McMaster-Carr logo
    Filter by
    System of Measurement
    OD
    Attribute Image
    Installation Permanence
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Drill Bushing Type
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Drill Bushing Texture
    Shaft Type
    Head Thickness
    Attribute Image
    Head OD
    Attribute Image
    Specifications Met
    Sold As
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    219 Products

    Press-Fit Drill Bushings

    Image of ProductInUse. Front orientation. Contains Annotated. Drill Bushings. Press-Fit Drill Bushings.
    Image of Product. Front orientation. Drill Bushings. Press-Fit Drill Bushings.
    Also known as jig bushings, these drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings.
    Press into place with a manual or hydraulic press. Since these bushings are sized slightly larger than the hole for an extremely tight fit, they’ll stay put permanently. These are ANSI Type P bushings—also known as headless bushings—which means you don’t need to counterbore the hole to mount them flush.
    Don't see the size you need? Additional sizes are available.
    Tolerance
    Each
    OD
    Lg.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    1-9
    10-49
    50-Up
    0.052" ID
    3/16"1/4"55 Ga.0.052"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A001000000000000000000
     
    0.0595" ID
    3/16"1/4"53 Ga.0.0595"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A652000000000000000
    3/16"3/8"53 Ga.0.0595"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C613671N111000000000000000
    3/16"1/2"53 Ga.0.0595"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C613671N112000000000000000
     
    0.0625" ID
    3/16"1/4"1/16"0.0625"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A002000000000000000
    3/16"5/16"1/16"0.0625"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A1860000000000000
    3/16"3/8"1/16"0.0625"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A012000000000000000
    3/16"1/2"1/16"0.0625"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A022000000000000000
    3/16"5/8"1/16"0.0625"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A18700000000000000
    3/16"3/4"1/16"0.0625"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A043000000000000000
     
    0.0635" ID
    3/16"1/4"52 Ga.0.0635"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A8010000000000000
    3/16"5/16"52 Ga.0.0635"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A1950000000000000
    3/16"3/8"52 Ga.0.0635"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A1960000000000000
    3/16"1/2"52 Ga.0.0635"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A19700000000000000
    3/16"5/8"52 Ga.0.0635"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A19800000000000000
     
    0.067" ID
    3/16"1/4"51 Ga.0.067"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A6550000000000000
    3/16"5/16"51 Ga.0.067"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2070000000000000
    3/16"3/8"51 Ga.0.067"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2080000000000000
    3/16"1/2"51 Ga.0.067"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A20900000000000000
    3/16"5/8"51 Ga.0.067"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A21000000000000000
    3/16"3/4"51 Ga.0.067"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A21100000000000000
     
    0.07" ID
    3/16"1/4"50 Ga.0.07"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A0030000000000000
    3/16"5/16"50 Ga.0.07"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2190000000000000
    3/16"3/8"50 Ga.0.07"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A013000000000000000
    3/16"1/2"50 Ga.0.07"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A023000000000000000
    3/16"5/8"50 Ga.0.07"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A22000000000000000
    3/16"3/4"50 Ga.0.07"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A22100000000000000
     
    0.073" ID
    3/16"1/4"49 Ga.0.073"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2290000000000000
    3/16"5/16"49 Ga.0.073"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2300000000000000
    3/16"1/2"49 Ga.0.073"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A23200000000000000
     
    0.076" ID
    3/16"3/8"48 Ga.0.076"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2440000000000000
    3/16"1/2"48 Ga.0.076"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A24500000000000000
     
    0.0781" ID
    3/16"1/4"5/64"0.0781"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A0040000000000000
    3/16"5/16"5/64"0.0781"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2550000000000000
    3/16"3/8"5/64"0.0781"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A014000000000000000
    3/16"1/2"5/64"0.0781"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C618491A024000000000000000
    3/16"5/8"5/64"0.0781"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A25600000000000000
    3/16"3/4"5/64"0.0781"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A045000000000000000
     
    0.0785" ID
    3/16"1/4"47 Ga.0.0785"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2640000000000000
    3/16"3/8"47 Ga.0.0785"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2660000000000000
     
    0.081" ID
    3/16"1/4"46 Ga.0.081"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A0050000000000000
    3/16"5/16"46 Ga.0.081"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2770000000000000
    3/16"3/8"46 Ga.0.081"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A015000000000000000
    3/16"1/2"46 Ga.0.081"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A27800000000000000
     
    0.082" ID
    3/16"1/4"45 Ga.0.082"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2880000000000000
    3/16"3/8"45 Ga.0.082"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A2900000000000000
     
    0.0846" ID
    3/16"1/4"2.15 mm0.0846"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C618491A919000000000000000
     
    0.086" ID
    3/16"1/4"44 Ga.0.086"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A0060000000000000
    3/16"5/16"44 Ga.0.086"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3010000000000000
    3/16"3/8"44 Ga.0.086"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3020000000000000
    3/16"1/2"44 Ga.0.086"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A30300000000000000
    3/16"3/4"44 Ga.0.086"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A30500000000000000
     
    0.089" ID
    3/16"1/4"43 Ga.0.089"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A0070000000000000
    3/16"5/16"43 Ga.0.089"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3130000000000000
    3/16"3/8"43 Ga.0.089"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A017000000000000000
    3/16"1/2"43 Ga.0.089"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A027000000000000000
    3/16"5/8"43 Ga.0.089"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A31400000000000000
    3/16"3/4"43 Ga.0.089"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A31500000000000000
     
    0.0935" ID
    3/16"1/4"42 Ga.0.0935"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A0080000000000000
    3/16"5/16"42 Ga.0.0935"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3230000000000000
    3/16"3/8"42 Ga.0.0935"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A018000000000000000
    3/16"1/2"42 Ga.0.0935"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A32400000000000000
    3/16"3/4"42 Ga.0.0935"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A32600000000000000
     
    0.0938" ID
    3/16"1/4"3/32"0.0938"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A0090000000000000
    3/16"5/16"3/32"0.0938"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3340000000000000
    3/16"3/8"3/32"0.0938"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A019000000000000000
    3/16"1/2"3/32"0.0938"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A029000000000000000
    3/16"5/8"3/32"0.0938"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A33500000000000000
    3/16"3/4"3/32"0.0938"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A048000000000000000
    3/16"7/8"3/32"0.0938"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C613671N115000000000000000
     
    0.096" ID
    3/16"1/4"41 Ga.0.096"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3430000000000000
    3/16"5/16"41 Ga.0.096"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3440000000000000
    3/16"3/8"41 Ga.0.096"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3450000000000000
    3/16"1/2"41 Ga.0.096"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A803000000000000000
    3/16"3/4"41 Ga.0.096"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A34700000000000000
     
    0.098" ID
    3/16"1/4"40 Ga.0.098"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A7820000000000000
    3/16"5/16"40 Ga.0.098"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3550000000000000
    3/16"3/8"40 Ga.0.098"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A3560000000000000
    3/16"1/2"40 Ga.0.098"0.0001" to 0.0004"0.0013" to 0.0016"-0.015" to 0.015"PSteelRockwell C618491A783000000000000000
    3/16"3/4"40 Ga.0.098"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A35800000000000000
     
    0.0995" ID
    3/16"1/4"39 Ga.0.0995"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A366000000000000000
    3/16"1/2"39 Ga.0.0995"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A369000000000000000
    3/16"5/8"39 Ga.0.0995"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A370000000000000000
    3/16"3/4"39 Ga.0.0995"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C6196511A371000000000000000
     
    0.126" ID
    3/16"1/4"3.2 mm0.126"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C618491A928000000000000000
     
    0.1299" ID
    3/16"1/4"3.3 mm0.13"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C618491A929000000000000000
     
    0.13" ID
    3/16"1/4"3.3 mm0.13"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C618491A931000000000000000
     

    Press-Fit Reamer Bushings

    Image of ProductInUse. Front orientation. Drill Bushings. Press-Fit Reamer Bushings.
    Image of Product. Front orientation. Drill Bushings. Press-Fit Reamer Bushings.
    With ID tolerances sized specifically for reamers, these bushings ensure steady and precise hole finishing. Press them into a fixture plate with a manual or hydraulic press for permanent installation. Also known as headless bushings, these ANSI-type P bushings don’t need counterboring to be mounted flush. They are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.
    For Reamer
    Tolerance
    ID
    OD
    Lg.
    Dia.
    Gauge
    Size
    Fractional
    Size
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    Each
    0.0635"3/16"1/4"0.0635"52 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12000000
    0.064"3/16"1/4"0.064"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12100000
    0.0645"3/16"1/4"0.0645"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12200000
    0.065"3/16"1/4"0.065"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12300000
    0.066"3/16"1/4"0.066"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12400000
    0.067"3/16"1/4"0.067"51 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12500000
    0.068"3/16"1/4"0.068"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12600000
    0.069"3/16"1/4"0.069"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12700000
    0.07"3/16"1/4"0.07"50 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12800000
    0.0705"3/16"1/4"0.0705"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N12900000
    0.071"3/16"1/4"0.071"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N1300000
    0.072"3/16"1/4"0.072"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13100000
    0.073"3/16"1/4"0.073"49 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13200000
    0.075"3/16"1/4"0.075"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13300000
    0.077"3/16"1/4"0.077"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13400000
    0.0775"3/16"1/4"0.0775"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13500000
    0.078"3/16"1/4"0.078"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13600000
    0.0781"3/16"1/4"0.0781"—5/64"0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13700000
    0.0785"3/16"1/4"0.0785"47 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13800000
    0.079"3/16"1/4"0.079"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N13900000
    0.0795"3/16"1/4"0.0795"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N1400000
    0.08"3/16"1/4"0.08"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14100000
    0.0805"3/16"1/4"0.0805"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14200000
    0.081"3/16"1/4"0.081"46 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14300000
    0.082"3/16"1/4"0.082"45 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14400000
    0.083"3/16"1/4"0.083"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14500000
    0.084"3/16"1/4"0.084"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14600000
    0.085"3/16"1/4"0.085"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14700000
    0.086"3/16"1/4"0.086"44 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14800000
    0.09"3/16"1/4"0.09"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N14900000
    0.091"3/16"1/4"0.091"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N1500000
    0.092"3/16"1/4"0.092"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15100000
    0.0925"3/16"1/4"0.0925"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15200000
    0.093"3/16"1/4"0.093"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15300000
    0.0935"3/16"1/4"0.0935"42 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15400000
    0.0938"3/16"1/4"0.0938"—3/32"0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15500000
    0.094"3/16"1/4"0.094"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15600000
    0.0945"3/16"1/4"0.0945"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15700000
    0.095"3/16"1/4"0.095"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15800000
    0.0955"3/16"1/4"0.0955"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N15900000
    0.096"3/16"1/4"0.096"41 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N1600000
    0.0965"3/16"1/4"0.0965"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N16100000
    0.097"3/16"1/4"0.097"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N16200000
    0.0975"3/16"1/4"0.0975"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N16300000
    0.098"3/16"1/4"0.098"40 Ga.—0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N16400000
    0.0985"3/16"1/4"0.0985"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N16500000
    0.099"3/16"1/4"0.099"——0.0005" to 0.0008"0.0013" to 0.0016"-0.01" to 0.01"PSteelRockwell C619473N16600000

    Weldable 4130 Alloy Steel Round Tubes

    Image of Product. Front orientation. Steel. Weldable 4130 Alloy Steel Round Tubes.
    Also known as chrome-moly steel, these 4130 alloy steel round tubes have low carbon content for good weldability. They’re often used for roll cages and frames. To increase their wear resistance, you can harden them with heat treating.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    OD
    ID
    Fabrication
    Heat
    Treatable
    Yield Strength,
    psi
    Hardness
    Max. Hardness After
    Heat Treatment
    Specs. Met
    1 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    0.035" Thick Wall
    3/16"0.118"SeamlessYes70,000Rockwell C16 (Medium)Rockwell C49SAE AMS6360, SAE AMS-T-673689955K11900000000000000000
     

    Removable Drill Bushings

    Image of System. Front orientation. CrossSection view. Contains Annotated. Drill Bushings. Removable Drill Bushings.
    Image of System. Front orientation. CrossSection view. Contains Annotated. Drill Bushings. Removable Drill Bushings.
    Image of Product. Front orientation. Drill Bushings. Removable Drill Bushings.
    Image of Attribute. Front orientation. Contains Annotated. Drill Bushings. Removable Drill Bushings.
    Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves (sold separately). By swapping in a bushing with a different ID, you can change the size of your bit and still use the same hole in your fixture. All are made to tight dimensional tolerances for consistent, accurate results, even as you change them in and out. They're also known as slip-fixed and renewable bushings.
    Choose a sleeve with a length that matches the length of your bushing. To prevent bushings from spinning inside the sleeve as you drill, pair a standard sleeve with a lock screw, or use a locking sleeve. For faster placement in and removal from sleeves, use a handle.
    Head
    Tolerance
    Each
    OD
    Lg.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    OD
    Thk.
    Lock Screw/Bushing
    Ctr.-to-Ctr.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    1-5
    6-11
    12-Up
    0.0135" ID
    3/16"1/4"80 Ga.0.0135"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.015" to 0.015"SFSteelRockwell C618493A075000000000000000000
     
    0.0469" ID
    3/16"1/4"3/64"0.0469"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.01" to 0.01"SFSteelRockwell C618493A511000000000000000
     
    0.0635" ID
    3/16"1/4"52 Ga.0.0635"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.01" to 0.01"SFSteelRockwell C618493A512000000000000000
     
    0.067" ID
    3/16"1/4"51 Ga.0.067"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.01" to 0.01"SFSteelRockwell C618493A513000000000000000
     
    0.07" ID
    3/16"1/4"50 Ga.0.07"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.01" to 0.01"SFSteelRockwell C618493A514000000000000000
     
    0.0781" ID
    3/16"1/4"5/64"0.0781"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.01" to 0.01"SFSteelRockwell C618493A515000000000000000
     
    0.0785" ID
    3/16"1/2"47 Ga.0.0785"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.015" to 0.015"SFSteelRockwell C618493A309000000000000000
     
    0.081" ID
    3/16"1/4"46 Ga.0.081"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.01" to 0.01"SFSteelRockwell C618493A516000000000000000
     
    0.086" ID
    3/16"1/4"44 Ga.0.086"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.01" to 0.01"SFSteelRockwell C618493A517000000000000000
     
    0.089" ID
    3/16"1/4"43 Ga.0.089"5/16"3/16"17/64"0.0001" to 0.0004"-0.0002" to 0"-0.01" to 0.01"SFSteelRockwell C618493A518000000000000000
     
    Accessories for Drill Bushings
    Drill Bushing Lock Screws
    Image of Product. Front orientation. Drill Bushing Lock Screws. Removable Drill Bushings, Slotted Drive.
    Image of Product. Front orientation. Drill Bushing Lock Screws. Removable Drill Bushings, Hex Drive.
    Image of Attribute. Front orientation. Removable Drill Bushings.

    Slotted Drive

    Hex Drive

    Lock screws thread into a hole in your jig. The head of the screw fits into a notch on the bushing's head, which keeps the bushing from spinning.
    Shoulder
    For Bushing
    OD
    Thread
    Size
    Head
    OD
    Overall
    Lg.
    Head-to-Shoulder
    Lg.
    Lg.
    Wd.
    Hex
    Size
    For Drill
    Bushing Type
    Material
    Pkg.
    Qty.
    Pkg.
    Slotted Drive
    3/16"8-32
    		5/16"7/16"3/16"0.1"3/16"—SFSteel108496A26000000
     
    Hex Drive
    3/16"8-32
    		5/16"7/16"3/16"0.1"3/16"3/32"SFSteel108496A3400000
     
    Drill Bushing Sleeves
    Image of Product. Front orientation. Drill Bushing Sleeves. Removable Drill Bushings.
    For Bushing
    OD
    ID
    OD
    Lg.
    ID Tolerance
    For Drill
    Bushing Type
    Material
    Hardness
    Sleeve
    ANSI No.
    Each
    3/16"3/16"5/16"3/8"0.0001" to 0.0004"SFSteelRockwell C61L-20-63556N11300000
    3/16"3/16"5/16"1/2"0.0001" to 0.0004"SFSteelRockwell C61L-20-83556N1140000
    Drill Bushing Lock Sleeves
    Image of System. Front orientation. CrossSection view. Contains Annotated. Drill Bushing Lock Sleeves. Removable Drill Bushings.
    Image of Product. Smooth. Front orientation. Drill Bushing Lock Sleeves. Removable Drill Bushings, Smooth.
    Image of Attribute. Front orientation. Contains Annotated, MultipleImages. Drill Bushing Lock Sleeves. Removable Drill Bushings.

    Smooth

    Lock sleeves act as a sleeve and lock screw at the same time. They have a raised flange that fits into the notch on the bushing's head, keeping the bushing in place.
    Smooth—Smooth sleeves are slightly oversized for a snug fit. They’re usually installed in metal tooling—press them into place with a manual or hydraulic press.
    Smooth
    For Bushing
    OD
    ID
    OD
    Lg.
    Head
    Dia.
    Flange
    Distance
    ID Tolerance
    For Drill
    Bushing Type
    Material
    Hardness
    Each
    3/16"3/16"5/16"11/16"23/64"1/4"0.0001" to 0.0004"SFSteelRockwell C6131425A34000000

    Finish-Your-Own Press-Fit Drill Bushings

    Image of Product. Front orientation. Drill Bushings. Finish-Your-Own Press-Fit Drill Bushings.
    Larger OD tolerances than standard press-fit bushings allow finishing. These bushings should be machine ground. Mount flush with jig plates for precise drilling. Drill bushings can also be used as spacers, shims, and machinery bushings.
    Tolerance
    OD
    Lg.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    Each
    0.0938" ID
    3/16"1/2"3/32"0.0938"0.0001" to 0.0004"0.0095" to 0.015"-0.015" to 0.015"PSteelRockwell C614315A11000000
     

    Press-Fit Drill Bushings with Head

    Image of Product. Front orientation. Contains Annotated. Drill Bushings. Press-Fit Drill Bushings with Head.
    Image of Attribute. Front orientation. Contains Annotated. Press-Fit Drill Bushings with Head.
    Image of Specification. Shown in Countersunk Hole. Front orientation. CrossSection view. Drill Bushings. Press-Fit Drill Bushings with Head.
    Image of Specification. Shown in Standard Hole. Front orientation. CrossSection view. Drill Bushings. Press-Fit Drill Bushings with Head.

    Shown in

    Countersunk

    Hole

    Shown in

    Standard Hole

    A flanged head on these bushings acts as a stop, so they won’t press through your jig even under extreme drilling pressure. They’re ANSI Type H bushings, also known as headed bushings. The head adds support and protects the jig from damage caused by heavy use, so they’re often used in jigs made of thin or soft materials. These bushings guide your drill bit, reamer, or other cutting bit to create accurate, consistent holes from one workpiece to the next. They’re also used as spacers, shims, and machinery bushings. Made of hardened, ground steel, they hold their shape and resist wear, so they last for many cycles without needing to be replaced.
    To install, fit the bushing into a hole in your jig. In a standard hole, the head will sit above the jig plate; to mount flush, install in a countersunk hole. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once it’s centered, press the bushing into place with a hydraulic or lever press.
    Don't see the size you need? Additional sizes are available.
    Head
    Tolerance
    Each
    OD
    Lg.
    For Drill
    Bit Size
    For Drill Bit Size
    Decimal Equiv.
    OD
    Thk.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    1-5
    6-11
    12-Up
    0.0635" ID
    3/16"1/4"52 Ga.0.0635"5/16"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"HSteelRockwell C618492A512000000000000000000
     
    0.07" ID
    3/16"1/4"50 Ga.0.07"5/16"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"HSteelRockwell C618492A513000000000000000
     
    0.0781" ID
    3/16"1/4"5/64"0.0781"5/16"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"HSteelRockwell C618492A514000000000000000
     
    0.096" ID
    3/16"1/4"41 Ga.0.096"5/16"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"HSteelRockwell C618492A515000000000000000
     
    0.0995" ID
    3/16"1/4"39 Ga.0.0995"5/16"3/32"0.0001" to 0.0004"0.0013" to 0.0016"-0.01" to 0.01"HSteelRockwell C618492A516000000000000000
     

    Shims

    Image of Product. Front orientation. Shims. Sold Individually, Round.
    With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these shims won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.
    Material Certificate—Shims include a report with a traceable lot number.
    Thk.
    Thk. Tolerance
    ID
    Tolerance
    OD Tolerance
    Min.
    Hardness
    Specs.
    Met
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/8" ID × 3/16" OD
    0.001"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——2599040A301000000
    0.001"-0.0003" to 0.0003"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0110000
    0.002"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70—Material Certificate
    		2599040A30200000
    0.002"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0130000
    0.003"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——2599040A30300000
    0.003"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0150000
    0.004"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——2599040A30400000
    0.004"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0170000
    0.005"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0190000
    0.005"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——2599040A30500000
    0.006"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——2599040A30600000
    0.008"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——2599040A30800000
    0.01"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B70—Material Certificate
    		2599040A31000000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0210000
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0230000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B70—Material Certificate
    		2599040A31200000
    0.014"-0.001" to 0.003"0" to 0.005"-0.005" to 0.005"Rockwell B70—Material Certificate
    		2599040A31400000
    0.015"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0250000
    0.016"-0.002" to 0.002"0" to 0.005"-0.005" to 0.005"Rockwell B70——2599040A31600000
    0.02"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0270000
    0.025"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—598126A0290000
    0.03"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240Material Certificate
    		598126A03100000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    1/8" ID × 3/16" OD
    0.001"-0.0003" to 0.0003"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A8640000
    0.002"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240Material Certificate
    		597022A8660000
    0.003"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A8680000
    0.004"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240Material Certificate
    		597022A8710000
    0.005"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B90——1090917A42500000
    0.005"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A8730000
    0.006"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B90——1090917A42600000
    0.008"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B90——1090917A42700000
    0.01"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B90——1090917A42800000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A8750000
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A8770000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B90——1090917A42900000
    0.014"-0.001" to 0.003"0" to 0.005"-0.005" to 0.005"Rockwell B90——1090917A43000000
    0.016"-0.002" to 0.002"0" to 0.005"-0.005" to 0.005"Rockwell B90——1090917A43100000
    0.016"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A8790000
    0.02"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A8820000
    0.025"-0.0025" to 0.0025"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A8840000
    0.03"-0.003" to 0.003"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A88600000
    0.06"-0.004" to 0.004"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240—597022A60100000
    0.125"-0.013" to 0.013"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240Material Certificate
    		597022A60200000
     
    Carbon Steel
     
    1/8" ID × 3/16" OD
    0.001"-0.0003" to 0.0003"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1340000
    0.002"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1360000
    0.003"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1380000
    0.004"-0.0005" to 0.0005"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1410000
    0.005"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1430000
    0.01"-0.001" to 0.001"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1450000
    0.015"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1470000
    0.02"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1490000
    0.025"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1520000
    0.031"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B65——53088A1540000
     
    Brass
     
    1/8" ID × 3/16" OD
    0.001"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3010000
    0.002"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3020000
    0.003"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3030000
    0.004"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3040000
    0.005"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3050000
    0.006"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3060000
    0.008"-0.0005" to 0.0005"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3070000
    0.01"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3080000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3090000
    0.014"-0.001" to 0.003"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3100000
    0.016"-0.002" to 0.002"0" to 0.005"-0.005" to 0.005"Rockwell B70——1093268A3110000
     
    back to top