About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1 7/16" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1 3/4" | 1" | 2,850 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
| 1 3/4" | 1 1/2" | 4,300 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 3/4" | 1 3/4" | 5,000 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 3/4" | 2" | 5,750 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1 1/2" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1 3/4" | 5/8" | 5,950 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 000000 |
| 1 3/4" | 1" | 9,500 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 3/4" | 1 1/2" | 14,300 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
| 1 3/4" | 2" | 19,050 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings.
954 aluminum-bronze bearings have high strength and excellent corrosion resistance, making them suitable for use in marine and mining applications.
Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
954 Aluminum-Bronze | ||||||
|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | ||||||
| 1 3/4" | 1 1/2" | 8,750 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 000000 |
| 1 3/4" | 2" | 11,700 lbs. @ 30 rpm | Grooved | -350° to 500° | 0000000 | 00000 |
932 Bearing Bronze | ||||||
For 1 1/2" Shaft Dia. | ||||||
| 1 3/4" | 1" | 5,250 lbs. @ 30 rpm | Grooved | -350° to 450° | 00000000 | 00000 |
| 1 3/4" | 1 3/4" | 9,150 lbs. @ 30 rpm | Grooved | -350° to 450° | 00000000 | 00000 |
| 1 3/4" | 2" | 10,500 lbs. @ 30 rpm | Grooved | -350° to 450° | 00000000 | 00000 |
| 1 3/4" | 3" | 15,750 lbs. @ 30 rpm | Grooved | -350° to 450° | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | ||||||
| 1 3/4" | 1/2" | 3,000 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 1 3/4" | 1" | 6,000 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 1 3/4" | 1 3/4" | 10,500 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 1 3/4" | 2" | 12,000 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 1 3/4" | 2 1/2" | 15,000 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 1 3/4" | 3" | 18,000 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 1 3/4" | 4" | 24,000 lbs. @ 30 rpm | Required | -350° to 450° | 0000000 | 00000 |
Multipurpose Sleeve Bearings with Groove
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 932 bearing bronze is sometimes called 660 leaded bronze.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||
|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | ||||||
| 1 3/4" | 1" | 5,250 lbs. @ 30 rpm | Required | -350° to 450° | 0000000 | 000000 |
| 1 3/4" | 1 3/4" | 9,150 lbs. @ 30 rpm | Required | -350° to 450° | 0000000 | 00000 |
| 1 3/4" | 2 1/2" | 13,100 lbs. @ 30 rpm | Required | -350° to 450° | 0000000 | 00000 |
| 1 3/4" | 3" | 15,750 lbs. @ 30 rpm | Required | -350° to 450° | 0000000 | 00000 |
Corrosion-Resistant Sleeve Bearings with Groove
Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface. The addition of iron and aluminum provides high strength and excellent corrosion resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Iron-copper bearings support heavier loads than 863 iron-copper bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | ||||||||||
| 1 3/4" | 3/4" | 2" | 3/32" | 3,300 lbs. @ 30 rpm | 3,000 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
| 1 3/4" | 1" | 2" | 3/32" | 4,450 lbs. @ 30 rpm | 3,000 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Iron-Copper Bearings | ||||||||||
For 1 1/2" Shaft Dia. | ||||||||||
| 1 3/4" | 1 1/2" | 2" | 3/16" | 14,300 lbs. @ 30 rpm | 6,550 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | 10° to 220° | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
932 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | ||||||||||
| 1 3/4" | 3/4" | 2" | 3/32" | 4,500 lbs. @ 30 rpm | 5,450 lbs. @ 30 rpm | Required | -350° to 450° | __ | 00000000 | 000000 |
| 1 3/4" | 1" | 2" | 3/32" | 6,000 lbs. @ 30 rpm | 5,450 lbs. @ 30 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
| 1 3/4" | 1 1/2" | 2" | 3/16" | 9,000 lbs. @ 30 rpm | 5,450 lbs. @ 30 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | |||||||||
| 1 3/4" | 1 1/2" | 2" | 3/16" | 9,000 lbs. @ 30 rpm | 5,450 lbs. @ 30 rpm | Required | -70° to 450° | 000000000 | 000000 |