McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    243 Products

    Low-Strength SAE Grade 2 Steel Square-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Square Neck.
    Image of Product. Back orientation. Elevator Bolts. Square Neck.
    About half the strength of medium-strength bolts, these steel bolts are good for light duty applications. They are commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. A square neck keeps these bolts from turning when tightening a nut. Zinc plating provides corrosion resistance in wet environments. Length is measured from the top of the head.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Wd.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut2592670A74000000
    1"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut2592670A7420000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut2592670A7440000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A7460000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A74800000
    2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A75000000
    2 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A75100000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut2592670A75200000
    2 3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut1092670A6350000
    3"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut1092670A8360000
    4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut592670A6600000
     
    5/16"-18
    3/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut2592670A7810000
    1"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut2592670A78300000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut2592670A78500000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut2592670A78700000
    1 3/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut2592670A78900000
    2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut2592670A79100000
    2 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut2592670A79200000
    2 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.22"70,000Nut2592670A79300000
    2 3/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut1092670A6370000
    3"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut1092670A8380000
    4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut592670A6610000
     
    3/8"-16
    1"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut1092670A8240000
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut1092670A8260000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut1092670A82800000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut1092670A6300000
    2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut1092670A63200000
    2 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut1092670A83400000
    3"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut1092670A84000000
    3 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut592670A66200000
    4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut592670A66300000
     
    1/2"-13
    1 1/2"Fully ThreadedCoarse
    1 9/16"5/32"0.5"0.28"70,000Nut192670A8610000
    2"Fully ThreadedCoarse
    1 9/16"5/32"0.5"0.28"70,000Nut192670A86500000
    2 1/2"Fully ThreadedCoarse
    1 9/16"5/32"0.5"0.28"70,000Nut192670A87300000
    3"Fully ThreadedCoarse
    1 9/16"5/32"0.5"0.28"70,000Nut192670A88200000
     
    M6 × 1 mm
    20 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut2593226A11000000
    25 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut2593226A11500000
    30 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut2593226A12000000
    35 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm5.6 mm70,000Nut2593226A12500000
    40 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm5.6 mm70,000Nut2593226A13000000
     
    M8 × 1.25 mm
    20 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut2593226A23000000
    25 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut2593226A23500000
    30 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut2593226A24000000
    35 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut2593226A24500000
    40 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut2593226A25000000
    45 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut1093226A2550000
    50 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut1093226A2600000
     
    M10 × 1.5 mm
    25 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm5.7 mm70,000Nut1093226A35000000
    30 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm5.7 mm70,000Nut1093226A35500000
    35 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm5.7 mm70,000Nut1093226A36000000
    40 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm6.4 mm70,000Nut1093226A36500000
    45 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm6.4 mm70,000Nut1093226A37000000
    50 mmFully ThreadedCoarse
    33 mm3.7 mm9.83 mm6.4 mm70,000Nut1093226A37500000
     

    Low-Strength SAE Grade 2 Steel Fanged Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Fanged Bolt.
    Image of Product. Back orientation. Elevator Bolts. Fanged Bolt.
    Sharp teeth bite into the surface of wood, rubber belting, and other soft materials to keep the bolt from turning when tightening a nut. These bolts are commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. Length is measured from the top of the head.
    Zinc Plated—Zinc-plated steel bolts resist corrosion in wet environments.
    Head
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A12800000
    1"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1290000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1300000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1310000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1320000
    2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1330000
    2 1/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1340000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1350000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A1360000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A1370000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A1380000
    1 3/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1390000
    2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1400000
    2 1/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1410000
    2 1/2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1420000
     
    3/8"-16
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1430000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1440000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1450000
    2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1460000
    2 1/2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1480000
     
    Zinc-Plated Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut2592221A24000000
    1"Fully ThreadedCoarse
    31/32"3/32"70,000Nut2592221A24200000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut2592221A24400000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut2592221A24600000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1010000
    2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1020000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"70,000Nut1092221A1040000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A2830000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A2850000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A2870000
    1 3/4"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1060000
    2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut1092221A29100000
    2 1/2"Fully ThreadedCoarse
    1 3/16"7/64"70,000Nut592221A1080000
     
    3/8"-16
    1"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1090000
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut1092221A32600000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut1092221A32800000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut1092221A33000000
    2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut1092221A33200000
    2 1/2"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut592221A1110000
    3"Fully ThreadedCoarse
    1 5/16"9/64"70,000Nut192221A1130000
     
    M6 × 1 mm
    25 mmFully ThreadedFine
    25 mm2.4 mm70,000Nut1092221A1140000
    30 mmFully ThreadedFine
    25 mm2.4 mm70,000Nut1092221A1150000
    35 mmFully ThreadedFine
    25 mm2.4 mm70,000Nut1092221A1160000
     
    M8 × 1.25 mm
    25 mmFully ThreadedCoarse
    30 mm2.6 mm70,000Nut592221A1180000
    35 mmFully ThreadedCoarse
    30 mm2.6 mm70,000Nut592221A1200000
    40 mmFully ThreadedCoarse
    30 mm2.6 mm70,000Nut592221A1210000
     
    M10 × 1.5 mm
    30 mmFully ThreadedCoarse
    33 mm3.5 mm70,000Nut592221A1240000
     

    Low-Strength SAE Grade 2 Steel Ribbed-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Ribbed Neck.
    Image of Product. Back orientation. Elevator Bolts. Ribbed Neck.
    Ribs under the head dig into the surface of soft metal and plastic to keep the bolt from turning when tightening a nut. These bolts are commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. Length is measured from the top of the head.
    Black Oxide—Black-oxide steel bolts are mildly corrosion resistant in dry environments.
    Zinc Plated—Zinc-plated steel bolts resist corrosion in wet environments.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Dia.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    Black Oxide Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2590432A11000000
    1"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2590432A1200000
    1 1/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2590432A1300000
    1 1/2"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2590432A1400000
     
    5/16"-18
    1"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut2590432A15000000
    1 1/4"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut1090432A1600000
    1 1/2"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut1090432A1700000
     
    Zinc-Plated Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2591488A2400000
    1"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2591488A24200000
    1 1/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2591488A24400000
    1 1/2"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"70,000Nut2591488A24600000
     
    5/16"-18
    1"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut2591488A36300000
    1 1/4"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut1091488A3650000
    1 1/2"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"70,000Nut1091488A3680000
     

    Medium-Strength SAE Grade 5 Steel Square-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Medium-Strength SAE Grade 5, Square Neck.
    Image of Product. Back orientation. Elevator Bolts. Medium-Strength SAE Grade 5, Square Neck.
    Made from Grade 5 steel, these bolts are suitable for fastening most machinery and equipment. They have a smooth, low-profile head that provides a flush fit when installed. They're commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, but can also be used in leveling and work-holding applications. A square neck keeps these bolts from turning when tightening a nut. They are zinc yellow-chromate plated to resist corrosion in wet environments. Grade 5 steel bolts are marked with three radial lines. Length is measured from the top of the head.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Wd.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"120,000Nut1094650A410000000
    1"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"120,000Nut1094650A41100000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"120,000Nut1094650A41200000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut1094650A41300000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut594650A4140000
    2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut594650A4150000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut594650A41600000
    3"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"120,000Nut594650A41700000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"120,000Nut1094650A41800000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"120,000Nut594650A4190000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"120,000Nut594650A4200000
    2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"120,000Nut594650A42100000
    2 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"120,000Nut594650A42200000
    3"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"120,000Nut194650A4230000
     
    3/8"-16
    1"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"120,000Nut194650A4240000
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"120,000Nut194650A4250000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"120,000Nut194650A4260000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4270000
    2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4280000
    2 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4290000
    3"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4300000
    3 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4310000
    4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"120,000Nut194650A4320000
     

    Weld Studs

    Image of Product. Front orientation. Studs. Weld Studs.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Below-Head Projection.
    Image of Specification. Back orientation. ZoomedIn view. Contains Border. Above-Head Projection.

    Below-Head

    Projection

    Above-Head

    Projection

    Weld in place for greater rigidity and strength than other studs. These studs have a wide base that distributes the load and projections that concentrate the weld. Length listed is overall length.
    Steel—Without a finish, these studs require minimal prep work before welding. After installation, you can paint them for a finished look.
    Below-Head Projection—Choose these studs for a strong hold that uses the full strength of the fastener. Pass through a hole and weld them in place.
    Above-Head Projection—Weld the head directly to the surface of the material for a smooth appearance.
    Base
    Lg.
    Projection
    Location
    Dia.
    Thk.
    Tensile Strength,
    psi
    Hardness
    Pkg.
    Qty.
    Pkg.
    Steel
     
    6-32
    1/2"Below Head0.323"0.052"60,000Not Rated10093865A31000000
    5/8"Below Head0.323"0.052"60,000Not Rated10093865A1200000
    3/4"Below Head0.323"0.052"60,000Not Rated10093865A3200000
     
    8-32
    3/8"Below Head0.385"0.068"60,000Not Rated10093865A1350000
    3/8"Above Head0.323"0.052"60,000Not Rated10093865A5500000
    1/2"Below Head0.385"0.068"60,000Not Rated10093865A3300000
    3/4"Below Head0.385"0.068"60,000Not Rated10093865A3400000
    1"Below Head0.385"0.068"60,000Not Rated10093865A1550000
     
    10-24
    3/8"Below Head0.448"0.068"60,000Not Rated10093865A1600000
    3/8"Above Head0.385"0.068"60,000Not Rated10093865A5600000
    1/2"Below Head0.448"0.068"60,000Not Rated10093865A1650000
    1/2"Above Head0.385"0.068"60,000Not Rated10093865A5700000
    5/8"Below Head0.448"0.068"60,000Not Rated10093865A17000000
    3/4"Below Head0.448"0.068"60,000Not Rated10093865A17500000
    3/4"Above Head0.385"0.068"60,000Not Rated10093865A58000000
    1"Below Head0.448"0.068"60,000Not Rated10093865A35000000
    1 1/4"Below Head0.448"0.068"60,000Not Rated10093865A36000000
     
    10-32
    3/8"Below Head0.448"0.068"60,000Not Rated10093865A3700000
    1/2"Below Head0.448"0.068"60,000Not Rated10093865A1900000
    1/2"Above Head0.385"0.068"60,000Not Rated10093865A5900000
    5/8"Below Head0.448"0.068"60,000Not Rated10093865A1950000
    5/8"Above Head0.385"0.068"60,000Not Rated10093865A61000000
    3/4"Below Head0.448"0.068"60,000Not Rated10093865A38000000
    3/4"Above Head0.385"0.068"60,000Not Rated10093865A62000000
    1"Below Head0.448"0.068"Not RatedNot Rated5093865A2050000
    1"Above Head0.385"0.068"60,000Not Rated10093865A63000000
     
    1/4"-20
    3/8"Below Head0.575"0.083"Not RatedNot Rated5093865A2150000
    3/8"Above Head0.51"0.083"60,000Not Rated5093865A6400000
    1/2"Below Head0.575"0.083"Not RatedNot Rated5093865A2200000
    1/2"Above Head0.51"0.083"60,000Not Rated5093865A6500000
    5/8"Below Head0.575"0.083"Not RatedNot Rated5093865A2250000
    5/8"Above Head0.51"0.083"60,000Not Rated5093865A6600000
    3/4"Below Head0.575"0.083"Not RatedNot Rated5093865A23000000
    3/4"Above Head0.51"0.083"60,000Not Rated5093865A6700000
    7/8"Below Head0.575"0.083"60,000Not Rated2593865A39000000
    1"Below Head0.575"0.083"Not RatedNot Rated5093865A23500000
    1"Above Head0.51"0.083"60,000Not Rated5093865A68000000
    1 1/4"Below Head0.575"0.083"60,000Not Rated2593865A4100000
    1 1/2"Below Head0.575"0.083"60,000Not Rated2593865A4200000
    1 3/4"Below Head0.575"0.083"60,000Not Rated2593865A4300000
    2"Below Head0.575"0.083"60,000Not Rated2593865A44000000
     
    5/16"-18
    3/4"Below Head0.755"0.099"60,000Not Rated2593865A45000000
    3/4"Above Head0.63"0.099"60,000Not Rated593865A6900000
    1"Below Head0.755"0.099"60,000Not Rated593865A4600000
    1 1/4"Below Head0.755"0.099"60,000Not Rated2593865A47000000
    2"Below Head0.755"0.099"60,000Not Rated593865A48000000
     
    3/8"-16
    1"Below Head0.88"0.114"60,000Not Rated1093865A4900000
    1 1/4"Below Head0.88"0.114"60,000Not Rated593865A5100000
    1 1/2"Below Head0.88"0.114"60,000Not Rated1093865A5200000
    1 3/4"Below Head0.88"0.114"60,000Not Rated1093865A5300000
     
    1/2"-13
    1 1/4"Below Head1.005"0.146"60,000Not Rated593865A54000000
     
    M3.5
    8 mmAbove Head7 mm1.1 mmNot RatedNot Rated1093865A7100000
    25 mmAbove Head7 mm1.1 mmNot RatedNot Rated1093865A7400000
     
    M4
    6 mmAbove Head8 mm1.2 mmNot RatedNot Rated1093865A7500000
    8 mmAbove Head8 mm1.2 mmNot RatedNot Rated1093865A7600000
    10 mmAbove Head8 mm1.2 mmNot RatedNot Rated1093865A7700000
     

    Stainless Steel Ribbed-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Ribbed Neck.
    Image of Product. Back orientation. Elevator Bolts. Ribbed Neck.
    Ribs under the head dig into the surface of soft metal and plastic to keep the bolt from turning when tightening a nut. These bolts are commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. 18-8 stainless steel bolts have good chemical resistance and may be mildly magnetic. Length is measured from the top of the head.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Dia.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"100,000Nut190433A11000000
    1"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"100,000Nut190433A1200000
    1 1/4"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"100,000Nut190433A1300000
    1 1/2"Fully ThreadedCoarse
    23/32"3/32"0.24"0.11"100,000Nut190433A1400000
     
    5/16"-18
    1"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"100,000Nut190433A1500000
    1 1/4"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"100,000Nut190433A1600000
    1 1/2"Fully ThreadedCoarse
    7/8"7/64"0.3"0.15"100,000Nut190433A1700000
     

    Stainless Steel Square-Neck Elevator Bolts

    Image of Product. Front orientation. Elevator Bolts. Square Neck.
    Image of Product. Back orientation. Elevator Bolts. Square Neck.
    Made from stainless steel, these chemical-resistant bolts have a square neck that keeps them from turning when tightening a nut. They're commonly used in tight spaces with moving parts, such as grain elevators and other belting systems, because the smooth, low-profile head provides a flush fit when installed. Length is measured from the top of the head.
    18-8 Stainless Steel—18-8 stainless steel bolts have good chemical resistance and may be mildly magnetic.
    316 Stainless Steel—316 stainless steel bolts are more corrosion resistant than 18-8 stainless steel bolts. They have excellent resistance to chemicals and salt water.
    Head
    Neck
    Lg.
    Threading
    Thread
    Spacing
    Dia.
    Ht.
    Wd.
    Lg.
    Tensile Strength,
    psi
    Includes
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut592361A450000000
    1"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut592361A45200000
    1 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut592361A45400000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut592361A45500000
    1 3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"70,000Nut192361A4110000
    2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut192361A4120000
    2 1/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut192361A4130000
    2 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut192361A4140000
    3"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"70,000Nut192361A4160000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut192361A4630000
    1 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"70,000Nut192361A4650000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut192361A4670000
    1 3/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut192361A4690000
    2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut192361A4710000
    2 1/4"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"70,000Nut192361A4180000
    3"Fully ThreadedCoarse
    1 3/16"7/64"0.39"0.22"70,000Nut192361A4220000
     
    3/8"-16
    1"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut192361A4230000
    1 1/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut192361A4260000
    1 1/2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut192361A4280000
    1 3/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"0.22"70,000Nut192361A4240000
    2"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut192361A4350000
    2 1/4"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut192361A42500000
    3"Fully ThreadedCoarse
    1 5/16"9/64"0.39"1/4"70,000Nut192361A47400000
     
    1/2"-13
    1 1/2"Fully ThreadedCoarse
    1 9/16"11/64"0.51"0.28"70,000Nut192361A43100000
    2"Fully ThreadedCoarse
    1 9/16"11/64"0.51"0.31"70,000Nut192361A43300000
    2 1/2"Fully ThreadedCoarse
    1 9/16"11/64"0.51"0.31"70,000Nut192361A43400000
    3"Fully ThreadedCoarse
    1 9/16"11/64"0.51"0.31"70,000Nut192361A47500000
     
    M6 × 1 mm
    20 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut192361A4530000
    30 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm4 mm70,000Nut192361A4780000
    40 mmFully ThreadedCoarse
    25 mm2.5 mm6.68 mm5.6 mm70,000Nut192361A4570000
     
    M8 × 1.25 mm
    20 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut192361A4580000
    25 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm4.8 mm70,000Nut192361A4590000
    35 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut192361A4620000
    50 mmFully ThreadedCoarse
    30 mm2.9 mm8.69 mm6.4 mm70,000Nut192361A4810000
     
    M10 × 1.5 mm
    35 mmFully ThreadedCoarse
    30 mm3.7 mm10.83 mm5.7 mm70,000Nut192361A46800000
    50 mmFully ThreadedCoarse
    30 mm3.7 mm10.83 mm6.4 mm70,000Nut192361A47200000
     
    316 Stainless Steel
     
    1/4"-20
    3/4"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"100,000Nut192361A4360000
    1"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"100,000Nut192361A4370000
    1 1/2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.16"100,000Nut192361A4390000
    2"Fully ThreadedCoarse
    31/32"3/32"0.26"0.22"100,000Nut192361A4420000
     
    5/16"-18
    1"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"100,000Nut192361A44300000
    1 1/2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"0.19"100,000Nut192361A44500000
    2"Fully ThreadedCoarse
    1 3/16"7/64"0.33"1/4"100,000Nut192361A44700000
     
    back to top