We will reply to your message within an hour.
More
These steel ball bearings handle higher loads than stainless steel and plastic bearings.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.
Use these bearings where high speed and precision are not required.
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.
For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.
With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.
Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.
These PEEK bearings operate in temperatures almost twice as high as our other plastic ball bearings.
The flange ensures proper positioning inside a tube or housing.
Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.
Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.
No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.
When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings.
Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels.
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
These bearings have twice as many contact points as angular-contact ball bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.
Use where high loads and speeds are not required.
Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts.
With a considerably larger ID than our Face-Mount Crossed-Roller Bearings, use these to run hydraulic lines, electrical wiring, and other components through the inside of the bearing.
Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings.
A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle-roller bearing supports radial loads.
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.
These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.
Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.
With cylindrical rollers to distribute load over a large surface area, these bearings are often used to support heavy loads at high speeds in applications such as power generation and metal recycling.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.
These roller bearings handle extremely high speeds for their small size.
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.
Made of 440C stainless steel, these shaft-mount track rollers resist corrosion in damp environments.
The outer ring is built to handle higher speeds than standard shaft-mount track rollers.
These rollers are rated to handle radial and thrust (top and side) loads simultaneously.
Shaft-mount track rollers have more mounting flexibility than threaded track rollers.
A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.