About Plain Bearings
More
High-Load Dry-Running Sleeve Bearings
Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||
| 19/32" | 5/8" | 990 lbs. @ 120 rpm | -320° to 530° | 0000000 | 00000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Thermoplastic-blend bearings create the least amount of friction of any bearings that we offer. They handle heavier loads than PTFE and Rulon J bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Thermoplastic blend bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE and Rulon J bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic Blend Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1/2" Shaft Dia. | |||||||||
| 19/32" | 1/4" | 7/8" | 1/16" | 110 lbs. @ 120 rpm | 205 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 000000 |
| 19/32" | 3/8" | 7/8" | 1/16" | 165 lbs. @ 120 rpm | 205 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 00000 |
| 19/32" | 1/2" | 7/8" | 1/16" | 220 lbs. @ 120 rpm | 205 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 00000 |
| 19/32" | 3/4" | 7/8" | 1/16" | 330 lbs. @ 120 rpm | 205 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 00000 |
Ring Shims
Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
Stainless steel shims are more corrosion resistant than steel shims. 316 stainless steel shims have the best corrosion resistance of our stainless steel shims.
For technical drawings and 3-D models, click on a part number.
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
0.001" Thick. (-0.0003" to 0.0003" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 5 | 000000000 | 00000 |
0.002" Thick. (-0.0003" to 0.0003" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
0.003" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 00000 |
0.005" Thick. (-0.0005" to 0.0005" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
0.01" Thick. (-0.001" to 0.001" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
0.016" Thick. (-0.002" to 0.002" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
0.02" Thick. (-0.0025" to 0.0025" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
0.025" Thick. (-0.0025" to 0.0025" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
0.03" Thick. (-0.003" to 0.003" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
0.045" Thick. (-0.0035" to 0.0035" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 00000 |
0.06" Thick. (-0.004" to 0.004" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 00000 |
1/8" Thick. (-0.013" to 0.013" Tolerance) | |||||||||
| 5/16" | 0" to 0.011" | 19/32" | -0.002" to 0.002" | 316 Stainless Steel | Rockwell B70 | ASTM A240 | 5 | 000000000 | 00000 |