About Plastic Hammer Faces
More
About Hammers
More
Blacksmiths' Hammers
Strike metal, concrete, and stone with the flat end of these hammers; the wedge-shaped end is for bending and shaping metal. They're also known as cross-peen hammers. For replacement handles, see Hickory Hammer Handles.
Hickory handles resist vibration. Steel handles are stronger than hickory handles but have less vibration resistance. Fiberglass handles resist breakage if you miss your mark.
Textured and ribbed grips provide slip resistance.
Head Wt., lbs. | Face Dia. | Overall Lg. | Face Material | Handle Replaceable | Each | |
Hickory Handle—Plain Grip | ||||||
---|---|---|---|---|---|---|
3 | 1 3/4" | 15" | Steel | Replaceable | 000000 | 000000 |
4 | 1 7/8" | 15" | Steel | Replaceable | 000000 | 00000 |
Steel Handle—Textured Grip | ||||||
2 | 1 3/8" | 14" | Steel | Nonreplaceable | 0000000 | 00000 |
3 | 1 3/4" | 16" | Steel | Nonreplaceable | 0000000 | 00000 |
Fiberglass Handle—Ribbed Grip | ||||||
3 | 1 5/8" | 14" | Steel | Replaceable | 0000000 | 00000 |
4 | 1 3/4" | 14" | Steel | Replaceable | 0000000 | 00000 |
Nonsparking Blacksmiths' Hammers
The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use the flat end of the head to strike metal, concrete, and stone; the wedge-shaped end is for shaping and bending metal. These tools are also known as cross-peen hammers. A textured grip provides slip resistance. For replacement handles, see Fiberglass Hammer Handles.
Warning: Do not use these tools in direct contact with acetylene.
Head Wt., lbs. | Face Lg. | Face Wd. | Overall Lg. | Face Material | Handle Replaceable | Specifications Met | Each | |
Fiberglass Handle with Textured Grip | ||||||||
---|---|---|---|---|---|---|---|---|
1 1/2 | 1 5/16" | 1 5/16" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 0000000 |
2 1/2 | 1 1/2" | 1 1/2" | 15" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
3 1/2 | 1 7/8" | 1 7/8" | 15" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
Sledge Hammers
Demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, choose a hammer with a face that's harder than your workpiece. Longer and heavier hammers deliver greater impact.
10" to 16" long hammers are also known as engineers', drilling, club, and crack hammers. Use them for light demolition and tasks where longer hammers don't have room to swing.
20" and longer hammers can be swung with both hands to deliver a more powerful strike than shorter hammers.
Brass faces are suitable for striking steel, iron, and stone.
Bronze faces are good for striking non-ferrous metal, such as aluminum, nickel, and titanium.
Steel faces are the hardest metal faces we offer. Use them on stone, concrete, and hardened nails.
Hickory handles resist vibration. Steel handles are stronger than wooden handles but have less vibration resistance. Handles with a fiberglass core resist breakage if you miss your mark.
Textured and ribbed grips provide slip resistance.
Hammers | Replacement Handles | ||||||||
---|---|---|---|---|---|---|---|---|---|
Head Wt., lbs. | Face Dia. | Face Lg. | Face Wd. | Overall Lg. | Handle Replaceable | Each | Each | ||
Rectangular Bronze Face | |||||||||
Hickory Handle—Ribbed Grip | |||||||||
1 3/8 | __ | 7/8" | 7/8" | 12" | Replaceable | 0000000 | 000000 | 00000000 | 000000 |
2 1/4 | __ | 1 1/4" | 1 1/4" | 13" | Replaceable | 0000000 | 00000 | 00000000 | 00000 |
4 1/4 | __ | 1 1/2" | 1 1/2" | 14" | Replaceable | 0000000 | 000000 | 00000000 | 00000 |
Polyurethane Rubber Handle with Fiberglass Core—Ribbed Grip | |||||||||
1 1/2 | __ | 7/8" | 7/8" | 12" | Nonreplaceable | 0000000 | 00000 | 000000 | 00 |
2 3/8 | __ | 1 1/4" | 1 1/4" | 12" | Nonreplaceable | 0000000 | 000000 | 000000 | 00 |
4 3/8 | __ | 1 1/2" | 1 1/2" | 14" | Nonreplaceable | 0000000 | 000000 | 000000 | 00 |
Round Brass Face | |||||||||
Hickory Handle—Textured Grip | |||||||||
8 | 2" | __ | __ | 24" | Replaceable | 0000000 | 000000 | 0000000 | 00000 |
10 | 2 1/4" | __ | __ | 24" | Replaceable | 0000000 | 000000 | 0000000 | 00000 |
12 | 2 1/4" | __ | __ | 31" | Replaceable | 0000000 | 000000 | 0000000 | 00000 |
15 | 2 1/2" | __ | __ | 36" | Replaceable | 0000000 | 000000 | 0000000 | 000000 |
Steel Handle—Textured Grip | |||||||||
8 | 2" | __ | __ | 20" | Nonreplaceable | 00000000 | 000000 | 000000 | 00 |
10 | 2 1/8" | __ | __ | 30" | Nonreplaceable | 00000000 | 000000 | 000000 | 00 |
15 | 2 1/2" | __ | __ | 30" | Nonreplaceable | 00000000 | 000000 | 000000 | 00 |
Round Steel Face | |||||||||
Hickory Handle—Plain Grip | |||||||||
2 1/2 | 1 1/2" | __ | __ | 15 1/2" | Replaceable | 000000 | 00000 | 000000 | 00 |
3 | 1 5/8" | __ | __ | 10" | Replaceable | 000000 | 00000 | 000000 | 00 |
3 | 1 3/4" | __ | __ | 15 1/2" | Replaceable | 000000 | 00000 | 000000 | 00 |
4 | 1 3/4" | __ | __ | 10" | Replaceable | 000000 | 00000 | 000000 | 00 |
4 | 2" | __ | __ | 15 1/2" | Replaceable | 000000 | 00000 | 000000 | 00 |
6 | 2" | __ | __ | 15 1/2" | Replaceable | 000000 | 00000 | 000000 | 00 |
6 | 2 1/4" | __ | __ | 35" | Replaceable | 0000000 | 00000 | 000000 | 00 |
8 | 2" | __ | __ | 15 1/2" | Replaceable | 000000 | 00000 | 000000 | 00 |
8 | 2 3/8" | __ | __ | 35" | Replaceable | 0000000 | 00000 | 000000 | 00 |
10 | 2 1/2" | __ | __ | 35" | Replaceable | 0000000 | 00000 | 000000 | 00 |
12 | 2 5/8" | __ | __ | 35" | Replaceable | 0000000 | 00000 | 000000 | 00 |
16 | 2 7/8" | __ | __ | 35" | Replaceable | 0000000 | 00000 | 000000 | 00 |
20 | 3 1/8" | __ | __ | 36" | Replaceable | 0000000 | 00000 | 000000 | 00 |
Steel Handle—Textured Grip | |||||||||
2 | 1 1/8" | __ | __ | 10 1/2" | Nonreplaceable | 000000 | 00000 | 000000 | 00 |
2 1/2 | 1 1/2" | __ | __ | 13 1/2" | Nonreplaceable | 0000000 | 00000 | 000000 | 00 |
3 | 1 1/4" | __ | __ | 11" | Nonreplaceable | 000000 | 00000 | 000000 | 00 |
4 | 1 1/4" | __ | __ | 11 1/2" | Nonreplaceable | 000000 | 00000 | 000000 | 00 |
4 | 1 1/4" | __ | __ | 16" | Nonreplaceable | 000000 | 00000 | 000000 | 00 |
Polypropylene Plastic Handle with Fiberglass Core—Ribbed Grip | |||||||||
3 | 1 3/8" | __ | __ | 10" | Replaceable | 0000000 | 00000 | 000000 | 00 |
3 | 1 5/8" | __ | __ | 14" | Replaceable | 00000000 | 00000 | 000000 | 00 |
4 | 1 1/2" | __ | __ | 10" | Replaceable | 0000000 | 00000 | 000000 | 00 |
4 | 1 3/4" | __ | __ | 14" | Replaceable | 00000000 | 00000 | 000000 | 00 |
6 | 2 1/8" | __ | __ | 16" | Replaceable | 0000000 | 00000 | 000000 | 00 |
6 | 2 1/8" | __ | __ | 32" | Replaceable | 0000000 | 00000 | 000000 | 00 |
8 | 2 1/4" | __ | __ | 16" | Replaceable | 0000000 | 00000 | 000000 | 00 |
8 | 2 1/4" | __ | __ | 32" | Replaceable | 0000000 | 00000 | 000000 | 00 |
10 | 2 1/2" | __ | __ | 32" | Replaceable | 0000000 | 00000 | 000000 | 00 |
12 | 2 5/8" | __ | __ | 32" | Replaceable | 0000000 | 00000 | 000000 | 00 |
16 | 2 7/8" | __ | __ | 34 1/2" | Replaceable | 0000000 | 000000 | 000000 | 00 |
20 | 3 1/4" | __ | __ | 34 1/4" | Replaceable | 0000000 | 000000 | 000000 | 00 |
Rubber Handle with Steel Core—Textured Grip | |||||||||
8 | 2 1/8" | __ | __ | 24" | Nonreplaceable | 0000000 | 000000 | 000000 | 00 |
8 | 2 1/8" | __ | __ | 30" | Nonreplaceable | 0000000 | 000000 | 000000 | 00 |
14 | 2 3/8" | __ | __ | 30" | Nonreplaceable | 0000000 | 000000 | 000000 | 00 |
Create-Your-Own Sledge Hammers
Swing these long, heavy hammers with both hands to demolish material, form metal, and drive punches, chisels, and masonry drills. Mix faces of different materials or hardnesses to create the perfect striking tool. For demolition work, choose faces that are harder than your workpiece. The head has two pieces that clamp together to grip faces tightly.
Bodies consist of a head, nut, and handle. To assemble, loosen the nut under the head, insert the faces, and tighten the nut.
Rubber faces are softer than metal faces, so they're good for sheet metal work. All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
Hard faces have a hardness similar to that of a bowling ball.
Face Dia. | Face Hardness Rating | Face Color | Each | |
2 3/4" | Hard | Off-White | 0000000 | 000000 |
Plastic faces are softer than metal faces, so they're good for sheet metal work. All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
Extra-hard faces have a hardness similar to that of a hard hat.
Face Dia. | Face Hardness Rating | Face Color | Each | |
2 3/4" | Extra Hard | Yellow | 0000000 | 000000 |
Rawhide faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.
Face Dia. | Each | |
2 3/4" | 0000000 | 000000 |
Nonsparking Sledge Hammers
The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, ensure that the workpiece is softer than the metal faces. Longer and heavier hammers deliver greater impact. All have a textured or ribbed grip for slip resistance. For replacement handles, see Fiberglass Hammer Handles.
14" long hammers are also known as engineers', drilling, club, lump, and crack hammers. Use them for light demolition and tasks where longer hammers don't have room to swing.
33" long hammers can be swung with both hands to deliver a more powerful strike than shorter hammers.
Warning: Do not use these tools in direct contact with acetylene.
Head Wt., lbs. | Face Dia. | Overall Lg. | Handle Material | Grip Style | Handle Replaceable | Specifications Met | Each | |
Aluminum-Bronze Face | ||||||||
---|---|---|---|---|---|---|---|---|
2 | 1 3/8" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
2 1/2 | 1 3/8" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
2 3/4 | 1 1/2" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
3 | 1 1/2" | 14" | Fiberglass | Textured | Replaceable | FM Approved | 0000000 | 000000 |
6 | 2" | 33" | Fiberglass | Ribbed | Replaceable | FM Approved | 0000000 | 000000 |
8 | 2 1/8" | 33" | Fiberglass | Ribbed | Replaceable | FM Approved | 0000000 | 000000 |
10 | 2 1/4" | 33" | Fiberglass | Ribbed | Replaceable | FM Approved | 0000000 | 000000 |
16 | 2 5/8" | 33" | Fiberglass | Ribbed | Replaceable | FM Approved | 0000000 | 000000 |
Dead Blow Sledge Hammers
These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. A fluorescent orange color makes them easy to see. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. All have a long handle and heavy head to deliver a powerful strike. Made from polyurethane rubber, the faces resist oil and solvents and won't crack under high impact. The hardness of the faces is similar to that of a tire tread.
Head Wt., lbs. | Face Dia. | Face Hardness Rating | Face Color | Overall Lg. | Handle Material | Grip Style | Handle Color | Handle Replaceable | Each | |
Polyurethane Rubber Face | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
10 1/2 | 3 3/8" | Soft | Fluorescent Orange | 30" | Polyurethane Rubber with Steel Core | Textured | Fluorescent Orange | Nonreplaceable | 0000000 | 0000000 |
11 1/2 | 3 3/8" | Soft | Fluorescent Orange | 36 1/4" | Polyurethane Rubber with Steel Core | Textured | Fluorescent Orange | Nonreplaceable | 0000000 | 000000 |
Replaceable-Face Dead Blow Sledge Hammers
Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, choose a hammer with a face that's harder than your workpiece. Longer and heavier hammers deliver greater impact.
Screw-in hammers have polyurethane rubber faces that resist oils and solvents and won't crack under high impact. Each face can be switched out for a face with a different hardness. The medium face has a hardness that's suitable for most general purpose applications. The extra-hard face has a hardness similar to that of a hard hat.
Press-fit hammers have nylon plastic faces with a hardness similar to that of a bowling ball.
Face Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Head Wt., lbs. | Face Dia. | Face Hardness Rating (Face Color) | Size | Type | Overall Lg. | Head Material | Handle Material | Grip Style | Handle Replaceable | Each | |
Screw-In Polyurethane Rubber Face | |||||||||||
7 1/2 | 2 1/2" | Medium (Green) × Extra Hard (Black) | 7/16"-14 | UNC | 32" | Iron | Hickory | Plain | Replaceable | 000000 | 0000000 |
7 1/2 | 3" | Medium (Green) × Extra Hard (Black) | 1/2"-13 | UNC | 35" | Aluminum | Hickory | Plain | Replaceable | 000000 | 000000 |
11 1/2 | 3" | Medium (Green) × Extra Hard (Black) | 1/2"-13 | UNC | 35" | Iron | Hickory | Plain | Replaceable | 000000 | 000000 |
Press-Fit Nylon Plastic Face | |||||||||||
13 1/4 | 4" | Hard (White) | __ | __ | 39 1/4" | Steel | Hickory | Plain | Replaceable | 0000000 | 000000 |
19 3/4 | 4" | Hard (White) | __ | __ | 39 1/4" | Steel | Hickory | Plain | Replaceable | 0000000 | 000000 |
Soft faces have a hardness similar to that of a tire tread.
Medium faces have a hardness that's suitable for most general purpose applications.
Hard faces have a hardness similar to that of a bowling ball.
Extra-hard faces have a hardness similar to that of a hard hat.
Hard faces have a hardness similar to that of a bowling ball.
Hard (White) | ||
---|---|---|
Face Dia. | Each | |
4" | 0000000 | 000000 |
Mallets
Drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with faces that are softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
Bronze faces are good for striking non-ferrous metal, such as aluminum, nickel, and titanium.
Hickory handles resist vibration.
Textured and ribbed grips provide slip resistance.
Mallets | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Rectangular Face | Replacement Handles | ||||||||||
Head Wt. | Round Face Dia. | Lg. | Wd. | Overall Lg. | Grip Style | Handle Replaceable | Each | Each | |||
Round × Rectangular Face with Hickory Handle | |||||||||||
Q | 12 oz. | 13/16" | 3/8" | 3/8" | 11" | Ribbed | Replaceable | 0000000 | 000000 | 00000000 | 000000 |
Q | 1 1/4 lbs. | 1" | 1/2" | 1/2" | 12" | Ribbed | Replaceable | 0000000 | 00000 | 00000000 | 00000 |
Q | 1 1/2 lbs. | 1 1/8" | 5/8" | 5/8" | 13" | Ribbed | Replaceable | 0000000 | 00000 | 00000000 | 00000 |