McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    System of Measurement
    OD
    Attribute Image
    Plain Bearing Type
    For Housing ID
    Attribute Image
    Flange OD
    Attribute Image
    Shaft Mount Type
    Bearing Type
    Flange Thickness
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Shaft Type
    Lubrication Method
    DFARS Specialty Metals
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    43 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    12188290 lb. @ 120 rpmSynthetic Oil-35 to 3006658K15900000
    121810370 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1610000
    121812440 lb. @ 120 rpmSynthetic Oil-35 to 3006658K170000
    121816590 lb. @ 120 rpmSynthetic Oil-35 to 3006658K180000
    121820740 lb. @ 120 rpmSynthetic Oil-35 to 3006658K190000
    121825930 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1620000
    141814600 lb. @ 60 rpmSynthetic Oil-35 to 3006658K210000
    141818780 lb. @ 60 rpmSynthetic Oil-35 to 3006658K220000
    141820860 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1660000
    141822950 lb. @ 60 rpmSynthetic Oil-35 to 3006658K230000
     
    High-Strength 863 Iron Copper
    121812520 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3420000
    121816700 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3430000
    1418141,200 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3460000
    1418221,900 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3480000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    12188243290 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K23900000
    121812243440 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K2410000
    121820243740 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K2420000
    141814222600 lb. @ 60 rpm690 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K2430000
     
    High-Strength 863 Iron Copper
    12188243350 lb. @ 120 rpm620 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007119N1380000
    121812243520 lb. @ 120 rpm620 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007119N1390000
    121820243870 lb. @ 120 rpm620 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007119N1410000
    1418142221,200 lb. @ 60 rpm900 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N1420000
    1418182221,550 lb. @ 60 rpm900 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N1430000
    1418222221,900 lb. @ 60 rpm900 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N1440000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    12188243290 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic Oil-35 to 3006659K1700000
    121812243440 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic Oil-35 to 3006659K180000
    121820243740 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic Oil-35 to 3006659K190000
    141814222600 lb. @ 60 rpm700 lb. @ 60 rpmSynthetic Oil-35 to 3006659K210000
    141818222780 lb. @ 60 rpm700 lb. @ 60 rpmSynthetic Oil-35 to 3006659K220000
    141822222950 lb. @ 60 rpm700 lb. @ 60 rpmSynthetic Oil-35 to 3006659K230000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    121812440 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K15200000
    121816590 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1530000
    121820740 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1540000
    141814600 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1560000
    141818780 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1570000
     
    High-Strength 863 Iron Copper
    121812520 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007460N1520000
    121816700 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007460N1530000
    1418221,900 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007460N1580000
     

    Dry-Running Metal-Reinforced Plastic Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Metal-Reinforced Plastic Sleeve Bearings.
    Combine slippery plastic with the strength of metal. The PTFE core is naturally slippery, so you’ll never have to add lubricant. These bearings also keep your workspace clean with no lubricant to drip or flake and attract dust. Compared to all-metal bearings, they are lighter.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Bronze-Backed PTFE with Steel Shell—A good all-around, economical choice. Although these bearings are stronger than aluminum, they can only be used in dry environments where corrosion is not a concern.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    Bronze-Backed PTFE with Steel Shell
    1618202,500 lb. @ 60 rpm-320 to 5306679K1900000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    121816590 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K15300000
    121820740 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1540000
     
    High-Strength 863 Iron Copper
    121812520 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1520000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    121820243740 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K7200000
     
    back to top