About Shaft Collars
Shaft collars are useful for holding and positioning components on a shaft. They can also serve as mechanical stops and stroke limiters.
More
About Ball and Roller Bearings
More
Ball Bearings
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6012-2Z | 60mm | 95mm | 18mm | Steel | 7,050 | 5,200 | 8,500 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6012-2RS | 60mm | 95mm | 18mm | Steel | 7,050 | 5,200 | 3,700 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000000 |
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
6012-2RS | 60mm | 95mm | 18mm | Steel | 5,100 | 4,400 | 3,700 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 0000000 |
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6012-2Z | 60 | 95 | 18 | Steel | 6,900 | 5,200 | 7,500 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 0000000 |
Sealed | ||||||||||||
6012-2RS | 60 | 95 | 18 | Steel | 6,900 | 5,200 | 4,500 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 000000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6012-2RS | 60mm | 95mm | 18mm | 440C Stainless Steel | 6,600 | 5,200 | 4,000 | Lubricated | -20° to 210° | ABEC-1 | 00000000 | 0000000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Shielded | ||||||||||||||
75mm | 95mm | 10mm | 2,800 | 2,900 | Not Rated | Not Rated | Not Rated | Not Rated | 12,500 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 0000000 |
High-Speed Angular-Contact Thrust Ball Bearings
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Sealed bearings block out dust and other contaminants better than open bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Single Row | |||||||||||||
Sealed | |||||||||||||
7012 | 60 | 95 | 18 | Steel | 8,300 | 6,850 | 14,900 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000000 |
Thrust Ball Bearings
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.
Bearings with steel cage and with bronze cage handle higher loads and speeds than bearings with a plastic cage.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | OD | Thick. | Cage Material | Washer Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Includes | Each | |
Open | ||||||||||||
70mm | 95mm | 18mm | Steel | Steel | 9,600 | 28,500 | 3,400 | Required | -40° to 250° | Two Washers | 00000000 | 0000000 |
Tapered-Roller Bearings
Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Bearing Trade Number | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
60mm | 95mm | 17.5mm | 32012 | 5,600 | 29,500 | 4,100 | 37,000 | 1,800 | Required | -60° to 200° | 0000000 | 000000 |
High-Load Face-Mount Crossed-Roller Bearings
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Features | Each | |
Open | |||||||||||
35 | 95 | 15 | Steel | 3,850 | 4,650 | 1,100 | Required | 0° to 230° | Lubrication Groove, Two Lubrication Holes | 0000000 | 0000000 |
Sealed | |||||||||||
35 | 95 | 15 | Steel | 3,850 | 4,650 | 900 | Lubricated | 0° to 210° | Lubrication Groove, Two Lubrication Holes | 0000000 | 000000 |
Needle-Roller Thrust Bearings
Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microns | Temp. Range, °F | Specifications Met | Each | |
Steel Rollers | |||||||||||
Open | |||||||||||
70mm | 95mm | 4mm | 12,100 | 57,000 | 3,500 | Required | 0.2 | 0° to 240° | DIN 5405-2 | 000000 | 000000 |
Washers for Needle-Roller Thrust Bearings
Cylindrical-Roller Thrust Bearings
Cylindrical-roller thrust bearings handle higher loads than needle-roller thrust bearings. They also run at faster speeds than tapered-roller thrust bearings.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | OD, mm | Thick., mm | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Includes | Each | |
Steel Rollers | ||||||||||
Open | ||||||||||
70 | 95 | 18 | 24,950 | 82,050 | 3,500 | Required | -25° to 245° | Two Washers | 0000000 | 0000000 |
Bearing Retaining Nuts
Often paired with spring lock washers to strengthen their hold, these retaining nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle. They have slotted sides, so you can tighten and loosen them with a spanner wrench or spanner socket.
Use stepped-face retaining nuts with DIN 462 spring lock washers. You can also use them in pairs or with other bearing retaining nuts as jam nuts. For the nut closer to the bearing, position the stepped face towards the bearing. All meet DIN standards for bearing lockout dimensions.
Carbon steel retaining nuts are strong and resist wear.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Spacing | OD | Wd., mm | Specifications Met | For Lock Washer Specifications Met | Each | |
Carbon Steel | ||||||||
Stepped Face | ||||||||
M65 | 1.5 | Extra Fine | 95mm | 14 | DIN 1804 | DIN 462 | 0000000 | 000000 |
Bearing Retaining Jam Nuts
Used in pairs or with another bearing retaining nut, these jam nuts—often called shaft nuts—hold bearings, bushings, pulleys, and gears in place on your threaded shaft or spindle. Threading two nuts tightly against each other makes it harder for vibration to loosen your assembly than if you used only one nut. For the nut closer to the bearing, position the stepped face towards the bearing. These jam nuts have holes on the side, so you can tighten and loosen them with a pin spanner wrench. Made of carbon steel, they’re strong and wear resistant. All meet DIN 1816, an international standard for bearing locknut dimensions.
For technical drawings and 3-D models, click on a part number.