Dual-Wheel Vertical Band Saw Blade Guides for Delta, Jet, and Rikon Saws
Upgrade to dual-wheel support on the blade of your Delta, Jet, or Rikon saw for more accurate straight and contoured cuts. They have a ball-bearing construction for excellent support in high-load operations.
Single-Wheel Vertical Band Saw Blade Guides
A ball bearing wheel and PTFE rub block support your band saw’s blade for more accurate straight and contoured cuts during general purpose cutting. They adjust to fit various blade widths and thicknesses, and they adapt for right- and left-hand mounting near the top or bottom wheel. Mounting holes on the back of each guide fit onto your saw's mounting stud, and set screws lock the guide in place. These guides fit most band saws.
Guides | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Stud | Replacement Mounting Studs | Replacement Support Blocks | Replacement Thrust Wheels | ||||||||||
| For Wheel Dia. | For Blade Wd. | Ht. | Wd. | Dp. | Dia. | Lg. | Each | Each | Pair | Each | ||||
| 14"-20" | 3/16"-3/4" | 2 1/4" | 3" | 1 7/8" | 7/16" | 3" | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 | 00000000 | 000000 |
| 16"-36" | 3/16"-1 1/4" | 3" | 4" | 2 1/2" | 3/4" | 4 1/2" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 00000000 | 00000 |
| 30"-42" | 3/16"-1 3/4" | 4" | 4 1/4" | 3" | 3/4" | 4 1/2" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | 00000000 | 00000 |
Dual-Wheel Vertical Band Saw Blade Guides
Two ball bearing wheels support band saw blades and accurately guide straight and contoured cuts in more rugged-duty applications than a single wheel guide. They adjust to fit various blade widths and thicknesses and adapt for right- and left-hand mounting near the top or bottom wheel. Mounting holes on the back of each guide fit onto your saw's mounting stud, and set screws lock the guide in place. These guides fit most band saws.
Guides | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Stud | Replacement Mounting Studs | Replacement Support Wheels | Replacement Thrust Wheels | ||||||||||
| For Wheel Dia. | For Blade Wd. | Ht. | Wd. | Dp. | Dia. | Lg. | Each | Each | Each | Each | ||||
| 14"-30" | 3/16"-3/4" | 2 3/4" | 2 1/4" | 1 3/4" | 7/16" | 3" | 0000000 | 0000000 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
| 30"-42" | 1/4"-1 1/2" | 4 1/4" | 3 3/4" | 2" | 3/4" | 4 1/2" | 0000000 | 000000 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 30"-42" | 1/4"-1 1/2" | 4 1/4" | 4" | 3 1/4" | 3/4" | 4 1/2" | 0000000 | 000000 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Cutting Guides
Clamp one of these guides onto your workpiece to make accurate cuts.
Style A guides are for making straight cuts. Use them with circular saws, jigsaws, and routers. They fit multiple workpiece sizes.
Style B guides are for making straight, beveled, and circular cuts. For straight or beveled cuts, attach a jigsaw or circular saw to the guide and use the slide like a T-square to keep your blade at a set distance from the edge as you cut. The guide has a range of 1" to 11 1/2" for jigsaws and 1" to 14" for circular saws. For circular cuts, use this guide like a compass and pencil to create a perfect circle between 6" and 24" in diameter. Drill a pilot hole in your workpiece at the center of the hole. One end of the guide fits into the pilot, and a jigsaw mounts to the other end. This keeps the blade at a fixed distance from the pivot as you cut. While cutting, use your free hand to ensure the saw stays in place.
For Max. Workpiece | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Wd. | Cutting Pattern | Material | Includes | Each | |
| 24" | 14" | 5" | Circle, Straight | Plastic | Centering Pin | 0000000 | 000000 |
Electric Circular Saws for Metal
Make long, straight cuts into steel sheets, structural framing, and other metal components. These handheld saws are good for longer cuts than chop saws. At a low speed, they’ll cut without burrs or excessive heat—no coolant required. They’ll also produce fewer sparks than saws with abrasive wheels. To keep your workspace clean, all can either blow metal chips out of the way or collect them during cutting.
Evolution and Fein 6 99 08 120 00 1 saws have a high-torque motor that powers the blade more efficiently than our other saws. This makes them the best choice for cutting hard, thick metal.
Saws with a brake stop rotating soon after you release the trigger, so you can quickly reposition your workpiece and make the next cut.
| Manufacturer Model Number | Current | For Blade Dia. | For Arbor Hole Size | No-Load Speed, rpm | Max. Cutting Dp. | Max. Bevel Cut Angle (Tilt Direction) | Wt., lbs. | Features | Blade Location | Includes | Each | |
Evolution | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S210CCS | 15 A @ 120 V AC | 8 1/4" | 1" | 2,800 | 3" | __ | 24.7 | Chip Collector, Brake, Cut-Line Guide | Right Side | One 8 1/4" Dia. Ceramic-Tipped Steel Blade for Steel (50 Teeth) | 00000000 | 0000000 |
Fein Power Tools | ||||||||||||
| 6 99 08 120 00 0 | 13 A @ 120 V AC | 7 1/4" | 20 mm | 3,800 | 2 1/2" | 45° (Right) | 15 | Chip Collector, Brake, Laser Guide | Right Side | One 7 1/4" Dia. Carbide-Tipped Steel Blade for Steel (36 Teeth); Plastic Case | 00000000 | 000000 |
| 6 99 08 120 00 1 | 15 A @ 120 V AC | 9" | 1" | 2,300 | 3 1/2" | 45° (Right) | 21 | Chip Collector, Brake, Laser Guide | Right Side | One 9" Dia. Carbide-Tipped Steel Blade for Steel (48 Teeth); Plastic Case | 00000000 | 000000 |