About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/2" | 1/2" | 1,250 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 5/8" | 1,550 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 1/2" | 3/4" | 1,850 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 1/2" | 7/8" | 2,150 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 1/2" | 1" | 2,500 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 1/2" | 1 1/4" | 3,100 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 1/2" | 1 3/8" | 3,400 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 1/2" | 1 1/2" | 3,750 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1 1/2" | 1 3/4" | 4,350 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 2" | 5,000 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 2 1/2" | 6,250 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 3" | 7,500 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 4" | 10,000 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
High-Load Dry-Running Sleeve Bearings
Bearings with
6061 Aluminum Shell
A metal shell adds strength.
Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | |||||
|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | |||||
| 1 1/2" | 2" | 5,050 lbs. @ 30 rpm | -400° to 400° | 00000000 | 000000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings handle higher operating temperatures than PTFE or thermoplastic-blend bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Plastic Bearings | ||||||
|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | ||||||
| 1 1/2" | 3/4" | 700 lbs. @ 30 rpm | Gold | -400° to 550° | 0000000 | 000000 |
| 1 1/2" | 1" | 930 lbs. @ 30 rpm | Gold | -400° to 550° | 0000000 | 00000 |
| 1 1/2" | 1 1/2" | 1,400 lbs. @ 30 rpm | Gold | -400° to 550° | 0000000 | 00000 |
| 1 1/2" | 2" | 1,850 lbs. @ 30 rpm | Gold | -400° to 550° | 0000000 | 00000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW and acetal bearings, and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | |||||||
| 1 1/2" | 3/4" | 930 lbs. @ 30 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 000000 |
| 1 1/2" | 1" | 1,250 lbs. @ 30 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 00000 |
| 1 1/2" | 1 1/2" | 1,850 lbs. @ 30 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 000000 |
| 1 1/2" | 2" | 2,500 lbs. @ 30 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 00000 |
Multipurpose Dry-Running Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
For 1 1/4" Shaft Dia. | ||||||
|---|---|---|---|---|---|---|
| 1 1/2" | 1 1/4" | 3,950 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | |||||||
| 1.255" | 1 1/2" | 3/4" | 930 lbs. @ 30 rpm | Maroon | -400° to 550° | 00000000 | 000000 |
| 1.255" | 1 1/2" | 1" | 1,250 lbs. @ 30 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
| 1.255" | 1 1/2" | 1 1/2" | 1,850 lbs. @ 30 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
| 1.255" | 1 1/2" | 2" | 2,500 lbs. @ 30 rpm | Maroon | -400° to 550° | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings stand up to higher temperatures than PTFE and thermoplastic-blend bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | |||||||||
| 1 1/2" | 2" | 1 3/4" | 1/8" | 1,850 lbs. @ 30 rpm | 640 lbs. @ 30 rpm | Gold | -400° to 550° | 0000000 | 0000000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW bearings and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Rulon 641 Plastic Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | ||||||||||
| 1 1/2" | 2" | 1 3/4" | 1/8" | 2,500 lbs. @ 30 rpm | 850 lbs. @ 30 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 00000000 | 0000000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | |||||||||
| 1 1/2" | 1" | 1 3/4" | 3/16" | 3,150 lbs. @ 30 rpm | 2,100 lbs. @ 30 rpm | Blue | -40° to 150° | 000000 | 000000 |
| 1 1/2" | 1 1/4" | 1 3/4" | 1/4" | 3,950 lbs. @ 30 rpm | 2,100 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1 1/2" | 1 1/2" | 1 3/4" | 3/16" | 4,750 lbs. @ 30 rpm | 2,100 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
High-Load Dry-Running Flanged Sleeve Bearings
An aluminum shell adds strength. Made of Frelon, a PTFE composite, these bearings are both slippery and chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | ||||||||
|---|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | ||||||||
| 1 1/2" | 2" | 1 3/4" | 1/8" | 5,050 lbs. @ 30 rpm | 1,700 lbs. @ 30 rpm | -400° to 400° | 00000000 | 000000 |
Water-Resistant Dry-Running Flanged Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | |||||||||
| 1 1/2" | 2" | 1 3/4" | 1/8" | 2,500 lbs. @ 30 rpm | 850 lbs. @ 30 rpm | Maroon | -400° to 550° | 00000000 | 0000000 |