We will reply to your message within an hour.
These steel ball bearings handle higher loads than stainless steel and plastic bearings.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.
The flange ensures proper positioning inside a tube or housing.
Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.
These bearings have twice as many contact points as angular-contact ball bearings.
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.
These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
Use where high loads and speeds are not required.
Graphite provides a layer of dry lubrication that can operate in high-temperature environments.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Good for underwater applications, these bearings won’t swell or warp when wet.
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
The choice for low-friction motion in high-temperature environments.
Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.
Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.
Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible.
Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.
Ball bearings create less friction than sleeve bearings, so they require less force to operate.
Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.
These bearings have a ceramic liner to help them achieve high speeds as well as rapid acceleration and deceleration.
The flanged housing makes these bearings a good solution for vertical linear motion applications.
Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
A slippery PTFE liner reduces wear and eliminates the need for lubrication.
These nylon swivel joints are 80% lighter than steel swivel joints with better corrosion resistance.
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.
Precisely align, level, and adjust spacing on fasteners and shafts with these shims.
With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place.
Often paired with spring lock washers to strengthen their hold, these retaining nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle.