Bench-Mount Punches | McMaster-Carr

Filter by

For Use On

Material

Power Source

Throat Depth

Character Height

Character Type

Hole Diameter

Punching Force

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

For Maximum Surface Hardness

Rockwell C30

Rockwell C50

Number of Mounting Holes

Performance

Sold As

For Maximum Steel Thickness

Component

Shank Width

Handle Length

Mounting Hole Diameter

Hardness

Manufacturer Equivalent Number

Shank Length

Shank Thickness

220 Products

Bench-Mount Manual Presses for Fabric Snaps

Install standard and dual-sided fabric snaps with one push of the handle. Standard snap halves require a 4-piece die set (sold separately) for installation. Dual-sided snap halves require a die (sold separately) for installation.

				Ram			Mounting Holes
For Snap Dia.	Throat Dp.	Press Ht.	Frame Material	Shape	Dia.	Material	No. of	Dia.	Mounting Fasteners Included		Each



	9/16"	4 3/4"	8"	Iron	Round	3/8"	Steel	3	0.27"	No	95715A690	0000000

Accessories for Fabric Fastener Installation Tools

	For Snap Dia.
Dual-Sided Fabric Snap Half Dies


9/16"	95715A360	000000

	For Snap Dia.
4-Piece Grommet Die Sets


9/16"	95715A692	0000000

Long-Reach Bench-Mount Lever-Operated Hole Punches

A throat depth more than double those of standard bench-mount lever-operated punches allows this tool to reach further past the edge of material. It is often used to make holes in signs for fasteners. The included punch and die are replaceable.

Note: As your punch size increases, the thickness of steel this tool can cut decreases.

												Mounting Hole
	Mfr. Equiv. No.	For Hole Dia.	For Max. Steel Thk.	Punching Force, lbf	Throat Dp.	Handle Lg.	Ht.	Wd.	Dp.	Material	Fasteners Included	No. of	Lg.	Wd.	Includes		Each
For Aluminum, Brass, Copper, Fiberglass, Iron, Plastic, Stainless Steel, Steel







				Round

				6	1/4"	1/8"	10,000	8"	29"	11"	4 1/4"	13"	Cast Iron	No	4	7/8"	9/16"	Punch, Die	3450A11	0000000

Punch and Die Sets

			For Hole
	For Mfr. Equiv. No.	Material	Dia.	Lg.	Wd.		Each
For Aluminum, Brass, Copper, Fiberglass, Iron, Plastic, Stainless Steel, Steel



		6	Cast Iron	1/16"	—	—	3450A26	000000


		6	Cast Iron	3/32"	—	—	3450A27	00000
		6	Cast Iron	1/8"	—	—	3450A12	00000
		6	Cast Iron	5/32"	—	—	3450A13	00000
		6	Cast Iron	3/16"	—	—	3450A14	00000
		6	Cast Iron	7/32"	—	—	3450A15	00000
		6	Cast Iron	1/4"	—	—	3450A16	00000
		6	Cast Iron	9/32"	—	—	3450A17	00000
		6	Cast Iron	5/16"	—	—	3450A18	00000
		6	Cast Iron	11/32"	—	—	3450A19	00000
		6	Cast Iron	3/8"	—	—	3450A21	00000


		6	Cast Iron	13/32"	—	—	3450A22	00000
		6	Cast Iron	7/16"	—	—	3450A23	00000
		6	Cast Iron	15/32"	—	—	3450A24	00000
		6	Cast Iron	1/2"	—	—	3450A25	00000
		6	Cast Iron	—	1/8"	1/8"	3450A31	000000
		6	Cast Iron	—	3/16"	3/16"	3450A32	000000
		6	Cast Iron	—	1/4"	1/4"	3450A33	000000
		6	Cast Iron	—	5/16"	5/16"	3450A34	000000
		6	Cast Iron	—	3/8"	3/8"	3450A35	000000
		6	Cast Iron	—	7/16"	7/16"	3450A36	000000


		6	Cast Iron	—	1/2"	1/2"	3450A37	000000

Smooth-Operating Bench-Mount Lever-Operated Hole Punches

Roller bearings in the lever provide low-effort punching. Secure this punch to your workbench and use the lever handle to punch through tough materials. The included punch and die are replaceable. Punch includes adjustable die holders for punching light-gauge metal.

Note: As your punch size increases, the thickness of steel this tool can cut decreases.

												Mounting Hole
	Mfr. Equiv. No.	For Hole Dia.	For Max. Steel Thk.	Punching Force, lbf	Throat Dp.	Handle Lg.	Ht.	Wd.	Dp.	Material	Fasteners Included	No. of	Dia.	Includes		Each
For Aluminum, Brass, Copper, Iron, Steel







				Round

				16	9/32"	7/32"	14,000	3 1/4"	24 1/2"	9 3/4"	4"	8 1/2"	Cast Iron	No	3	7/16"	Punch, Die, Adjustable Die Holders	3441A18	0000000

Punch and Die Sets

	Material	Choose a Hole Diameter		Each
For Aluminum, Brass, Copper, Iron, Steel



	16	Cast Iron	1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2", 33/64", 17/32", 35/64", 9/16"	3441A41	000000

Heavy Duty Long-Reach Bench-Mount Lever-Operated Hole Punches

Use twice the punching force of standard long-reach punches to make holes in structural steel channels and angle iron. The included punch and die are replaceable. A die holder is required (sold separately).

Note: As your punch size increases, the thickness of steel this tool can cut decreases.

					For Angle Iron										Mounting Hole
	Mfr. Equiv. No.	For Hole Dia.	For Max. Steel Thk.	For Channel Ht.	Leg Lg.	Wall Thk.	Punching Force, lbf	Throat Dp.	Handle Lg.	Ht.	Wd.	Dp.	Material	Fasteners Included	No. of	Dia.		Each
For Aluminum, Brass, Copper, Fiberglass, Iron, Plastic, Stainless Steel, Steel







				Round

				92	1/2"	1/4"	2 1/2"	2 1/2"	1/4"	20,000	10"	22"	16 3/4"	7 3/4"	20"	Steel	No	4	1/2"	3443A112	000000000

Accessories for Hole Punches

Punch and Die Sets

	Material	Choose a Hole Diameter		Each
For Aluminum, Brass, Copper, Fiberglass, Iron, Plastic, Stainless Steel, Steel



	92	Steel	1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16"	3443A81	0000000


	92	Steel	19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8"	3443A82	000000

Die Holders

For Mfr. Equiv. No.	Material	For Die Hole Dia.		Each
92	Steel	1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8"	3443A121	0000000
92	Steel	21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8"	3443A122	000000

High-Force Bench-Mount Lever-Operated Hole Punches

Our most powerful lever-operated punch, the rotary-action socket turns to deliver two to three times the punching force of other bench-mount lever-operated punches. Add your own lever handle to the rotary-action socket to customize the handle length. The included punch and die are replaceable. Additional punches (sold separately) require a compatible coupling nut (sold separately).

Note: As your punch size increases, the thickness of steel this tool can cut decreases.

													Mounting Hole
	Mfr. Equiv. No.	For Hole Dia.	For Max. Steel Thk.	Punching Force, lbf	Throat Dp.	For Handle Dia.	For Max. Handle Lg.	Ht.	Wd.	Dp.	Material	Fasteners Included	No. of	Lg.	Wd.	Includes		Each
For Aluminum, Brass, Copper, Iron, Steel







				Round

				20	1/2"	1/2"	40,000	2 1/4"	1"	48"	11 1/2"	4"	7"	Cast Iron	No	2	11/16"	9/16"	Punch, Die, Coupling Nut	3442A12	0000000

Accessories for Hole Punches

Punch and Die Sets

	Material	Choose a Hole Diameter		Each
For Aluminum, Brass, Copper, Iron, Steel



	20	Cast Iron	1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2", 33/64", 17/32", 35/64", 9/16", 37/64", 19/32", 39/64", 5/8", 41/64", 21/32", 43/64", 11/16", 45/64", 23/32", 47/64", 3/4", 49/64", 25/32", 51/64", 13/16"	3442A41	000000

Hole Punch Coupling Nuts

For Mfr. Equiv. No.	Material	For Punch Hole Dia.		Each
20	Steel	1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2", 33/64", 17/32", 35/64", 9/16", 37/64", 19/32", 39/64", 5/8", 41/64", 21/32", 43/64", 11/16"	3442A62	000000
20	Steel	45/64", 23/32", 47/64", 3/4"	3442A63	00000
20	Steel	49/64", 25/32", 51/64", 13/16"	3442A64	00000

Sheet Metal Corner Punches

Combine the cutting base and a corner punch to make rounded corners in sheet metal.

Corner Punches

	For Max. Thick.
	Steel	Aluminum	Brass	Copper	Material	Choose a Curve Radius		Each
For Use On Aluminum, Brass, Copper, Plastic, Steel



		1/64"	1/32"	1/64"	1/64"	Aluminum	1/8", 3/16", 1/4", 5/16", 3/8", 1/2"	23805A92	0000000

Cutting Bases

Cutting Base shown with a

Corner Punch

Wd.	Ht.	Handle Lg.	Material		Each



8"	6"	2 1/2"	10"	Aluminum	23805A12	0000000

Fast-Cut Circular Gasket Cutters


Manual Bench Mount Cutters	Electric Bench Mount Cutters

Quickly turn out perfectly round gaskets. Designed for making batches of same-sized gaskets, these cutters rotate your material while they cut. Punch a hole in the center of your material, slip it onto the cutter, and hold it in place with the included nut. Use the built-in scale to set the blade to the exact diameter you need.

Manual Bench Mount Cutters

Manual cutters have a handle—turn it to cut and rotate your material.

Cutters																	Bolt Hole Locators		Dovetail Cutting Templates
	For Max. Thick.
Cutting Dia. Range	PTFE	Fiber	Rubber	Cork	Steel	Iron	Stainless Steel	Brass	Copper	400 Nickel	Tin	Zinc	Blade Material	Body Material		Each		Each		Each
3" to 28"	1/8"	3/16"	3/16"	1/4"	0.04"	0.04"	0.03"	0.04"	1/16"	0.03"	0.04"	0.04"	Steel	Cast Iron, Steel	3847A1	000000000	3870A105	000000	3870A106	000000

Accessories and Replacements for Gasket Cutters

		Each
28"-54" Cutting Diameter Extension Arm	3847A2	0000000
54"-80" Cutting Diameter Extension Arm	3847A3	000000
Replacement Spindle Assembly with Knurled Nut	3847A75	00000
Replacement Top and Bottom Cutting Wheels	3847A77	000000

Electric Bench Mount Cutters

Electric cutters automatically turn and cut your material when you flip a switch, so they’re easier to use than manual cutters.

Cutters										Bolt Hole Locators		Dovetail Cutting Templates
	For Max. Thick.
Cutting Dia. Range	PTFE	Fiber	Rubber	Cork	Blade Material	Body Material	Voltage, V AC		Each		Each		Each
2" to 62"	1/8"	3/16"	3/16"	3/16"	Steel	Cast Iron, Steel	120	8842N11	000000000	3870A105	000000	3870A106	000000

Replacement Cutting Wheels

		Each
Replacement Top and Bottom Cutting Wheels	3830A69	0000000

Bench-Mount Roller Chain Breakers

Push both chain pins out of your roller chain with the pull of a handle. These chain breakers make it easy to disassemble your chain to add or remove links. Since they mount to a work surface, they give you extra leverage and are convenient for frequent jobs.

						Base
	For Roller Chain Trade No.	For Roller Chain Pitch Range	Overall Ht.	Handle Lg.	Material	Lg.	Wd.	Mounting Hole Dia.		Each
For Single-Strand ANSI Roller Chain



		35, 40, 50, 60, 80, 100	3/8" to 1 1/4"	5 3/4"	28 1/2"	Steel	6"	7"	9/16"	5519N11	000000000

Dies

Pair chain breakers with a die that matches your roller chain trade size. Dies have two pockets that cup the bottom of a chain to quickly align it with these breakers.

	Material		Each
For Single Strand



	35	Steel	5519N12	0000000


	40	Steel	5519N13	000000
	50	Steel	5519N14	000000
	60	Steel	5519N15	000000
	80	Steel	5519N16	000000
	100	Steel	5519N17	000000

Punch Sets

24-Piece Set in Wood Stand

Sets contain everything you need for marking, loosening, and removing pins.

No. of Pieces	Includes	Material	Container Type		Each
24	Two 3/16" Point Dia. Center-Marking Punches (5" O'all Lg.) Two 5/16" Point Dia. Center-Marking Punches (6" O'all Lg.) Two 5/32" Point Dia. Fine-Center-Marking Punches (5" O'all Lg.) 1/4" Point Dia. Pin Loosening Punch (5" O'all Lg.) 1/4" Point Dia. Pin Removal Punch (5 3/4" O'all Lg.) 5/16" Point Dia. Pin Loosening Punch (6" O'all Lg.) 5/16" Point Dia. Pin Removal Punch (6" O'all Lg.) Two 1/8" Point Dia. Pin Loosening Punches (5" O'all Lg.) Two 1/8" Point Dia. Pin Removal Punches (4 3/4" O'all Lg.) Two 3/16" Point Dia. Pin Loosening Punches (5" O'all Lg.) Two 3/16" Point Dia. Pin Removal Punches (5 1/4" O'all Lg.) Two 3/32" Point Dia. Pin Removal Punches (4 1/2" O'all Lg.) Two 5/32" Point Dia. Pin Loosening Punches (5" O'all Lg.) Two 5/32" Point Dia. Pin Removal Punches (5" O'all Lg.)	Steel	Wood Stand	3482A21	0000000

Roller Chain Breaker/Riveters

In addition to breaking chain, this tool can also rivet chain to increase strength for better performance on high-speed drives. It can break ANSI numbers 50 and 60 roller chain and rivet ANSI number 50 chain. Attach the removable handle and clamp the breaker/riveter in a vise or bolt it to a workbench.

	Roller Chain Breaker/Riveters											Replacement Points
			Overall				Mounting Hole
	For Roller Chain Trade No.	For Roller Chain Pitch	Lg.	Wd.	Material	Mounting Fasteners Included	No. of	Thread Size	Includes		Each		Each
For Single-Strand ANSI Roller Chain



		50, 60	5/8" to 3/4"	6"	1 3/4"	Steel	No	2	3/8"-24	Press Plate, Removable Handle, Rivet Anvil, Steel Rivet Set	8186K11	0000000	8186K21	000000

Extra-Gentle-Mark Steel Stamp Sets

Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. The dotted, rounded faces on these stamps put the least amount of stress on surfaces when compared to other steel stamps, minimizing fractures that can weaken or damage metal.

		Shank
	Character Ht.	Lg.	Wd.	Thk.	For Max. Surface Hardness	Stamp Material	Includes		Each
Number Characters



		1/8"	2 3/4"	3/8"	3/8"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9); Compartmented Case	1551T22	000000


		1/2"	4"	3/4"	3/4"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9); Compartmented Case	1551T75	000000


		Letter Characters



				1/8"	2 3/4"	3/8"	3/8"	Rockwell C30	Steel	One each of A-Z and Ampersand (&); Compartmented Case	1551T23	000000


				1/2"	4"	3/4"	3/4"	Rockwell C30	Steel	One each of A-Z and Ampersand (&); Compartmented Case	1551T87	000000


				Letter-and-Number Characters



						1/8"	2 3/4"	3/8"	3/8"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9), A-Z, and Ampersand (&); Compartmented Case	1551T31	000000

Extra-Gentle-Mark Steel Stamp Sets for Hard Materials

Make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel. The dotted, rounded faces on these stamps put the least amount of stress on surfaces when compared to other steel stamps, minimizing fractures that can weaken or damage metal.

		Shank
	Character Ht.	Lg.	Wd.	Thk.	For Max. Surface Hardness	Stamp Material	Includes		Each
Number Characters



		3/16"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9); Compartmented Case	1551T71	000000


		1/4"	3"	7/16"	7/16"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9); Compartmented Case	1551T72	000000
		3/8"	3 1/8"	9/16"	9/16"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9); Compartmented Case	1551T74	000000


		Letter Characters



				3/16"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of A-Z and Ampersand (&); Compartmented Case	1551T83	000000


				1/4"	3"	7/16"	7/16"	Rockwell C50	Steel	One each of A-Z and Ampersand (&); Compartmented Case	1551T84	000000
				3/8"	3 1/8"	9/16"	9/16"	Rockwell C50	Steel	One each of A-Z and Ampersand (&); Compartmented Case	1551T86	000000


				Letter-and-Number Characters



						3/16"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9), A-Z, and Ampersand (&); Compartmented Case	1551T32	000000


						1/4"	3"	7/16"	7/16"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9), A-Z, and Ampersand (&); Compartmented Case	1551T33	000000
						3/8"	3 1/8"	9/16"	9/16"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9), A-Z, and Ampersand (&); Compartmented Case	1551T34	000000

Gentle-Mark Steel Stamp Sets

The rounded faces on these stamps put less stress on surfaces and minimize fractures that can weaken or damage metal. Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.

		Shank
	Character Ht.	Lg.	Wd.	Thk.	For Max. Surface Hardness	Stamp Material	Includes		Each
Number Characters



		1/16"	2 1/2"	5/16"	5/16"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	1634T11	000000


		3/32"	2 3/4"	5/16"	5/16"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	1634T12	00000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	1634T13	00000
		3/16"	2 3/4"	7/16"	7/16"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	1634T14	00000
		1/4"	3"	1/2"	1/2"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	1634T15	00000
		3/8"	3"	5/8"	5/8"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	1634T16	000000
		1/2"	4"	3/4"	3/4"	Rockwell C30	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	1634T17	000000


		Letter Characters



				1/16"	2 1/2"	5/16"	5/16"	Rockwell C30	Steel	One each of A-Z and Ampersand (&), Compartmented Case	1634T21	000000


				3/32"	2 3/4"	5/16"	5/16"	Rockwell C30	Steel	One each of A-Z and Ampersand (&), Compartmented Case	1634T22	000000
				1/8"	2 3/4"	3/8"	3/8"	Rockwell C30	Steel	One each of A-Z and Ampersand (&), Compartmented Case	1634T23	000000
				3/16"	2 3/4"	7/16"	7/16"	Rockwell C30	Steel	One each of A-Z and Ampersand (&), Compartmented Case	1634T24	000000
				1/4"	3"	1/2"	1/2"	Rockwell C30	Steel	One each of A-Z and Ampersand (&), Compartmented Case	1634T25	000000
				3/8"	3"	5/8"	5/8"	Rockwell C30	Steel	One each of A-Z and Ampersand (&), Compartmented Case	1634T26	000000
				1/2"	4"	3/4"	3/4"	Rockwell C30	Steel	One each of A-Z and Ampersand (&), Compartmented Case	1634T27	000000

Steel Stamp Sets for Hard Materials

These stamps are strong enough to make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

		Shank
	Character Ht.	Lg.	Wd.	Thk.	For Max. Surface Hardness	Stamp Material	Includes		Each
Number Characters



		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 00-09, Compartmented Case	8768T141	0000000


		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 10-19, Compartmented Case	8768T142	000000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 20-29, Compartmented Case	8768T143	000000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 30-39, Compartmented Case	8768T144	000000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 40-49, Compartmented Case	8768T145	000000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 50-59, Compartmented Case	8768T146	000000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 60-69, Compartmented Case	8768T147	000000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 70-79, Compartmented Case	8768T148	000000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 80-89, Compartmented Case	8768T149	000000
		1/8"	2 3/4"	3/8"	3/8"	Rockwell C50	Steel	One each of 90-99, Compartmented Case	8768T151	000000
		1/8"	3 1/2"	1/2"	1/2"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	8965T12	00000


		3/16"	3 1/2"	9/16"	9/16"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	8965T15	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 00-09, Compartmented Case	8768T171	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 10-19, Compartmented Case	8768T172	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 20-29, Compartmented Case	8768T173	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 30-39, Compartmented Case	8768T174	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 40-49, Compartmented Case	8768T175	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 50-59, Compartmented Case	8768T176	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 60-69, Compartmented Case	8768T177	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 70-79, Compartmented Case	8768T178	000000
		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 80-89, Compartmented Case	8768T179	000000


		1/4"	3"	9/16"	9/16"	Rockwell C50	Steel	One each of 90-99, Compartmented Case	8768T181	000000
		1/4"	3 1/2"	5/8"	5/8"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	8965T18	000000
		3/8"	3 1/2"	3/4"	3/4"	Rockwell C50	Steel	One each of 0-9 (6 doubles as 9), Compartmented Case	8965T11	000000


		Letter Characters



				1/8"	3 1/2"	1/2"	1/2"	Rockwell C50	Steel	One each of A-Z, Compartmented Case	8965T34	000000


				3/16"	3 1/2"	9/16"	9/16"	Rockwell C50	Steel	One each of A-Z, Compartmented Case	8965T37	000000
				1/4"	3 1/2"	5/8"	5/8"	Rockwell C50	Steel	One each of A-Z, Compartmented Case	8965T39	000000
				3/8"	3 1/2"	3/4"	3/4"	Rockwell C50	Steel	One each of A-Z, Compartmented Case	8965T33	000000