Compare over 30 copper, brass, and bronze alloys to find the right material for you—all with material certificates for traceability.
About Plastic
More
932 Bearing Bronze Tubes
- Yield Strength: 18,000 psi
- Hardness: Rockwell B35 (Soft)
- Temper: M07
- Heat Treatable: No
- Specifications Met: ASTM B505
Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Oil-Filled 841 Bearing Bronze Tubes
- Yield Strength: 11,000 psi
- Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades. These tubes are oversized on the outside and undersized on the inside to allow for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
MDS-Filled Easy-to-Machine Wear-Resistant Cast Nylon Tubes
- Color: Black
- Maximum Temperature: 230° F
- Tensile Strength: 10,000 psi (Good)
- Impact Strength: 1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM D5989
The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes. Tubes can be used to fabricate pulleys, bushings, and bearings installed in hard-to-reach areas where adding a lubricant would be difficult. The OD is oversized and the ID is undersized to allow for finishing to the sizes listed. This material is comparable to Nylatron and Nycast.
For technical drawings and 3-D models, click on a part number.