McMaster-Carr logo
    Filter by
    System of Measurement
    OD
    Attribute Image
    Shaft Diameter
    Bearing Seal Type
    Material
    Lubrication
    Bearing Type
    Shaft Type
    Maximum Rotation Speed
    Shaft Mount Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Maximum Temperature
    Minimum Temperature
    Roller Material
    Rotation Speed
    Seal Material
    Static Combined Load Capacity
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Bearing Construction
    Lubricant
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    2 Products

    Thin-Profile Crossed-Roller Bearings

    Image of Product. Front orientation. Roller Bearings. Thin-Profile Crossed-Roller Bearings.
    For a more compact machine, these bearings have thinner inner and outer rings than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.
    Sealed Bearing—Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
    Combined Load
    Cap., lbf
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Wd.,
    mm
    Dynamic
    Static
    Max. Rotation
    Speed, rpm
    Lubrication
    Temp. Range,
    ° F
    Features
    Each
    For Combined Radial, Thrust, and Moment Load—Sealed with Steel Ring
    607681,2501,950500Lubricated0 to 175Lubrication Groove, Lubrication Hole1378N690000000
     

    Corrosion-Resistant Flanged Screw-Clamp Bushings

    Image of Product. Back orientation. Pulley and Sprocket Bushings. Corrosion-Resistant Flanged Screw-Clamp Bushings.
    Image of Attribute. Side1 orientation. Contains Annotated. Corrosion-Resistant Flanged Screw-Clamp Bushings.
    Made from stainless steel or plated with nickel, these bushings resist corrosion. A mounting flange prevents movement during tightening. As screw-clamp bushings, they're good for shock loads. When you tighten the clamping screws, the bushing's inner sleeve tightens onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.
    Nickel-Plated Steel—Nickel-plated steel bushings have good corrosion resistance in wet environments. However, the plating may begin to flake with long-term use.
    For Shaft
    Dia., mm
    OD,
    mm
    Overall
    Wd., mm
    Max. Torque,
    in·lbf
    Fastener Tightening
    Torque, in·lbf
    Includes
    Each
    Nickel-Plated Steel
    4076496,350120Clamping Screws5530N280000000
     
    back to top