We will reply to your message within an hour.
More
Bend one tab against the side of the mounting surface and the other tab against the flats on a bolt or nut to prevent both the fastener and washer from turning and loosening in high-vibration applications, such as a motor mount.
Bend the tab on these metric lock washers to prevent the fastener and washer from turning and loosening due to vibration.
Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.
To keep 90° countersunk screws from loosening in vibration applications, the teeth on these washers bite further into the screw head and joint than standard external-tooth lock washers for a more secure hold.
The teeth on these washers firmly grip heads of 82° flat head countersunk screws.
Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.
Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.
Choose these washers for their adherence to strict military standards for material and construction.
The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.
Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.
Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.
Slightly domed with an oversized outside diameter, these washers distribute your fastener's load over a larger surface area than other internal-tooth lock washers to limit damage to soft material.
The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.
Use on clamps with open arms to keep the holding screw in place.
Use the angled edges to hold and align tie-down straps.
Repair sagging, cracked plaster with these washers. The holes allow plaster to flow through to form a secure bond between the washer and the wall.
These washers have prongs that pierce foam insulation so they stay in place.
Teeth bite into the joint for a tighter grip than split lock washers.