About Plastic
More
About Washers
More
About Ball and Roller Bearings
More
About Plain Bearings
More
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | |||||||||||||||
Open | |||||||||||||||
| 5" | 5 1/2" | 1/4" | 850 | 1,550 | 1,400 | 3,950 | 130 | 340 | 500 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 0000000 |
Oil-Embedded Thrust Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD | Thick. | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 5 1/2" | 1/8" | 12,500 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
932 Bearing Bronze Tubes
- Yield Strength: 18,000 psi
- Hardness: Rockwell B35 (Soft)
- Temper: M07
- Heat Treatable: No
- Specifications Met: ASTM B505
Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Weldable 954 Bearing Bronze Tubes
- Yield Strength: 32,000 psi
- Hardness: Rockwell B85 (Medium)
- Temper: M07
- Heat Treatable: Yes
- Specifications Met: ASTM B505
954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Easy-to-Machine 936 Bearing Bronze Tubes
- Yield Strength: 21,000 psi
- Hardness: Rockwell B25 (Soft)
- Temper: M07
- Heat Treatable: No
- Specifications Met: ASTM B505
An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64. Use it to machine bearings and bushings for oil pumps and gasoline engines.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Spring Lock Washers for Slotted Bearing Nuts
Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle. They also have an inner tab that sits in the shaft or spindle’s keyway to prevent the nut from loosening.
Steel washers are strong and flexible.
Stainless steel washers are more corrosion and chemical resistant than steel washers.
For technical drawings and 3-D models, click on a part number.
Tab | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Screw Size  | ID | OD | Thick. | Wd. | Dp. | Overall Ht. | Hardness | Specifications Met | For Bearing Nut Specifications Met | Each | |
Steel | |||||||||||
For Chamfered Nuts—with External Teeth | |||||||||||
| 3 7/8" | 3.988" | 5.500" | 0.100" | 0.353" | 0.171" | 0.344" | Not Rated | ANSI/ABMA 8.2 | ANSI/ABMA 8.2 | 000000000 | 000000 |
Stainless Steel | |||||||||||
For Chamfered Nuts—with External Teeth | |||||||||||
| 3 7/8" | 3.988" | 5.500" | 0.100" | 0.353" | 0.171" | 0.344" | Not Rated | ANSI/ABMA 8.2 | ANSI/ABMA 8.2 | 000000000 | 000000 |
Positioning Turntables
Simplify tasks such as spray painting, repair work, and inspection with these turntables that rotate to expose every side of an object while working.
For technical drawings and 3-D models, click on a part number.
MDS-Filled Easy-to-Machine Wear-Resistant Cast Nylon Tubes
- Color: Black
- Maximum Temperature: 230° F
- Tensile Strength: 10,000 psi (Good)
- Impact Strength: 1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM D5989
The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes. Tubes can be used to fabricate pulleys, bushings, and bearings installed in hard-to-reach areas where adding a lubricant would be difficult. The OD is oversized and the ID is undersized to allow for finishing to the sizes listed. This material is comparable to Nylatron and Nycast.
For technical drawings and 3-D models, click on a part number.
Heat-Stabilized Easy-to-Machine Wear-Resistant Cast Nylon Tubes
- Color: Blue
- Maximum Temperature: 250° F
- Tensile Strength: 10,000-13,500 psi (Good)
- Impact Strength: 1-2.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R120 (Hard)
- For Use Outdoors: Yes
A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes. This material is comparable to Nylatron and Nycast.
For technical drawings and 3-D models, click on a part number.