Combination Disc and Belt Sanders
Versatile enough to handle both detail work and heavy material removal, these are a disc and belt sander in one. The disc sander smooths edges, while the belt sander removes a lot of material on large surfaces. Adjustable belt tracking lets you maintain proper tension. Sanders with two voltages are wired for the lower voltage listed.
Dust-collecting sanders remove particles from the air and surface of the disc and belt to extend their life. They have a port that connects to a dust collector or vacuum system.
Sanders with a variable-speed motor let you set the speed for any task, so you can switch between materials or adjust for aggressive and fine sanding.
Sanders with a miter gauge make it easy to sand angles.
Sanders with a belt-release lever enable you to quickly swap out your belt.
Sanders with a detachable platen make it easy to sand contours.
For Adhesive-Back Disc | For Belt | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Dia. | Table Wd. | Table Lg. | Max. No-Load Speed, rpm | Wd. | Lg. | Orientation | Table Wd. | Table Lg. | Max. No-Load Speed, sfpm | Voltage | Current, A | Motor Speed, rpm | Features | Each | |
Variable Speed | ||||||||||||||||
Three-Prong Plug (Single Phase) with Miter Gauge | ||||||||||||||||
| 1 1/2 | 12" | 9" | 16" | 2,400 | 2" | 72" | Horizontal and Vertical | 2" | 6" | 6,250 | 120V AC 240V AC | 14 7 | 1,800 | Adjustable Belt Tracking, Belt Guard, Detachable Platen, Belt-Release Lever | 00000000 | 000000000 |
For Adhesive-Back Disc | For Belt | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Dia. | Table Wd. | Table Lg. | Max. No-Load Speed, rpm | Wd. | Lg. | Orientation | Table Wd. | Table Lg. | Max. No-Load Speed, sfpm | Voltage | Current, A | Motor Speed, rpm | Features | Each | |
One Speed | ||||||||||||||||
Three-Prong Plug (Single Phase) | ||||||||||||||||
| 1/2 | 10" | 6" | 11" | 1,725 | 4" | 36" | Horizontal and Vertical | 2 1/2" | 5" | 1,800 | 120V AC 240V AC | 7.4 3.7 | 1,725 | Adjustable Belt Tracking, Dust Extraction Port | 0000000 | 000000000 |
Three-Prong Plug (Single Phase) with One-Piece Steel Stand | ||||||||||||||||
| 3 | 12" | 8" | 14" | 2,500 | 6" | 48" | Horizontal and Vertical | 6" | 10" | 2,800 | 240V AC | 12 | 1,725 | Adjustable Belt Tracking, Dust Extraction Port, Belt Guard, Detachable Platen | 0000000 | 00000000 |
Hardwire Connection (Three Phase) with One-Piece Steel Stand | ||||||||||||||||
| 3 | 12" | 8" | 14" | 2,500 | 6" | 48" | Horizontal and Vertical | 6" | 10" | 2,800 | 240V AC | 8.4 | 1,725 | Adjustable Belt Tracking, Dust Extraction Port, Belt Guard, Detachable Platen | 0000000 | 00000000 |
Variable Speed | ||||||||||||||||
Three-Prong Plug (Single Phase) with Miter Gauge and One-Piece Steel Stand | ||||||||||||||||
| 2 | 14" | 7 1/4" | 15 1/2" | 1,775 | 6" | 48" | Any Angle and Horizontal and Vertical | 6" | 8 1/2" | 2,250 | 120V AC 240V AC | 12.5 6.2 | 1,720 | Adjustable Belt Tracking, Dust Extraction Port, Belt Guard, Detachable Platen | 00000000 | 00000000 |
Stationary Disc Sanders
Use with adhesive-back discs. Sanders with two voltages are wired for the lower voltage.
Sanders with lever control have a built-in dust fan with a hose that attaches to any standard shop vacuum.
Miter gauge enables angled sanding.
Table | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Disc Dia. | Wd. | Lg. | Max. No-Load Speed, rpm | No. of Speeds | Voltage | Current, A | Motor Type | Motor Speed, rpm | hp | Phase | Includes | Features | Each | |
Lever Control | ||||||||||||||
| 12" | 6 1/4" | 17 1/4" | 1,725 | One | 120V AC | 6 | Brushed | 1,725 | 1/2 | Single | __ | Built-In Dust Fan | 0000000 | 0000000 |
On/Off Switch Control | ||||||||||||||
| 10" | 6" | 11" | 1,725 | One | 120V AC/240V AC | 7.4/3.7 | Brushed | 1,725 | 1/2 | Single | Miter Gauge | Disc Guard | 0000000 | 000000 |
| 12" | 8" | 14" | 1,725 | One | 120V AC/240V AC | 12.8/6.4 | Brushed | 1,725 | 1 | Single | Miter Gauge | Disc Guard | 0000000 | 00000000 |
| Optional Miter Gauge for Lever-Control Sander | 0000000 | Each | 000000 |
Spindle Sanders
Sand curved, contoured, and complex surfaces, such as table legs or inside holes. The spindle on these sanders oscillates while it rotates so you can use the full abrasive surface of the sanding sleeve. This motion reduces the risk of burning your workpiece and helps the sleeve last longer. The table tilts down 45° to create beveled edges. Connect these sanders to a dust collector or vacuum system to clear away debris from your workspace and prevent your sander from clogging. These sanders are small enough to fit on your workbench.
They include different sizes of spindles and table inserts for a variety of jobs. The spindles are threaded on one end, so they're easy to change out. The table inserts install around the spindle to prevent dust and debris from falling into the motor. A built-in storage rack keeps the spindles and table inserts handy.
For Sleeve | Table | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | Lg. | Wd. | Lg. | Max. No-Load Speed, rpm | No. of Speeds | Voltage | Current, A | Motor Speed, rpm | hp | Phase | Includes | Features | Each | |
| 1/4", 1/2", 5/8", 1 1/2", 2" | 5 1/2", 6" | 14 1/2" | 14 1/2" | 1,725 | One | 120V AC | 7.5 | 1,720 | 1/2 | Single | One each Spindles for 1/4", 1/2", 5/8", 1 1/2", and 2" ID Sleeves One each 1/4" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 1/2" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 5/8" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 1 1/2" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 2" ID 100-grit Aluminum-Oxide Sanding Sleeves One each 3/4" and 2" Oblong Table Inserts One each 3/4" and 2" Round Table Inserts | Dust Extraction Port, Built-In Storage Racks | 0000000 | 0000000 |