35.04mm OD Bearings | McMaster-Carr

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 25 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
35	25	1,900 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
35	30	2,300 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
35	35	2,700 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
35	50	3,850 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
For 30 mm Shaft Dia.
35	25	2,300 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
35	30	2,750 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

863 iron-copper bearings are also known as Super Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 25mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
35mm	25mm	2,150 lbs. @ 60 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000

High-Load Food Industry Oil-Embedded Sleeve Bearings

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.

Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID	Length	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 25mm Shaft Dia.
35mm	35mm	3,050 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	ASTM B439, NSF Registered H1	00000000	000000