McMaster-Carr logo
    Filter by
    System of Measurement
    OD
    Attribute Image
    Installation Permanence
    Drill Bushing Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Drill Bushing Texture
    Shape
    Head OD
    Attribute Image
    Minimum Hardness
    Sold As
    Shaft Type
    Head Thickness
    Attribute Image
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    103 Products

    Press-Fit Drill Bushings

    Image of ProductInUse. Front orientation. Contains Annotated. Drill Bushings. Press-Fit Drill Bushings.
    Image of Product. Front orientation. Drill Bushings. Press-Fit Drill Bushings.
    Also known as jig bushings, these drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings.
    Press into place with a manual or hydraulic press. Since these bushings are sized slightly larger than the hole for an extremely tight fit, they’ll stay put permanently. These are ANSI Type P bushings—also known as headless bushings—which means you don’t need to counterbore the hole to mount them flush.
    Don't see the size you need? Additional sizes are available.
    Tolerance
    Each
    OD
    Lg.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    1-9
    10-49
    50-Up
    0.04" ID
    13/64"1/4"60 Ga.0.04"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A096000000000000000000
    13/64"3/8"60 Ga.0.04"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A098000000000000000
    13/64"3/4"60 Ga.0.04"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A100000000000000000
     
    0.041" ID
    13/64"1/2"59 Ga.0.041"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A109000000000000000
     
    0.042" ID
    13/64"1/4"58 Ga.0.042"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A116000000000000000
    13/64"1/2"58 Ga.0.042"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A119000000000000000
     
    0.043" ID
    13/64"1/4"57 Ga.0.043"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A126000000000000000
     
    0.0465" ID
    13/64"1/4"56 Ga.0.0465"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A136000000000000000
    13/64"3/4"56 Ga.0.0465"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A140000000000000000
     
    0.0469" ID
    13/64"1/4"3/64"0.0469"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A146000000000000000
    13/64"3/8"3/64"0.0469"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A148000000000000000
    13/64"1/2"3/64"0.0469"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A149000000000000000
    13/64"3/4"3/64"0.0469"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A150000000000000000
     
    0.052" ID
    13/64"1/4"55 Ga.0.052"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A156000000000000000
    13/64"3/8"55 Ga.0.052"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A158000000000000000
    13/64"3/4"55 Ga.0.052"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A160000000000000000
     
    0.055" ID
    13/64"3/4"54 Ga.0.055"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A170000000000000000
     
    0.0595" ID
    13/64"1/2"53 Ga.0.0595"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A179000000000000000
    13/64"3/4"53 Ga.0.0595"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A180000000000000000
     
    0.0625" ID
    13/64"1/4"1/16"0.0625"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A1880000000000000
    13/64"5/16"1/16"0.0625"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A1890000000000000
    13/64"3/8"1/16"0.0625"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A1900000000000000
    13/64"1/2"1/16"0.0625"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A19100000000000000
    13/64"3/4"1/16"0.0625"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A19200000000000000
    13/64"1"1/16"0.0625"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A19300000000000000
    13/64"1 3/8"1/16"0.0625"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A19400000000000000
     
    0.0635" ID
    13/64"1/2"52 Ga.0.0635"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A20300000000000000
     
    0.067" ID
    13/64"5/16"51 Ga.0.067"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A2130000000000000
    13/64"1/2"51 Ga.0.067"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A21500000000000000
     
    0.07" ID
    13/64"1/4"50 Ga.0.07"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A2220000000000000
    13/64"1/2"50 Ga.0.07"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A22500000000000000
    13/64"1"50 Ga.0.07"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A22700000000000000
     
    0.073" ID
    13/64"1/2"49 Ga.0.073"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A23800000000000000
    13/64"1 3/8"49 Ga.0.073"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A24100000000000000
     
    0.076" ID
    13/64"1/4"48 Ga.0.076"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A2480000000000000
    13/64"3/8"48 Ga.0.076"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A2500000000000000
    13/64"1"48 Ga.0.076"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A25300000000000000
     
    0.0781" ID
    13/64"1"5/64"0.0781"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A26200000000000000
     
    0.0785" ID
    13/64"1/2"47 Ga.0.0785"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A27300000000000000
    13/64"1"47 Ga.0.0785"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A27500000000000000
     
    0.081" ID
    13/64"3/4"46 Ga.0.081"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A28500000000000000
     
    0.086" ID
    13/64"1/4"44 Ga.0.086"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3060000000000000
    13/64"1/2"44 Ga.0.086"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A30900000000000000
    13/64"1"44 Ga.0.086"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A31100000000000000
     
    0.089" ID
    13/64"1/2"43 Ga.0.089"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A31900000000000000
    13/64"1"43 Ga.0.089"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A32100000000000000
    13/64"1 3/8"43 Ga.0.089"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A32200000000000000
     
    0.0935" ID
    13/64"3/8"42 Ga.0.0935"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3290000000000000
    13/64"1/2"42 Ga.0.0935"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A33000000000000000
    13/64"1"42 Ga.0.0935"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A33200000000000000
    13/64"1 3/8"42 Ga.0.0935"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A33300000000000000
     
    0.0938" ID
    13/64"1/4"3/32"0.0938"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3360000000000000
    13/64"5/16"3/32"0.0938"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3370000000000000
    13/64"3/8"3/32"0.0938"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3380000000000000
    13/64"1/2"3/32"0.0938"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A33900000000000000
    13/64"3/4"3/32"0.0938"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A34000000000000000
    13/64"1"3/32"0.0938"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A34100000000000000
    13/64"1 3/8"3/32"0.0938"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A34200000000000000
     
    0.096" ID
    13/64"3/8"41 Ga.0.096"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3500000000000000
    13/64"3/4"41 Ga.0.096"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A35200000000000000
    13/64"1 3/8"41 Ga.0.096"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A35400000000000000
     
    0.098" ID
    13/64"1/4"40 Ga.0.098"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A592000000000000000
    13/64"5/16"40 Ga.0.098"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A598000000000000000
    13/64"1/2"40 Ga.0.098"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A599000000000000000
    13/64"3/4"40 Ga.0.098"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A36000000000000000
     
    0.0995" ID
    13/64"3/8"39 Ga.0.0995"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3740000000000000
    13/64"1/2"39 Ga.0.0995"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3750000000000000
    13/64"1"39 Ga.0.0995"0.0001" to 0.0004"0.0012" to 0.0015"-0.01" to 0.01"PSteelRockwell C6196511A3770000000000000
     

    Press-Fit Drill Bushings with Head

    Image of Product. Front orientation. Contains Annotated. Drill Bushings. Press-Fit Drill Bushings with Head.
    Image of Attribute. Front orientation. Contains Annotated. Press-Fit Drill Bushings with Head.
    Image of Specification. Shown in Countersunk Hole. Front orientation. CrossSection view. Drill Bushings. Press-Fit Drill Bushings with Head.
    Image of Specification. Shown in Standard Hole. Front orientation. CrossSection view. Drill Bushings. Press-Fit Drill Bushings with Head.

    Shown in

    Countersunk

    Hole

    Shown in

    Standard Hole

    A flanged head on these bushings acts as a stop, so they won’t press through your jig even under extreme drilling pressure. They’re ANSI Type H bushings, also known as headed bushings. The head adds support and protects the jig from damage caused by heavy use, so they’re often used in jigs made of thin or soft materials. These bushings guide your drill bit, reamer, or other cutting bit to create accurate, consistent holes from one workpiece to the next. They’re also used as spacers, shims, and machinery bushings. Made of hardened, ground steel, they hold their shape and resist wear, so they last for many cycles without needing to be replaced.
    To install, fit the bushing into a hole in your jig. In a standard hole, the head will sit above the jig plate; to mount flush, install in a countersunk hole. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once it’s centered, press the bushing into place with a hydraulic or lever press.
    Don't see the size you need? Additional sizes are available.
    Head
    Tolerance
    Each
    OD
    Lg.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    OD
    Thk.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    1-5
    6-11
    12-Up
    0.086" ID
    13/64"1/4"44 Ga.0.086"19/64"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"HSteelRockwell C618492A001000000000000000000
     
    0.089" ID
    13/64"1/4"43 Ga.0.089"19/64"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"HSteelRockwell C618492A002000000000000000
     
    0.0938" ID
    13/64"1/4"3/32"0.0938"19/64"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"HSteelRockwell C618492A003000000000000000
    13/64"3/8"3/32"0.0938"19/64"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"HSteelRockwell C618492A013000000000000000
    13/64"1/2"3/32"0.0938"19/64"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"HSteelRockwell C618492A023000000000000000
     

    Wear-Resistant Press-Fit Drill Bushings

    Image of Product. Front orientation. Drill Bushings. Wear-Resistant Press-Fit Drill Bushings.
    Made of durable tungsten carbide, these bushings outlast steel. Mount flush with jig plates for precise drilling. Drill bushings can also be used as spacers, shims, and machinery bushings.
    Also Available: Other sizes. Please select 33455A999 and specify ID, OD, and length.
    Tolerance
    OD
    Lg.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    Each
    0.0938" ID
    13/64"1/2"3/32"0.0938"0.0001" to 0.0005"0.0013" to 0.0018"-0.01" to 0.01"PCTungsten CarbideRockwell A8933455A123000000
     

    Shims

    Image of Product. Front orientation. Shims. Round, Sold Individually.
    With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these shims won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.
    Material Certificate—Shims include a report with a traceable lot number.
    Thk.
    Thk. Tolerance
    ID
    Tolerance
    OD Tolerance
    Min.
    Hardness
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    3/32" ID × 13/64" OD
    0.001"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A201000000
    0.002"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A20200000
    0.003"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A20300000
    0.004"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A20400000
    0.005"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A20500000
    0.006"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A20600000
    0.008"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A20800000
    0.01"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B70Material Certificate
    		2599040A21000000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A21200000
    0.014"-0.001" to 0.003"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A21400000
    0.016"-0.002" to 0.002"0" to 0.005"-0.005" to 0.005"Rockwell B70—2599040A21600000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    3/32" ID × 13/64" OD
    0.005"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B90—1090917A33500000
    0.006"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B90—1090917A33600000
    0.008"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B90—1090917A33700000
    0.01"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B90—1090917A33800000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B90Material Certificate
    		1090917A33900000
    0.014"-0.001" to 0.003"0" to 0.005"-0.005" to 0.005"Rockwell B90Material Certificate
    		1090917A34000000
    0.016"-0.002" to 0.002"0" to 0.005"-0.005" to 0.005"Rockwell B90—1090917A34100000
     
    Brass
     
    3/32" ID × 13/64" OD
    0.001"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2010000
    0.002"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2020000
    0.003"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2030000
    0.004"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2040000
    0.005"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2050000
    0.006"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2060000
    0.008"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2070000
    0.01"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2080000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2090000
    0.014"-0.001" to 0.003"0" to 0.005"-0.005" to 0.005"Rockwell B70—1093268A2100000
    0.016"-0.002" to 0.002"0" to 0.005"-0.005" to 0.005"Rockwell B70Material Certificate
    		1093268A2110000
     
    back to top