3 Hp Blowers | McMaster-Carr

Filter by

System of Measurement

Power

Electrical Phase

Outlet Diameter

Voltage

Outlet Shape

Airflow @ Static Pressure

5,500 ft³/min @ 0 in. H₂O

6,500 ft³/min @ 0 in. H₂O

7,750 ft³/min @ 0 in. H₂O

9,000 ft³/min @ 0 in. H₂O

21,000 ft³/min @ 0 in. H₂O

24,700 ft³/min @ 0 in. H₂O

25,300 ft³/min @ 0 in. H₂O

1,135 ft³/min @ 1/2 in. H₂O

5,000 ft³/min @ 1/2 in. H₂O

5,500 ft³/min @ 1/2 in. H₂O

7,000 ft³/min @ 1/2 in. H₂O

8,100 ft³/min @ 1/2 in. H₂O

15,700 ft³/min @ 1/2 in. H₂O

17,000 ft³/min @ 1/2 in. H₂O

19,400 ft³/min @ 1/2 in. H₂O

1,090 ft³/min @ 3 in. H₂O

1,200 ft³/min @ 3 in. H₂O

1,230 ft³/min @ 3 in. H₂O

Inlet Diameter

Housing Material

Motor Enclosure Type

Current

Wheel Diameter

Inverter Rated

Power Source

Airflow

Less than 10,000 ft³/min

10,000 ft³/min to 19,999 ft³/min

20,000 ft³/min to 29,999 ft³/min

40,000 ft³/min or greater

Maximum Temperature

Motor Speed

Full Load Current @ Voltage

Wheel Material

RoHS

Drive Type

Material

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Forward

How can we improve?

43 Products

High-Output Blowers

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard blowers can handle. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, drying, ventilating, and exhausting. Blowers that weigh 280 lbs. or less can also be used for material conveying.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.

With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure

Image of Product. Front orientation. Blowers. High-Output Blowers, Round Outlet.

Blowers with a totally enclosed motor enclosure can be used in dirty, dusty, and wet environments.

	Blowers																		Replacement Wheels
								Overall							Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Outlet Dia.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Wt., lb.	Current	Temp. Range, ° F	Housing Material	Fasteners Included	Hole Dia.		Each		Each
230V AC







				Single Phase—Hardwire

				1,080 ft³/min @ 5 in. H₂O 1,230 ft³/min @ 3 in. H₂O	70 dBA @ 15 ft.	3,450	3	5 15/16"	7"	13"	21 1/8"	19 1/8"	18 1/16"	100	13.0 amp	-10 to 150	Steel	No	7/16"	1953K38	000000000	1953K102	0000000


				230V AC/460V AC







								Three Phase—Hardwire

								1,000 ft³/min @ 5 in. H₂O 1,200 ft³/min @ 3 in. H₂O	70 dBA @ 15 ft.	3,450	3	6"	7"	13"	21 1/8"	19 1/8"	18 7/8"	95	7.3 amp/3.7 amp	-10 to 150	Steel	No	7/16"	1953K66	00000000	1953K83	000000

High-Output Spark-Resistant Blowers

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard spark-resistant blowers can handle. They have an aluminum housing for spark resistance. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure

Image of Product. Front orientation. Blowers. High-Output Spark-Resistant Blowers.

								Overall							Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Outlet Dia.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Wt., lb.	Current	Temp. Range, ° F	Housing Material	Fasteners Included	Hole Dia.		Each
120V AC/230V AC







				Single Phase—Hardwire

				900 ft³/min @ 5 in. H₂O 1,090 ft³/min @ 3 in. H₂O	71 dBA @ 15 ft.	3,450	3	6"	7"	11 1/2"	21 5/16"	18 1/2"	18 1/2"	142	29.0 amp/14.5 amp	-10 to 150	Aluminum	No	7/16"	1954K86	000000000


				230V AC/460V AC







								Three Phase—Hardwire

								900 ft³/min @ 5 in. H₂O 1,090 ft³/min @ 3 in. H₂O	71 dBA @ 15 ft.	3,450	3	6"	7"	11 1/2"	21 5/16"	18 1/2"	18 1/2"	135	7.3 amp/3.6 amp	-10 to 150	Aluminum	No	7/16"	1954K87	00000000

High-Flow Low-Pressure Compressed Air Blowers

Also known as regenerative blowers, use these to produce high-flow compressed air with low pressure or vacuum to operate pump drives, lift tables, and conveying systems. Compressed air blowers are also used for drying, exhausting, and aeration.

Air circulates inside the blower housing to compress air, which generates pressure or vacuum.

Single Stage

Single-stage blowers circulate air once and then exhaust.

Inverter Rated—Inverter-rated blowers have a motor that can run at slow speeds without overheating, so they can be used with a motor speed control (variable frequency drive).

	Blowers														Valves
							Overall				Pipe Size
	Max. Pressure	Max. Flow Rate @ Pressure	Vacuum Rating	Power, hp	Full Load Current @ Voltage	Volume (Sound), dB	Lg.	Wd.	Ht.	Temp. Range, ° F	Inlet	Outlet		Each		Each
Three Phase, 208/230/460V AC (Inverter Rated)







				NPT Female Inlet and Outlet

				2 psi 80 in. H₂O	156 ft³/min @ 0 psi	6.6 in. Hg 89 in. H₂O	3	8.2 amp @ 208V AC 8.3 amp @ 230V AC 4.1 amp @ 460V AC	71	14"	13"	14"	5 to 100	2	2	4393K53	000000000	4393K41	0000000

Two Stage

Two-stage blowers circulate air twice and then exhaust, creating higher pressure or vacuum than single-stage blowers with the same horsepower.

Inverter Rated—Inverter-rated blowers have a motor that can run at slow speeds without overheating, so they can be used with a motor speed control (variable frequency drive).

	Blowers														Valves
							Overall				Pipe Size
	Max. Pressure	Max. Flow Rate @ Pressure	Vacuum Rating	Power, hp	Full Load Current @ Voltage	Volume (Sound)	Lg.	Wd.	Ht.	Temp. Range, ° F	Inlet	Outlet		Each		Each
Single Phase, 120/208/230V AC







				NPT Female Inlet and Outlet

				5 psi 141 in. H₂O	81 ft³/min @ 0 psi	11.1 in. Hg 151 in. H₂O	3	29.4 amp @ 115V AC 16.6 amp @ 208V AC 14.8 amp @ 230V AC	73 dB	15"	14"	15"	5 to 100	1 1/4	1 1/4	4393K65	000000000	4393K41	0000000


				Three Phase, 208/230/460V AC (Inverter Rated)







								NPT Female Inlet and Outlet

								5 psi 141 in. H₂O	81 ft³/min @ 0 psi	11.1 in. Hg 151 in. H₂O	3	8.3 amp @ 208V AC 7.4 amp @ 230V AC 4 amp @ 460V AC	73 dBA	16"	14"	15"	5 to 100	1 1/4	1 1/4	4393K38	00000000	4393K41	000000


								6 psi 191 in. H₂O	65 ft³/min @ 0 psi	11.1 in. Hg 151 in. H₂O	3	8.2 amp @ 208V AC 8.3 amp @ 230V AC 4.1 amp @ 460V AC	73 dB	15"	13"	14"	5 to 100	1 1/4	1 1/4	4393K64	00000000	4393K41	000000

Floor-Mount Fume Exhausters

Black Powder-Coated Steel

Mount these exhausters to the floor to remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes.

Totally Enclosed Motor Enclosure—Totally enclosed exhausters have an external fan for cooling. These exhausters offer more protection than open dripproof exhausters. They can be used in dirty, dusty, and damp environments, but are not airtight.

Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

						Overall						Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Power, hp	Inlet Dia.	Outlet Dia.	Ht.	Wd.	Dp.	Housing Material	Base Material	Wheel Material	Fasteners Included	For Screw Size	Hole Dia.	No. of Holes		Each
Totally Enclosed Motor Enclosure







				230V AC, Single Phase—Hardwire

				1,135 ft³/min @ 1/2 in. H₂O	78 dBA @ 15 ft.	3	6"	6"	22 7/8"	19 1/8"	18 1/4"	Black Powder-Coated Steel	Steel	Aluminum	No	3/8"	7/16"	4	1951K119	000000000




						230V AC/460V AC, Three Phase—Hardwire

						1,135 ft³/min @ 1/2 in. H₂O	78 dBA @ 15 ft.	3	6"	6"	22 7/8"	19 1/8"	19 7/8"	Black Powder-Coated Steel	Steel	Aluminum	No	3/8"	7/16"	4	1951K121	00000000

Duct Kits

Single-Duct Kits for Exhausters with 6" Inlet Diameter—Single-duct kits (sold separately) maximize airflow at one fume collection point. They include a hose, a nozzle, and two clamps.

Dual-Duct Kits for Exhausters with 6" Inlet Diameter—Dual-duct kits (sold separately) create two points for fume collection, although each will have lower airflow than the one collection point of a single-duct kit. These kits include two hoses, two nozzles, four clamps, and a wye connector.

		Each
Single-Duct Kits for Exhausters with 6" Inlet Diameter	2154K44	0000000
Dual-Duct Kits for Exhausters with 6" Inlet Diameter	2154K62	000000

High-Output Hazardous Location Spark-Resistant Blowers

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle. They have an explosion-proof motor that is UL listed for hazardous locations. They also have an aluminum housing for spark resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.

With Round Outlet and Round Inlet

Image of Product. Front orientation. Blowers. High-Output Hazardous Location Spark-Resistant Blowers.

								Overall								Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Outlet Dia.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Wt., lb.	Current	Temp. Range, ° F	Housing Material	Hazardous Location Rating	Fasteners Included	Hole Dia.		Each
230V AC/460V AC







				Three Phase—Hardwire

				1,090 ft³/min @ 3 in. H₂O	71 dBA @ 15 ft.	3,450	3	6"	7"	11 1/2"	21 5/16"	18 1/2"	21 3/4"	167	7.5 amp/3.8 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	1954K106	000000000

Direct-Drive Exhaust Fans

With fewer moving parts than belt-drive fans, these direct-drive exhaust fans require less maintenance. They have a built-in grease pan to collect waste while cooking. Mount these fans directly to your roof with the attached mounting brackets. They meet UL standards for ventilation in residential, commercial, and institutional kitchens.

208V AC, Three Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure

Image of Product. Front orientation. Exhaust Fans. Direct-Drive Exhaust Fans.

Blade Dia.	Airflow @ SP	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Overall Ht.	Base Wd.	Max. Ambient Temp., ° F	Housing Material	Blade Material	Features	Specs. Met	Certification		Each
21"	5,000 ft³/min @ 1/2 in. H₂O 5,500 ft³/min @ 0 in. H₂O	77 dB @ 5 ft.	Direct	1,275	Variable	3	71 7/8"	38 1/4"	350	Steel	Aluminum	Grease Pan	UL 705, UL 762, ULC-S645	ETL Listed	4706N15	000000000
25"	5,500 ft³/min @ 1/2 in. H₂O 6,500 ft³/min @ 0 in. H₂O	72 dB @ 5 ft.	Direct	900	Variable	3	80 3/8"	49 1/4"	350	Steel	Steel	Grease Pan	UL 705, UL 762, ULC-S645	ETL Listed	4706N16	00000000

Dust-Resistant Direct-Drive Wall-Mount Exhaust Fans

Style 5

Better suited for dirty, dusty, and damp environments than standard direct-drive fans, these have a totally enclosed motor enclosure. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area.

230/460V AC, Three Phase (Hardwire)—Totally Enclosed Motor Enclosure

Style 5

Exhaust Fan Collars—Collars and louvers are sold separately. Use a collar to connect a wall-mount exhaust fan to a louver.

Exhaust Fans																	Exhaust Fan Collars
								Overall
Style	Blade Dia.	Airflow, ft³/min	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Dp.	Wt., lb.	Ambient Temp., ° F	Frame Material	Blade Material		Each		Each
5	30"	14,400	80 dB @ 5 ft.	Direct	1,750	1	3	36"	36"	14 1/4"	148	104	Steel	Steel	2222K11	000000000	5353K15	0000000

Low-Profile Direct-Drive Ceiling-Mount Fans

Ideal for low-clearance applications where you need headroom, these direct-drive fans are compact and have fewer moving parts than belt-drive fans for less maintenance. The louvers adjust so you can direct airflow in two directions at the same time. They have a polyethylene housing, so they’re durable and resist corrosion.

Fans with Totally Enclosed Motor Enclosure

	Blade								Overall
	Dia.	Material	Airflow	Volume	Motor Speed, rpm	No. of Speeds	Power, hp	Current	Ht.	Wd.	Dp.	Drive Type	Housing Material	Enclosure Rating	Includes		Each
208V AC to 240V AC, Single Phase—Hardwire







				Non-Oscillating Fan

				58"	Plastic	40,400 ft³/min	Not Rated	600	1	3	9.9 amp to 11.3 amp	65 1/4"	65 1/4"	31"	Direct	Polyethylene	IP65	Mounting Chain Kit	4736N11	000000000


				190/208/240V AC, Three Phase—Hardwire







								Non-Oscillating Fan

								58"	Plastic	40,100 ft³/min	Not Rated	600	1	3	10.9 amp 11.7 amp 10.1 amp	65 1/4"	65 1/4"	31"	Direct	Polyethylene	IP65	Mounting Chain Kit	4736N12	00000000


								380/460V AC, Three Phase—Hardwire







												Non-Oscillating Fan

												58"	Plastic	41,000 ft³/min	Not Rated	600	1	3	6.2 amp 5.2 amp	65 1/4"	65 1/4"	31"	Direct	Polyethylene	IP65	Mounting Chain Kit	4736N13	00000000

Direct-Drive Upblast Roof-Mount Exhaust Fans


Style 1	Style 2

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. These exhaust fans draw stagnant and humid air out through your roof and then expel it up and away from the roof surface. All fans have a disconnect switch to turn off the power for servicing.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

	Exhaust Fans															Mounting Bases
							Overall
	Style	Blade Dia.	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Base Wd.	Wt., lb.	Ambient Temp., ° F	Housing Material	Certification		Each		Each
Open Dripproof (ODP) Motor Enclosure







				208 to 230V AC, Three Phase—Hardwire

				1	24"	7,000 ft³/min @ 1/2 in. H₂O 7,750 ft³/min @ 0 in. H₂O	72 dBA @ 5 ft.	900	3	41 7/8"	37 1/2"	33"	312	300	Aluminum	AMCA Certified, ETL Listed	2232K38	000000000	2230K39	0000000


				Totally Enclosed Motor Enclosure







								460V AC, Three Phase—Hardwire

								2	42"	17,000 ft³/min @ 1/2 in. H₂O 24,700 ft³/min @ 0 in. H₂O	75 dBA @ 5 ft.	1,150	3	50"	29 1/2"	54"	471	120	Steel	—	2081K15	00000000	2230K49	000000

Air Curtains

Produce a stream of air down a doorway or other opening to keep out dust, dirt, insects, and fumes while allowing personnel to pass through. These air curtains have wire leads for hardwiring.

Three-Phase Air Curtains

Three-phase air curtains require a control panel (sold separately).

	For Frame Opening		Overall
	Wd.	Ht.	Wd.	Ht.	Dp.	Airflow, ft³/min	Volume (Sound) @ Distance	No. of Motors	Power per Motor, hp	Current, amp	Electrical Connection	Certification	For Use Outdoors	Temp. Range, ° F		Each
460V AC



		144"	192"	144"	14"	15 5/8"	14,400	81 dBA @ 10 ft.	3	3	11.4	Wire Leads	ETL Listed	Yes	0 to 100	1077A65	000000000

Accessories for Air Curtains

	For Frame Opening
460V AC


120", 144"	144"	UL Listed	1077A182	000000000
120", 144"	192"	UL Listed	1077A186	00000000

		Each
Door Switch	1077A2	0000000

Hazardous Location Jet Stream Fans

UL listed for use in hazardous environments, these fans are often used to cool warehouse aisles and production lines. They generate a stream of air that travels farther than air from conventional fans. All fans have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.

Freestanding Fans with Wheels

Image of Product. Front orientation. Fans. Hazardous Location Jet Stream Fans, Wheels.

Fans with wheels can be rolled into place before they are hardwired. They do not allow for movement once the unit is in use.

Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

	Blade								Overall
	Dia.	Material	Airflow, ft³/min	Volume (Sound) @ Distance	Motor Speed, rpm	No. of Speeds	Power, hp	Current	Ht.	Wd.	Dp.	Fan Head Movement	Drive Type	Housing Material	Guard Material		Each
230/460V AC, Three Phase—Hardwire



		36"	Aluminum	20,000	86 dBA @ 5 ft.	1,750	1	3	8.2 amp/4.1 amp	51"	42"	32"	Non-Oscillating	Direct	Steel	Steel	1903K72	000000000

Freestanding Fans without Wheels

Image of Product. Front orientation. Fans. Hazardous Location Jet Stream Fans.

Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

	Blade								Overall
	Dia.	Material	Airflow, ft³/min	Volume (Sound) @ Distance	Motor Speed, rpm	No. of Speeds	Power, hp	Current	Ht.	Wd.	Dp.	Fan Head Movement	Drive Type	Housing Material	Guard Material		Each
230/460V AC, Three Phase—Hardwire



		36"	Aluminum	20,000	86 dBA @ 5 ft.	1,750	1	3	8.2 amp/4.1 amp	47"	42"	32"	Non-Oscillating	Direct	Steel	Steel	1903K74	000000000

Hazardous Location Upblast Roof-Mount Exhaust Fans

With a UL-listed motor, these fans can be used in hazardous environments with combustible gases and dust to draw stagnant and humid air out through your roof, forcing it up and away from its surface.

Direct Drive

Image of Product. Front orientation. Exhaust Fans. Hazardous Location Upblast Roof-Mount Exhaust Fans.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

	Exhaust Fans														Mounting Bases
						Overall
	Blade Dia.	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Base Wd.	Wt., lb.	Max. Ambient Temp., ° F	Housing Material	Hazardous Location Rating		Each		Each
Totally Enclosed Motor Enclosure







				240/460V AC, Three Phase—Hardwire

				36"	15,700 ft³/min @ 1/2 in. H₂O 21,000 ft³/min @ 0 in. H₂O	79 dBA @ 5 ft.	1,150	3	45"	31"	48"	480	100	Steel	NEC Class I Divisions 1, 2 Groups C, D; NEC Class II Divisions 1, 2 Groups E, F, G	4746N13	000000000	2230K48	0000000


				42"	19,400 ft³/min @ 1/2 in. H₂O 25,300 ft³/min @ 0 in. H₂O	80 dBA @ 5 ft.	1,150	3	51"	34"	54"	520	100	Steel	NEC Class I Divisions 1, 2 Groups C, D; NEC Class II Divisions 1, 2 Groups E, F, G	4746N14	00000000	2230K49	000000

Jet-Stream Floor Fans

Often used to cool warehouse aisles and production lines, these fans generate a stream of air that travels farther than air from conventional fans.They have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.

Without Wheels—Hardwire

Image of Product. Front orientation. Fans. Jet-Stream Floor Fans.

Drive Type—Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

	Blade								Overall
	Dia.	Material	Airflow, ft³/min	Volume (Sound) @ Distance	Motor Speed, rpm	No. of Speeds	Power, hp	Current	Ht.	Wd.	Dp.	Fan Head Movement	Housing Material	Guard Material	Drive Type		Each
230/460V AC, Three Phase



		36"	Aluminum	20,000	86 dBA @ 5 ft.	1,750	1	3	8.2 amp/4.1 amp	40"	36"	24"	Non-Oscillating	Steel	Steel	Direct	2029K46	000000000

Wall-Mount Jet-Stream Fans

Often used to cool warehouse aisles and production lines, these fans generate a stream of air that travels farther than air from conventional fans. They have a direct-drive motor, which has fewer moving parts than belt-drive motors for less maintenance. They also have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.

Fans with Totally Enclosed Motor Enclosure

Image of Product. Front orientation. Fans. Wall-Mount Jet-Stream Fans.

	Blade								Overall						Mounting
	Dia.	Material	Airflow	Volume	Motor Speed, rpm	No. of Speeds	Power, hp	Current	Ht.	Wd.	Dp.	Drive Type	Housing Material	Guard Material	Fasteners Included	Hole Dia.		Each
208-230/460V AC, Three Phase—Hardwire







				Non-Oscillating Fan

				34"	Aluminum	17,000 ft³/min	88 dBA @ 15 ft.	1,200	1	3	9.9 amp 4.6 amp	50"	43"	25"	Direct	Steel	Steel	Yes	11/16"	2138K22	000000000

Direct-Drive Downdraft Roof-Mount Exhaust Fans

Style 2

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. More economical than upblast roof-mount exhaust fans, these draw stagnant and humid air out through your roof and then direct it back toward the roof. All fans have a disconnect switch to turn off the power for servicing.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

	Exhaust Fans															Mounting Bases
							Overall
	Style	Blade Dia.	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Base Wd.	Wt., lb.	Ambient Temp., ° F	Housing Material	Certification		Each		Each
Open Dripproof (ODP) Motor Enclosure







				208/230V AC Three Phase—Hardwire

				2	24"	8,100 ft³/min @ 1/2 in. H₂O 9,000 ft³/min @ 0 in. H₂O	73 dBA @ 5 ft.	925	3	43 7/16"	37 1/4"	33"	288	120	Aluminum	AMCA Certified, ETL Listed	2011K25	000000000	2230K39	0000000

Dust-Resistant Belt-Drive Wall-Mount Exhaust Fans

Better suited for dirty, dusty, and damp environments than standard direct-drive fans, these have a totally enclosed motor enclosure. Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. Use these fans to draw stagnant and humid air out of a room or area.

230/460V AC, Three Phase (Hardwire)—Totally Enclosed Motor Enclosure


	Exhaust Fan Collars

Exhaust Fan Collars—Collars and louvers are sold separately. Use a collar to connect a wall-mount exhaust fan to a louver.

Exhaust Fans														Exhaust Fan Collars
							Overall
Blade Dia.	Airflow, ft³/min	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Dp.	Frame Material	Blade Material		Each		Each
48"	26,800	72 dB @ 5 ft.	Belt	600	1	3	54"	54"	24 7/8"	Steel	Steel	1922K95	000000000	5353K18	0000000

Oil- and Coolant-Removing Air Purifiers


	Replacement Filters

Often used in machine shops, these purifiers remove oil and coolant mist from the air. Air passes through a spinning drum.

Cannot Be Sold to California—Purifiers that cannot be sold to California are restricted due to energy efficiency requirements.

Purifiers																		Replacement Filters
						Overall
Airflow, ft³/min	Volume (Sound) @ Distance	Power, hp	Voltage	Current	For Inlet Duct Dia.	Ht.	Wd.	Dp.	Mounting Fasteners Included	Mounting Hole Dia.	Housing Material	No. of Speeds	Includes	For Removing	Cannot Be Sold To		Each		Each
1,000	60 dB @ 15 ft.	3	208V AC 240V AC 460V AC	4.8 amp 9.6 amp 10.6 amp	6"	23"	21"	22"	No	9/16"	Steel	1	Disposable Filter (Captures 98% of mist particles down to 1 micron)	Oil, Coolant	California	2210K6	000000000	2210K16	000000