We will reply to your message within an hour.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
The flange ensures proper positioning inside a tube or housing.
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.
Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.
Use where high loads and speeds are not required.
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Good for underwater applications, these bearings won’t swell or warp when wet.
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.
Also known as Oilite® bearings.
Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.
Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.
The choice for low-friction motion in high-temperature environments.
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.
Precisely align, level, and adjust spacing on fasteners and shafts with these shims.
Spin these shims onto screw threads to extend the shoulder length.
Place these shims under sharpened dies to restore their original height and extend their life.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.