Made from rubber, these nozzles won’t scratch or damage sensitive workpieces.

These premium nozzles are engineered for the most efficient airflow consumption.

Control consumption and noise by adjusting the airflow.

Extend these telescoping nozzles to increase your reach.

These needle-style nozzles force air to a precise pinpoint.

These nozzles are made of FDA-listed materials.

Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles.

Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.

As compressed air flows through these nozzles, they rotate to efficiently and evenly blow off large areas.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.

Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.

The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.