We will reply to your message within an hour.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
The flange ensures proper positioning inside a tube or housing.
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.
A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.
These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.
Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.
Use where high loads and speeds are not required.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Good for underwater applications, these bearings won’t swell or warp when wet.
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.
Also known as Oilite® bearings.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.
Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.
The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.
The choice for low-friction motion in high-temperature environments.
Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.
Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.
Thinner than standard linear sleeve bearings, these bearings fit where clearance is a concern.
Use these ultra-thin sleeve bearings in high-speed applications where clearance is a concern.
The flanged housing makes these bearings a good solution for vertical linear motion applications.
The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.
Precisely align, level, and adjust spacing on fasteners and shafts with these shims.
Spin these shims onto screw threads to extend the shoulder length.