars have mild corrosion resistance.
    Thread
    Size
    OD
    Wd.
    No. of Thread
    Starts
    Hardness
    Each
    Right-Hand Thread
     
    Black-Oxide 12L14 Carbon Steel
    5/8"-8
    		1 5/8"1/2"1Brinell 1636698K14000000
     

    Clear Scratch- and UV-Resistant Acrylic Round Tubes

    Image of Product. Front orientation. Plastic. Clear Scratch- and UV-Resistant Acrylic Round Tubes.
    When compared to cast acrylic tubes, these extruded acrylic tubes offer nearly the same performance at a fraction of the cost. Use them for sight gauges and protective covers. This scratch- and UV-resistant material stands up to outdoor use better than polycarbonate and maintains clarity over time.
    OD
    ID
    Lg.,
    ft.
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Color
    Flammability
    Rating
    Each
    Standard Tolerance
     
    1/8" Thick Wall
    1 5/8"1 3/8"6Extruded-401809,195 to 11,0300.04ClearUL 94 HB
    		8532K64000000
     

    Shim Assortments for Keyed Shafts

    Image of Product. Front orientation. Shims. For Keyed Shafts, Round, Sold as Assortments.
    When you don’t know the exact shim thickness you’ll need, keep multiple shim thicknesses for keyed shafts on hand so you always have the right one. Fit these notched shims around keyed shafts and arbors that have a key inserted. Use them on keyed shafts to precisely align and space gears, sprockets, and bearings. On keyed arbors, they’re often used to accurately space saw blades and cutters. These shims are often referred to as arbor spacers.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Notch
    No. of
    Pieces
    For Shaft
    Dia.
    ID × OD Included
    Thicknesses Included
    Wd.
    Dp.
    Min.
    Hardness
    Each
    Carbon Steel
    191 1/8"1 1/8" ID × 1 5/8" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"1/4"1/8"Rockwell B843088A533000000
     

    Multipurpose 932 Bearing Bronze Round Tubes

    Image of Product. Front orientation. Bronze. Multipurpose 932 Bearing Bronze Round Tubes.
    Balancing strength, corrosion resistance, and machinability, 932 is everything you want in a bearing bronze. It's most commonly made into thrust bearings and bushings. Also known as SAE 660.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    OD
    ID
    Temper
    Designation
    Specs.
    Met
    3"
    Long
    6 1/2"
    Long
    13"
    Long
    1/8" Thick Wall
    1 5/8"1 3/8"M07ASTM B5058911K412000000000000000000
     
    1/4" Thick Wall
    1 5/8"1 1/8"M07ASTM B5058911K324000000000000000
     

    Shims

    Image of Product. Front orientation. Shims. Sold Individually, Round.
    With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these shims won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Thk.
    Thk. Tolerance
    ID
    Tolerance
    OD Tolerance
    Min.
    Hardness
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1 1/8" ID × 1 5/8" OD
    0.001"-0.0001" to 0.0001"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A141000000
    0.002"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A1830000
    0.003"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A2280000
    0.004"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A2680000
    0.005"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A30900000
    0.006"-0.0006" to 0.0006"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A35100000
    0.007"-0.0007" to 0.0007"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A38900000
    0.008"-0.0008" to 0.0008"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A43000000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A46800000
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A50900000
    0.016"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A55000000
    0.02"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A59100000
    0.025"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A63000000
    0.03"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A66800000
    0.048"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A7090000
    0.062"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A75400000
    0.09"-0.005" to 0.005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A80300000
    0.125"-0.005" to 0.005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240198126A8520000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    1 1/8" ID × 1 5/8" OD
    0.002"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240597022A6210000
    0.005"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240597022A6220000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A39400000
    0.016"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A04900000
    0.02"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A46400000
    0.025"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A78400000
    0.03"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A50900000
    0.045"-0.0035" to 0.0035"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A80300000
    0.06"-0.004" to 0.004"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240597022A5620000
    0.09"-0.008" to 0.008"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240597022A8220000
    0.125"-0.013" to 0.013"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240597022A84500000
     
    Carbon Steel
     
    1 1/8" ID × 1 5/8" OD
    0.001"-0.0003" to 0.0003"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A12700000
    0.002"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A16700000
    0.003"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A18700000
    0.004"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A21700000
    0.005"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A2370000
    0.006"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A2570000
    0.007"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A2770000
    0.008"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A2970000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A3270000
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A3470000
    0.015"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A3670000
    0.02"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A38700000
    0.025"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A41700000
    0.031"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A43700000
    0.047"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A45700000
    0.062"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A47300000
    0.093"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A48800000
    0.125"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B65—103088A51700000
    0.188"-0.007" to 0.007"0" to 0.011"-0.01" to 0.01"Rockwell B65—13088A900000
    0.25"-0.009" to 0.009"0" to 0.011"-0.01" to 0.01"Rockwell B65—13088A97500000
     

    Oil-Embedded 841 Bearing Bronze Round Tubes

    Image of Product. Front orientation. Bronze. Oil-Embedded 841 Bearing Bronze Round Tubes.
    With a porous surface that releases oil over time, this bronze lubricates itself. Turn it into parts that you can't easily access to relubricate, such as bearings, well pumps, and turbine blades. The oil may burn away if temperatures climb too high, however. For extreme heat up to 700° F, consider graphite-embedded bearing bronze instead.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    OD
    ID
    Temper
    Designation
    Specs.
    Met
    3"
    Long
    6 1/2"
    Long
    5/16" Thick Wall
    1 5/8"1"Not RatedASTM B4388931K231000000000000
     

    Shim Assortments

    Image of Product. Front orientation. Shims. Sold as Assortments, Round.
    When you don’t know the exact shim thickness you’ll need, keep multiple shim thicknesses on hand so you always have the right one. With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    No. of
    Pieces
    ID × OD Included
    Thicknesses Included
    Min.
    Hardness
    Each
    Carbon Steel
    191 1/8" ID × 1 5/8" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"Rockwell B843088A937000000
     

    Two-Piece Clamping Acme Lead Screw Collars

    Image of Product. Front orientation. Lead Screw Collars. Two-Piece Clamping Acme Lead Screw Collars.
    Mount these two-piece collars anywhere on an Acme lead screw without removing components. Use them to separate and position components or as an end stop to limit travel. Tighten the clamping screw to secure.
    To ensure compatibility, please select a collar that has the same thread type, direction, size, and number of thread starts as your lead screw.
    Black-Oxide 12L14 Carbon Steel—Black-oxide carbon steel collars have mild corrosion resistance.
    Thread
    Size
    OD
    Wd.
    No. of Thread
    Starts
    Hardness
    Each
    Right-Hand Thread
     
    Black-Oxide 12L14 Carbon Steel
    5/8"-8
    		1 5/8"1/2"1Brinell 1632224N16000000
     
    back to top