Filter by
System of Measurement
OD
Bearing Type
Plain Bearing Type
Lubrication
Shaft Type
For Load Direction
Performance
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Dynamic Thrust Load Capacity @ Speed
Bushing Type
Base Oil
Maximum Temperature
Minimum Temperature
P Max
PV Max
V Max
Oil-Embedded Thrust Bearings
 |
Our simplest-to-use thrust bearings, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them. While they run in most conditions, oil may drip away if temperatures climb too high. For extremely hot environments, consider graphite-lubricated bearings. All are fabricated, lubricated, and inspected in the U.S.
841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.
Quick-Grip Flanged Hydraulic Bushings
 |
 |
Tighten just one set screw to clamp these bushings evenly around your shaft. The screw forces hydraulic fluid in between the double-walled sleeve, expanding the two walls against the shaft and the hub of your sprocket, pulley, or gear for a tight hold. Since you don’t have to tighten multiple screw clamps individually, these bushings are quick to adjust and more likely to stay aligned on your shaft. They’re also good for shock loads. A mounting flange prevents movement during tightening. Use a hex key to tighten.
Note: To avoid deforming the sleeve walls, make sure to fully tighten the screw.
17-4 PH Stainless Steel—17-4 PH stainless steel bushings have excellent corrosion resistance in most environments.
