About Plain Bearings
More
About Ball and Roller Bearings
More
Self-Aligning Flanged Ball Bearings
No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment. The flange ensures proper positioning inside a tube or housing.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Stainless steel bearings are more corrosion resistant than steel bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
Steel | |||||||||||||
| 10mm | 23.95mm | 10mm | 25.4mm | 0.75mm | 385 | 180 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 000000 |
440C Stainless Steel | |||||||||||||
| 10mm | 23.95mm | 10mm | 25.4mm | 0.75mm | 325 | 140 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
Shielded | |||||||||||||
Steel | |||||||||||||
| 10mm | 23.95mm | 10mm | 25.4mm | 0.75mm | 380 | 180 | 37,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 000000 | 00000 |
Sealed | |||||||||||||
Steel | |||||||||||||
| 10mm | 23.95mm | 10mm | 25.4mm | 0.75mm | 385 | 180 | 18,500 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
440C Stainless Steel | |||||||||||||
| 10mm | 23.95mm | 10mm | 25.4mm | 0.75mm | 325 | 140 | 18,500 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 18mm Shaft Dia. | ||||||||||
| 24mm | 12mm | 30mm | 3mm | 1,300 lbs. @ 60 rpm | 2,800 lbs. @ 60 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
For 20mm Shaft Dia. | ||||||||||
| 24mm | 16mm | 28mm | 2mm | 1,950 lbs. @ 60 rpm | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
| 24mm | 20mm | 28mm | 2mm | 2,450 lbs. @ 60 rpm | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 00000 |
| 24mm | 25mm | 28mm | 2mm | 3,100 lbs. @ 60 rpm | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | __ | 0000000 | 00000 |