60 mm OD Bearings | McMaster-Carr

Filter by

System of Measurement

Shaft Diameter

DFARS Compliance

Shaft Type

Lubrication

Maximum Temperature

Minimum Temperature

Bearing Type

RoHS Compliance

Thickness

For Load Direction

Plain Bearing Type

REACH Compliance

Bearing Seal Type

Cage Material

Dynamic Thrust Load Capacity

Static Thrust Load Capacity

Ball Material

Material

Washer Material

Ball Bearing Profile

Forward

How can we improve?

39 Products

About Ball and Roller Bearings

About Plain Bearings

About Linear Bearings

Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.

Bearings with steel cage and with bronze cage handle higher loads and speeds than bearings with a plastic cage.

For technical drawings and 3-D models, click on a part number.

					Thrust Load Cap., lbs.
For Shaft Dia.	OD	Thick.	Cage Material	Washer Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	Includes		Each
Open
30mm	60mm	21mm	Steel	Steel	9,600	17,600	3,900	Required	-40° to 250°	Two Washers	00000000	000000
40mm	60mm	16mm	Steel	Steel	5,650	12,100	4,000	Required	-40° to 240°	Two Washers	0000000	00000

Needle-Roller Thrust Bearings

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.

For technical drawings and 3-D models, click on a part number.

Bearings

Bearing

			Thrust Load Cap., lbs.
For Shaft Dia.	OD	Thick.	Dynamic	Static	Max. Speed, rpm	Lubrication	For Shaft Surface Smoothness (Ra), microns	Temp. Range, °F	Specifications Met		Each
Steel Rollers
Open
40mm	60mm	3mm	6,300	25,500	6,000	Required	0.2	0° to 240°	DIN 5405-2	000000	000000

Washers

Washer

For Shaft Dia.	OD	Thick.	Washer Material	Specifications Met		Each
40mm	60mm	1mm	Steel	DIN 5405-3, ISO 303	00000000	00000
40mm	60mm	3.5mm	Steel	__	00000000	00000

Washers for Needle-Roller Thrust Bearings

Washer

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

For technical drawings and 3-D models, click on a part number.

For Shaft Dia.	OD	Thick.	Washer Material	Specifications Met		Each
40mm	60mm	1mm	Steel	DIN 5405-3, ISO 303	00000000	00000
40mm	60mm	3.5mm	Steel	__	00000000	00000

Cylindrical-Roller Thrust Bearings

Cylindrical-roller thrust bearings handle higher loads than needle-roller thrust bearings. They also run at faster speeds than tapered-roller thrust bearings.

For technical drawings and 3-D models, click on a part number.

			Thrust Load Cap., lbs.
For Shaft Dia., mm	OD, mm	Thick., mm	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	Includes		Each
Steel Rollers
Open
40	60	13	12,550	33,250	5,900	Required	-25° to 245°	Two Washers	0000000	0000000

Light Duty Dry-Running Sleeve Bearings

Use where high loads and speeds are not required.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric Nylon Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Color	Temperature Range, °F		Each
For 50mm Shaft Dia.
60mm	40mm	500 lbs. @ 30 rpm	Off-White	-10° to 220°	00000000	000000
60mm	50mm	620 lbs. @ 30 rpm	Off-White	-10° to 220°	00000000	00000
60mm	60mm	750 lbs. @ 30 rpm	Off-White	-10° to 220°	00000000	00000

Multipurpose Sleeve Bearings with Groove

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 932 bearing bronze is sometimes called 660 leaded bronze.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 932 Bearing Bronze
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 50mm Shaft Dia.
60mm	75mm	20,300 lbs. @ 30 rpm	Required	-350° to 450°	00000000	000000

Oil-Embedded Thrust Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 30 mm Shaft Dia.
OD, mm	Thick., mm	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
60	4	6,550 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000
60	5	6,550 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
For 35 mm Shaft Dia.
60	4	3,800 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
For 40 mm Shaft Dia.
60	4	4,850 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

Ultra-Low-Friction Oil-Embedded Thrust Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric SAE 841 Bronze Bearings

For 30mm Shaft Dia.
OD, mm	Thick., mm	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
60	4	6,550 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	ASTM B438	0000000	000000
60	5	6,550 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	ASTM B438	0000000	00000
For 35mm Shaft Dia.
60	4	7,700 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	ASTM B438	00000000	00000
For 40mm Shaft Dia.
60	4	4,850 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	ASTM B438	0000000	00000

High-Load Ultra-Low-Friction Oil-Embedded Thrust Bearings

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. Startup friction causes a thin layer of PTFE to release onto the surface. Thanks to their high iron content, they also resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings. They’re thrust bearings, which means they support loads parallel to the shaft.

For technical drawings and 3-D models, click on a part number.

Metric 863 Iron-Copper Bearings

For 30mm Shaft Dia.
OD, mm	Thickness, mm	Dynamic Thrust Load Capacity	Lubrication	Lubrication Method	Temp. Range, °F		Each
60	4	6,200 lbs. @ 30 rpm	Lubricated	Embedded	-60° to 300°	0000000	000000
For 40mm Shaft Dia.
60	4	4,550 lbs. @ 30 rpm	Lubricated	Embedded	-60° to 300°	0000000	00000

High-Load Oil-Embedded Thrust Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.

863 iron-copper bearings are also known as Super Oilite® bearings.

Iron-copper bearings support heavier loads than 863 iron-copper bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 30mm Shaft Dia.
OD	Thick.	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
60mm	4mm	6,200 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000
60mm	5mm	6,200 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000
For 40mm Shaft Dia.
60mm	4mm	4,550 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000

Iron-Copper Bearings

For 40mm Shaft Dia.
OD	Thick.	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
60mm	4mm	9,800 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	0000000	000000

Food Industry Oil-Embedded Thrust Bearings

The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food. Startup friction causes them to release a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 30mm Shaft Dia.
OD	Thick.	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
60mm	5mm	6,550 lbs. @ 30 rpm	Lubricated	SAE 20 Oil	-75° to 300°	FDA Compliant 21 CFR 178.3570, NSF Registered H1	00000000	000000
For 40mm Shaft Dia.
60mm	4mm	4,850 lbs. @ 30 rpm	Lubricated	SAE 20 Oil	-75° to 300°	FDA Compliant 21 CFR 178.3570, NSF Registered H1	00000000	00000

Light Duty Dry-Running Thrust Bearings

Use where high loads and speeds are not required.

Thermoplastic bearings are fiber reinforced and lubricant infused for good wear resistance and low friction with light and medium loads.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Thermoplastic Blend Bearings
OD	Thick.	Dynamic Thrust Load Capacity	Color	Temp. Range, °F		Each
For 40 mm Shaft Dia.
60mm	3.5mm	260 lbs. @ 30 rpm	Gray	-40° to 260°	0000000	000000
For 48 mm Shaft Dia.
60mm	2mm	170 lbs. @ 30 rpm	Gray	-40° to 260°	0000000	00000

Corrosion-Resistant Thrust Bearings

The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

954 Aluminum-Bronze Bearings
OD	Thick.	Dynamic Thrust Load Capacity	Lubrication	Temperature Range, °F		Each
For 45mm Shaft Dia.
60mm	3mm	Not Rated	Required	-350° to 500°	0000000	000000

Multipurpose Thrust Bearings

These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 932 Bearing Bronze
OD	Thick.	Dynamic Thrust Load Capacity	Lubrication	Temperature Range, °F		Each
For 30mm Shaft Dia.
60mm	4mm	Not Rated	Required	-350° to 450°	00000000	00000

Linear and Rotary Ball Bearings

With End Seals

Engineered for simultaneous linear and rotary motion, these bearings are used with round end-supported shafts. The fixed-alignment design is for use where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).

Bearings with end seals are designed to keep lubricant in and dirt out.

For technical drawings and 3-D models, click on a part number.

Bearings												External Retaining Rings
For Shaft Dia.	Overall Lg.	For Housing ID	Retaining Ring Groove End-to-End Lg.	Dynamic Load Capacity, lbs.	Dynamic Rotary Load Capacity	Max. Speed, rpm	Max. Temperature, ° F	Max. Stroke Lg.	For Shaft Material		Each	Pkg. Qty.		Pkg.
Fixed Alignment
Steel Bearings with End Seals
40mm	80mm	60.0000mm - 60.0300mm	64.9mm	925	384 lbs. @ 500 rpm	5,000	200°	91mm	Stainless Steel, Steel	000000	000000	1	0000000	00000

High-Temperature Linear Ball Bearings

Bearing with Retaining Ring Grooves

The choice for low-friction motion in high-temperature environments. Bearings are for use with round end-supported shafts and have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included). For bearings with retaining ring grooves, secure with two retaining rings (sold individually).

For technical drawings and 3-D models, click on a part number.

Fixed Alignment–Metric

Bearings
					Load Capacity, lbs.							External Retaining Rings
For Shaft Diameter, mm	Overall Lg., mm	For Housing ID, mm	Retaining Ring Groove End-to-End Length, mm	With End Seals	Dynamic	Static	Dynamic Load Capacity at Maximum Temperature	Temperature Range, ° F	For Shaft Material		Each		Each
Steel Bearings with Steel Balls
40	80	60.000 - 60.030	60.5	No	485	900	485 lbs. @ 230° F	-4° to 230°	Stainless Steel, Steel	00000000	0000000	0000000	00000

Corrosion-Resistant Flange-Mounted Linear Ball Bearings

Round Flange

The bearing, housing, and balls of these mounted bearings are stainless steel for excellent corrosion resistance. The flanged housing is good for vertical linear motion applications. All bearings are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.

For technical drawings and 3-D models, click on a part number.

Fixed Alignment–Metric

	Overall							Load Capacity, lbs.				Mounting Holes
For Shaft Dia., mm	Lg., mm	Wd., mm	Ht., mm	Flange Thick., mm	Flange OD, mm	Bolt Circle Dia., mm	OD, mm	Dynamic	Static	Temperature Range, ° F	For Shaft Material	No. of	Dia., mm		Each
440C Stainless Steel Bearings with Round Flanged Housing
40	80	96	96	13	96	78	60	485	900	-4° to 248°	Stainless Steel, Steel	4	9	0000000	0000000

Mounted Linear Bearings for Ball Splines

A flange with mounting holes makes it easy to attach a load to these bearings. Create a compact linear and rotary motion system for robots and other applications requiring complex, fast movements, by combining them with ball splines. These bearings move smoothly and precisely even at high speeds along ball splines while grooves on the ball spline transmit rotary power. Clip a retaining ring (not included) into the groove on these bearings to position them in your system.

Splines are alloy steel for high strength and wear resistance. They're hardened only on the outside, so they stand up to repeated motion while keeping their center soft enough to absorb stress from shifting loads. Those with a step-down end have a shoulder near the end to stop gears, sprockets, and bearings.

For technical drawings and 3-D models, click on a part number.

Steel Ball Bearings

For Four Splines

												Groove		Mounting Holes
For Spline Dia., mm	For No. of Splines	Overall Lg., mm	Flange OD, mm	Bolt Circle Dia., mm	OD, mm	Dynamic Load Capacity, lbs.	Static Load Capacity, lbs.	Max. Dynamic Torque, in.-lbs.	Max. Static Torque, in.-lbs.	Max. Temperature, ° F	With Retaining Ring Grooves	Wd., mm	Dia., mm	No. of	Thread Size		Each
37.4	4	100	90	72	60	6,900	8,400	5,637	7,806	176°	Yes	5	58.6	4	M8 × 1.25 mm	00000000	0000000

Steel Splines

Splined End × Step-Down End

Four Splines

					Step
Dia., mm	No. of Splines	Lg., mm	Spline Lg., mm	Root Dia., mm	Dia., mm	Lg., mm	Material		Each
Splined End × Step-Down End
37.4	4	550	400	33.1	30	150	52100 Alloy Steel	00000000	0000000

Flush-Mount Screw-Clamp Bushings

Insert these bushings into the bore of your sprocket for flush or recessed mounting. They handle shock loads. When you tighten the included clamping screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.

For technical drawings and 3-D models, click on a part number.

For Shaft Dia.	OD	Overall Wd.	Max. Torque, in.-lbs.	Fastener Tightening Torque, in.-lbs.	Material	Includes		Each
32mm	60mm	54mm	10,350	142	Steel	Clamping Screws	0000000	0000000
35mm	60mm	54mm	11,300	142	Steel	Clamping Screws	0000000	000000

Corrosion-Resistant Flush-Mount Screw-Clamp Bushings

Insert these nickel-plated steel bushings into the bore of your sprocket for flush or recessed mounting in wet environments. When you tighten the included clamping screws on these bushings, their inner sleeve contracts onto the shaft and their outer sleeve expands to hold your sprocket, pulley, or gear. This keeps bushings from slipping during sudden starts and stops.

For technical drawings and 3-D models, click on a part number.

For Shaft Dia., mm	OD, mm	Overall Wd., mm	Max. Torque, in.-lbs.	Fastener Tightening Torque, in.-lbs.	Material	Includes		Each
35	60	26	7,050	150	Nickel-Plated Steel	Clamping Screws	0000000	0000000

Email Us

About Ball and Roller Bearings

About Plain Bearings

About Linear Bearings

Thrust Ball Bearings

Needle-Roller Thrust Bearings

Washers for Needle-Roller Thrust Bearings

Cylindrical-Roller Thrust Bearings

Light Duty Dry-Running Sleeve Bearings

Multipurpose Sleeve Bearings with Groove

Oil-Embedded Thrust Bearings

Ultra-Low-Friction Oil-Embedded Thrust Bearings

High-Load Ultra-Low-Friction Oil-Embedded Thrust Bearings

High-Load Oil-Embedded Thrust Bearings

Food Industry Oil-Embedded Thrust Bearings

Light Duty Dry-Running Thrust Bearings

Corrosion-Resistant Thrust Bearings

Multipurpose Thrust Bearings

Linear and Rotary Ball Bearings

High-Temperature Linear Ball Bearings

Corrosion-Resistant Flange-Mounted Linear Ball Bearings

Mounted Linear Bearings for Ball Splines

Flush-Mount Screw-Clamp Bushings

Corrosion-Resistant Flush-Mount Screw-Clamp Bushings