Clear All
Anchor Type Anchor Type |
|---|
 | Hook |
Head Type Head Type |
|---|
 | |
System of Measurement System of Measurement |
|---|
|
Material Material |
|---|
|
Finish Finish |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
|
For Use In For Use In |
|---|
|
Thread Spacing Thread Spacing |
|---|
Thread Type Thread Type |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Thread Fit Thread Fit |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Removable Removable |
|---|
|
Pull-Out Strength Pull-Out Strength |
|---|
|
Shear Strength Shear Strength |
|---|
|
About Hex Head Screws and Bolts
More
Low-Strength Steel Hold-Down Bolts
Round
Flat
About half the strength of medium-strength bolts, these bolts are for light duty work-holding. They’re often used to hold batteries in place and have a hook on one end that grabs as the other end is tightened with a nut. The zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Hook | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Threading | Thread Lg. | Thread Spacing | Lg. | Thick. | Angle | Tensile Strength, psi | Includes | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel Bolts with Round Hooks | |||||||||||
1/4"-20 | |||||||||||
| 5" | Partially Threaded | 2 1/4" | Coarse | 3/4" | 1/4" | 60° | 60,000 | Nut, Washer | 2 | 000000000 | 000000 |
| 8" | Partially Threaded | 3 7/8" | Coarse | 3/4" | 1/4" | 90° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
| 9 1/4" | Partially Threaded | 2 3/4" | Coarse | 11/16" | 1/4" | 55° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
| 10" | Partially Threaded | 3 13/16" | Coarse | 3/4" | 1/4" | 90° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
| 10" | Partially Threaded | 3 13/16" | Coarse | 3/4" | 1/4" | 30° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
5/16"-18 | |||||||||||
| 6 3/4" | Partially Threaded | 2 1/4" | Coarse | 3/4" | 5/16" | 60° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
| 10 5/16" | Partially Threaded | 8" | Coarse | 9/16" | 5/16" | 60° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
Zinc-Plated Steel Bolts with Flat Hooks | |||||||||||
1/4"-20 | |||||||||||
| 4 3/4" | Partially Threaded | 2 3/4" | Coarse | 1/2" | 5/32" | 45° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
| 9" | Partially Threaded | 2 3/4" | Coarse | 1/2" | 5/32" | 45° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
5/16"-18 | |||||||||||
| 5 7/8" | Partially Threaded | 2 9/16" | Coarse | 5/16" | 5/32" | 20° | 60,000 | Nut, Washer | 1 | 000000000 | 00000 |
| 10 5/16" | Partially Threaded | 2 3/4" | Coarse | 1/2" | 5/32" | 45° | 60,000 | Nut, Washer | 2 | 000000000 | 00000 |
3/8"-16 | |||||||||||
| 10" | Partially Threaded | 2 3/4" | Coarse | 1/2" | 5/32" | 45° | 60,000 | Nut, Washer | 1 | 000000000 | 00000 |
Medium-Strength Steel Hold-Down Bolts
Made from steel comparable to Grade 5 steel, these bolts are suitable for most work-holding applications. They’re often used to hold sieve-shaker screens in place and have a hook on one end that grabs as the other end is tightened with a nut. Material meets SAE J429 specifications for quality.
For technical drawings and 3-D models, click on a part number.
Hook | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Threading | Thread Lg. | Thread Spacing | Lg. | Thick. | Angle | Tensile Strength, psi | Specifications Met | Each | |
Steel Bolts with Round Hook | ||||||||||
1/2"-13 | ||||||||||
| 4" | Partially Threaded | 2" | Coarse | 1 1/4" | 1/2" | 63° | 120,000 | SAE J429 | 000000000 | 00000 |
| 4 1/2" | Partially Threaded | 2" | Coarse | 1 1/4" | 1/2" | 63° | 120,000 | SAE J429 | 000000000 | 0000 |
| 5" | Partially Threaded | 3" | Coarse | 1 1/4" | 1/2" | 63° | 120,000 | SAE J429 | 000000000 | 0000 |
| 6" | Partially Threaded | 3" | Coarse | 1 1/4" | 1/2" | 63° | 120,000 | SAE J429 | 000000000 | 0000 |
| 7" | Partially Threaded | 3" | Coarse | 1 1/4" | 1/2" | 63° | 120,000 | SAE J429 | 000000000 | 0000 |
5/8"-11 | ||||||||||
| 5" | Partially Threaded | 3" | Coarse | 1 1/4" | 5/8" | 63° | 120,000 | SAE J429 | 000000000 | 0000 |
| 6" | Partially Threaded | 3" | Coarse | 1 1/4" | 5/8" | 63° | 120,000 | SAE J429 | 000000000 | 00000 |
| 7" | Partially Threaded | 3" | Coarse | 1 1/4" | 5/8" | 63° | 120,000 | SAE J429 | 000000000 | 00000 |
| 8" | Partially Threaded | 3" | Coarse | 1 1/4" | 5/8" | 63° | 120,000 | SAE J429 | 000000000 | 00000 |
Steel L-Hook Anchors for Wet Concrete
These steel L-hooks are designed for structural anchoring.
Hot-dipped galvanized steel anchors have a thick coating to resist corrosion in wet environments. They must be used with other hot-dipped galvanized fasteners.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Thread Size | Min. Thread Lg. | Hook Lg. | Tensile Strength, psi | Pull-Out | Shear | Specifications Met | Each | |
Steel | |||||||||
3/8" Dia. | |||||||||
| 8" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 10" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 24" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
1/2" Dia. | |||||||||
| 8" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 16" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 24" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
5/8" Dia. | |||||||||
| 8" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 24" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
3/4" Dia. | |||||||||
| 8" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
1" Dia. | |||||||||
| 10" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 12" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 14" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
Hot-Dipped Galvanized Steel | |||||||||
3/8" Dia. | |||||||||
| 8" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 24" | 3/8"-16 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
1/2" Dia. | |||||||||
| 8" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 16" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 1/2"-13 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
5/8" Dia. | |||||||||
| 8" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 16" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 5/8"-11 | 2 1/2" | 2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
3/4" Dia. | |||||||||
| 8" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 14" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 16" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 3/4"-10 | 3" | 2 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
1" Dia. | |||||||||
| 12" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 16" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 1"-8 | 4" | 3 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
Stainless Steel L-Hook Anchors for Wet Concrete
These 18-8 stainless steel anchors have good chemical resistance and may be mildly magnetic. They're designed for structural anchoring.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Thread Size | Min. Thread Lg. | Hook Lg. | Tensile Strength, psi | Pull-Out | Shear | Each | |
18-8 Stainless Steel | ||||||||
3/8" Dia. | ||||||||
| 8" | 3/8"-16 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 000000 |
| 10" | 3/8"-16 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 3/8"-16 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 14" | 3/8"-16 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
1/2" Dia. | ||||||||
| 8" | 1/2"-13 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 10" | 1/2"-13 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 1/2"-13 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 16" | 1/2"-13 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 18" | 1/2"-13 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
5/8" Dia. | ||||||||
| 8" | 5/8"-11 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 10" | 5/8"-11 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 5/8"-11 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 18" | 5/8"-11 | 2 1/2" | 2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
3/4" Dia. | ||||||||
| 8" | 3/4"-10 | 3" | 2 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 10" | 3/4"-10 | 3" | 2 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 3/4"-10 | 3" | 2 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 14" | 3/4"-10 | 3" | 2 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 18" | 3/4"-10 | 3" | 2 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 24" | 3/4"-10 | 3" | 2 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
1" Dia. | ||||||||
| 10" | 1"-8 | 4" | 3 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 1"-8 | 4" | 3 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 18" | 1"-8 | 4" | 3 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 24" | 1"-8 | 4" | 3 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
Stainless Steel J-Hook Anchors for Wet Concrete
These 18-8 stainless steel anchors have good chemical resistance and may be mildly magnetic. They're designed for structural anchoring.
For technical drawings and 3-D models, click on a part number.
Hook | Strength, lbs. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Thread Size | Min. Thread Lg. | Lg. | Opening | Tensile Strength, psi | Pull-Out | Shear | Each | |
18-8 Stainless Steel | |||||||||
3/8" Dia. | |||||||||
| 8" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 80,000 | Not Rated | Not Rated | 000000000 | 000000 |
| 10" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 14" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
1/2" Dia. | |||||||||
| 8" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 10" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 16" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 18" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
5/8" Dia. | |||||||||
| 8" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 10" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
3/4" Dia. | |||||||||
| 8" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 10" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 14" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 18" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 24" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
1" Dia. | |||||||||
| 10" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 12" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 18" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
| 24" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 80,000 | Not Rated | Not Rated | 000000000 | 00000 |
Steel J-Hook Anchors for Wet Concrete
These steel J-hooks are designed for structural anchoring.
Hot-dipped galvanized steel anchors have a thick coating to resist corrosion in wet environments. They must be used with other hot-dipped galvanized fasteners.
For technical drawings and 3-D models, click on a part number.
Hook | Strength, lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Thread Size | Min. Thread Lg. | Lg. | Opening | Tensile Strength, psi | Pull-Out | Shear | Specifications Met | Each | |
Steel | ||||||||||
3/8" Dia. | ||||||||||
| 8" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 10" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
1/2" Dia. | ||||||||||
| 8" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 16" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
5/8" Dia. | ||||||||||
| 8" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
3/4" Dia. | ||||||||||
| 8" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
1" Dia. | ||||||||||
| 10" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 12" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
Hot-Dipped Galvanized Steel | ||||||||||
3/8" Dia. | ||||||||||
| 8" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 14" | 3/8"-16 | 2 1/2" | 1" | 1/2" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
1/2" Dia. | ||||||||||
| 8" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 12" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 16" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 18" | 1/2"-13 | 2 1/2" | 1 1/4" | 5/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
5/8" Dia. | ||||||||||
| 8" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 10" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 12" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 5/8"-11 | 2 1/2" | 1 1/4" | 3/4" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
3/4" Dia. | ||||||||||
| 8" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 0000 |
| 10" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 12" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 14" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 3/4"-10 | 3" | 1 1/2" | 1 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
1" Dia. | ||||||||||
| 10" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 12" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 18" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |
| 24" | 1"-8 | 4" | 3 1/4" | 2 1/8" | 58,000 | Not Rated | Not Rated | ASTM A36 | 000000000 | 00000 |