Beryllium Copper Wrenches

Filter by

Material

Insert Material

System of Measurement

Overall Length

Drive Size

Drive Style

Performance

Wrench Style

Square Drive Size

Unit of Measure

Sold As

Head Style

Tip Style

Torque

22 ft·lbf to 110 ft·lbf

Length

Driver Style

Jaw Style

Maximum Torque

Less than 1,000 ft·lbf

100 N-m to 249 N-m

Ratcheting

Nonratcheting

Ratcheting

Torque-Limiting Direction

Clockwise and Counterclockwise

Maximum Jaw Capacity

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

Not Compliant

DFARS Specialty Metals

RoHS

62 Products

Nonsparking Torque Wrenches

These wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Set the desired torque and the wrench indicates when it's reached with an audible click. To relieve pressure on the spring and maintain calibration, set torque to the lowest reading on the scale when not in use.

Torque—You can tighten fasteners that require less torque than the values listed, but the accuracy ratings apply only within the specified range.

				Accuracy
	Square Drive Size	Torque	Graduations	Clockwise	Counterclockwise	Torque-Limiting Mechanism	Overall Lg.	Material	Grip Material	Certification		Each
Ratcheting







				ft·lbf, N-m

				1/2"	22 ft·lbf to 110 ft·lbf 16 N-m to 150 N-m	0.1 ft·lbf 0.1 N-m	±4%	±4%	Click	20 1/2"	Beryllium Copper	Plastic	BAM Certified	2826N51	000000000

Nonsparking Pipe Wrenches

Made of materials that are Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Warning: Do not use these tools in direct contact with acetylene.

	Wrenches										Replacement Jaw Inserts
		Jaw					Aluminum		Aluminum Bronze
	Overall Lg.	Max. Cap.	Material	Texture	Insert Material	Certification		Each		Each		Each
Straight Jaw



		8"	1 15/16"	Aluminum Bronze	Serrated	Beryllium Copper	FM Approved	———	0	6498A1	0000000	6461A61	000000


		10"	2 1/2"	Aluminum Bronze	Serrated	Beryllium Copper	FM Approved	6461A21	0000000	6498A2	000000	6461A62	00000
		14"	2 13/16"	Aluminum Bronze	Serrated	Beryllium Copper	FM Approved	6461A22	000000	6498A3	000000	6461A63	00000
		18"	3 3/16"	Aluminum Bronze	Serrated	Beryllium Copper	FM Approved	6461A23	000000	6498A4	000000	6461A64	00000
		24"	4 1/4"	Aluminum Bronze	Serrated	Beryllium Copper	FM Approved	6461A24	000000	6498A5	000000	6461A65	00000
		36"	5 11/16"	Aluminum Bronze	Serrated	Beryllium Copper	FM Approved	6461A25	000000	6498A6	000000	6461A66	00000

Nonsparking L-Keys

Made of beryllium copper that is Factory Mutual (FM) approved, these L-keys won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.

Warning: Do not use these tools in direct contact with acetylene.

Short—A short long leg fits into tight spaces where you have less room to swing, making these ideal for confined areas.

		Length
	Drive Size	Overall	Relative	Long Leg	Short Leg	Finish	Certification	Specs. Met		Each
Beryllium Copper







				Hex

				1/16"	1 13/16"	Short	1 3/4"	1/2"	__	FM Approved	—	6522A11	00000


				5/64"	2"	Short	1 7/8"	3/4"	__	FM Approved	—	6522A12	0000
				3/32"	2"	Short	1 7/8"	3/4"	__	FM Approved	—	6522A13	0000
				1/8"	2 7/16"	Short	2 5/16"	13/16"	__	FM Approved	—	6522A14	0000
				5/32"	2 11/16"	Short	2 1/2"	7/8"	__	FM Approved	—	6522A15	00000
				3/16"	3 1/16"	Short	2 7/8"	7/8"	__	FM Approved	—	6522A16	00000
				7/32"	3 3/8"	Short	3 1/8"	1 1/16"	__	FM Approved	—	6522A17	00000
				1/4"	3 9/16"	Short	3 5/16"	1 1/16"	__	FM Approved	—	6522A18	00000
				5/16"	4 1/16"	Short	3 3/4"	1 3/8"	__	FM Approved	—	6522A31	00000
				3/8"	4 11/16"	Short	4 5/16"	1 7/16"	__	FM Approved	—	6522A21	00000
				1/2"	5 3/4"	Short	5 1/4"	1 3/4"	__	FM Approved	—	6522A23	00000


				3/4"	8"	Short	7 1/4"	2 1/4"	__	FM Approved	—	6522A27	000000
				1.5 mm	2 9/16"	Short	2 1/2"	13/16"	__	FM Approved	DIN 911	6522A51	0000
				2 mm	2 5/8"	Short	2 1/2"	13/16"	__	FM Approved	DIN 911	6522A52	0000
				2.5 mm	2 5/8"	Short	2 1/2"	13/16"	__	FM Approved	DIN 911	6522A53	0000
				3 mm	2 5/8"	Short	2 1/2"	13/16"	__	FM Approved	DIN 911	6522A54	00000
				4 mm	2 15/16"	Short	2 13/16"	1"	__	FM Approved	DIN 911	6522A56	00000
				5 mm	3 5/16"	Short	3 1/8"	1 1/8"	__	FM Approved	DIN 911	6522A57	00000
				6 mm	3 13/16"	Short	3 9/16"	1 5/16"	__	FM Approved	DIN 911	6522A58	00000
				8 mm	4 5/16"	Short	3 15/16"	1 7/16"	__	FM Approved	DIN 911	6522A59	00000

Nonsparking L-Key Sets

Made of beryllium copper that is Factory Mutual (FM) approved, these L-key sets won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.

Warning: Do not use these tools in direct contact with acetylene.

Short—A short long leg fits into tight spaces where you have less room to swing, making these ideal for confined areas.

	Finish	Container Type	Specifications Met		Each
Beryllium Copper







	Hex

	10	1/16" Hex L-Key (1 13/16" O'all Lg.) 5/64" Hex L-Key (2" O'all Lg.) 3/32" Hex L-Key (2" O'all Lg.) 1/8" Hex L-Key (2 7/16" O'all Lg.) 5/32" Hex L-Key (2 11/16" O'all Lg.) 3/16" Hex L-Key (3 1/16" O'all Lg.) 7/32" Hex L-Key (3 3/8" O'all Lg.) 1/4" Hex L-Key (3 9/16" O'all Lg.) 5/16" Hex L-Key (4 1/16" O'all Lg.) 3/8" Hex L-Key (4 11/16" O'all Lg.)	Short	__	Canvas Pouch	FM Approved	6522A41	0000000


	10	1.5 mm Hex L-Key (2 9/16 O'all Lg.) 2 mm Hex L-Key (2 9/16" O'all Lg.) 3 mm Hex L-Key (2 5/8" O'all Lg.) 4 mm Hex L-Key (2 15/16" O'all Lg.) 5 mm Hex L-Key (3 5/16" O'all Lg.) 6 mm Hex L-Key (3 13/16" O'all Lg.) 7 mm Hex L-Key (4 1/16" O'all Lg.) 8 mm Hex L-Key (4 5/16" O'all Lg.) 9 mm Hex L-Key (4 1/2" O'all Lg.) 10 mm Hex L-Key (4 3/4" O'all Lg.)	Short	__	Canvas Pouch	FM Approved	6522A42	000000

Nonsparking Screwdrivers

Made of beryllium copper that is Factory Mutual (FM) approved, these screwdrivers won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.

These no-frills drivers are ideal for industrial maintenance, withstanding years of heavy use in the shop and on the jobsite. The hard plastic handle won't crack or wear out from drops and scrapes. It's also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike a soft handle.

Warning: Do not use these screwdrivers in direct contact with acetylene.

Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without slippage, which would wear on screw heads and the driver's tip.

Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.

Standard Length—The most common screwdriver length for a specific drive size.

Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.

				Shaft
	Drive Size	Relative Lg.	Overall Lg.	Lg.	Overall Wd.	Material	Mfr.	Certification		Each
Phillips







				Premium

				No. 0	Standard	6"	2 3/8"	1/8"	Beryllium Copper	Ampco Safety Tools	FM Approved	6529A5	000000


				No. 1	Standard	6 1/2"	3"	3/16"	Beryllium Copper	Ampco Safety Tools	FM Approved	6529A1	00000
				No. 2	Standard	7 1/2"	4"	1/4"	Beryllium Copper	Ampco Safety Tools	FM Approved	6529A2	00000
				No. 3	Standard	10 1/8"	6"	5/16"	Beryllium Copper	Ampco Safety Tools	FM Approved	6529A3	00000
				No. 4	Standard	13"	8"	3/8"	Beryllium Copper	Ampco Safety Tools	FM Approved	6529A4	00000


				Slotted







								Premium

								1/8"	Standard	5 1/2"	2 3/8"	3/16"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A31	00000


								1/8"	Long	9 1/2"	6"	1/4"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A6	00000
								5/32"	Standard	6 1/2"	2 3/4"	3/16"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A34	00000
								5/32"	Long	8 1/2"	4 3/4"	3/16"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A35	00000
								3/16"	Standard	6 5/8"	3 1/8"	1/4"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A7	00000
								3/16"	Long	13"	9 1/4"	3/16"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A36	00000
								1/4"	Stubby	5"	1 1/2"	1/4"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A37	00000
								1/4"	Standard	7 5/8"	4"	5/16"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A5	00000
								1/4"	Long	9 5/8"	5 7/8"	1/4"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A32	00000
								5/16"	Standard	6 1/2"	3"	3/8"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A1	00000
								5/16"	Long	10 1/8"	6"	7/16"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A2	00000


								3/8"	Standard	13"	8"	1/2"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A3	00000
								3/8"	Long	17"	12"	1/2"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A4	00000
								3/8"	Long	23"	18"	3/8"	Beryllium Copper	Ampco Safety Tools	FM Approved	6525A38	000000

Nonsparking Screwdriver Sets

Made of beryllium copper that is Factory Mutual (FM) approved, the screwdrivers in these sets won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.

These no-frills sets are ideal for industrial maintenance, withstanding years of heavy use in the shop and on the jobsite. The hard plastic handles won't crack or wear out from drops and scrapes. They're also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike soft handles.

Warning: Do not use these screwdrivers in direct contact with acetylene.

	Mfr.	Certification	Container Type		Each
Phillips and Slotted







	Premium

	4	5/16" Slotted Screwdriver—6 1/2" O'all Lg. 5/16" Slotted Screwdriver—10 1/4" O'all Lg. 3/8" Slotted Screwdriver—13" O'all Lg. No. 2 Phillips Screwdriver—7 1/2" O'all Lg.	Beryllium Copper	Ampco Safety Tools	FM Approved	Canvas Roll-Up Pouch	6525A21	0000000


	6	5/16" Slotted Screwdriver—6 1/2" O'all Lg. 5/16" Slotted Screwdriver—10 1/4" O'all Lg. 3/8" Slotted Screwdriver—13" O'all Lg. No. 1 Phillips Screwdriver—6 1/2" O'all Lg. No. 2 Phillips Screwdriver—7 1/2" O'all Lg. No. 3 Phillips Screwdriver—10 1/4" O'all Lg.	Beryllium Copper	Ampco Safety Tools	FM Approved	Canvas Roll-Up Pouch	6525A22	000000

Nonsparking Wire-Forming Pliers

Made of beryllium copper that is FM approved, these nonmagnetic pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as round-nose pliers, use them for looping and bending wire. They have plastic grips for comfort.

Warning: Do not use these tools in direct contact with acetylene.

		Jaw
	Overall Lg.	Lg.	Opening Style	Texture	Tip Dia.	Material	With Wire Cutter	Certification	Performance		Each
Round Jaws and Cushion Grip



		6 1/4"	1 1/2"	Manual	Smooth	3/32"	Beryllium Copper	No	FM Approved	Nonmagnetic, Nonsparking	2969N1	0000000