Extra-long bits allow access to hard-to-reach fasteners.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Switch out worn or damaged bits instead of replacing your entire bit socket.

The short bit on these sockets fits in spaces where height clearance is limited.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.

The knurled shank on these bits allows finger tightening. They can also be used with the included screwdriver.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.

LEDs light the tip so you can use these tools in dark areas.

The ball-end tip allows angled entry to turn screws in hard-to-reach areas. These tools are a scaled-down version of standard changeable-shaft screwdrivers, They're shorter, slimmer, and easy to take with you. Remove and replace the shaft to change the tip size.

These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.

Sets include an assortment of drivers with soft, contoured handles that provide comfort and the best possible grip for achieving maximum torque.

Even oily hands can keep a firm grip on the suede-like textured handle.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

Carry these slim-handled tools comfortably in your pocket.

Sets include an assortment of drivers with a straight slotted tip that fills the screw slot better than the tapered tip on standard screwdrivers for more torque and less slippage. They're also known as hollow-tip or parallel ground screwdrivers.

Also known as hollow-tip or parallel ground screwdrivers, the straight slotted tip fills the screw slot better than the tapered tip on standard screwdrivers for more torque and less slippage.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

The handle on these assorted drivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They're also known as ESD-safe screwdrivers.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

These assorted shafts attach to a handle or can be used with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.