28.04mm OD Bearings | McMaster-Carr

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 20 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
28	25	1,550 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
28	30	1,850 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
28	40	2,450 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
28	50	3,100 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
For 22 mm Shaft Dia.
28	18	1,200 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	0000
28	20	1,350 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
28	22	1,500 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	0000
28	25	1,700 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
28	30	2,000 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

Food Industry Oil-Embedded Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 22mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
28mm	18mm	1,200 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	00000000	000000
28mm	22mm	1,500 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	00000000	00000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 22mm Shaft Dia.
28mm	15mm	34mm	3mm	1,000 lbs. @ 60 rpm	1,600 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	00000
28mm	20mm	34mm	3mm	1,350 lbs. @ 60 rpm	1,600 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	0000

Food Industry Oil-Embedded Flanged Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant, so they're safe for use in food applications.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 22mm Shaft Dia.
28mm	20mm	34mm	3mm	1,350 lbs. @ 60 rpm	1,600 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	FDA Compliant 21 CFR 178.3570	00000000	000000

High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings
For Housing ID, mm	Length, mm	Flange OD, mm	Flange Thickness, mm	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
22 mm Shaft Dia.
28	20	34	3	1,750 lbs. @ 60 rpm	1,350 lbs. @ 60 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	000000