Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.

A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.

An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.

A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.

Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.

Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.

A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.

With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.

Let go of this hose and it will spring back out of your way.

Form elbows and bends with this hose and it will hold its shape without support.

A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.

This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.

In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.

This white hose makes dirt and other contaminants easy to spot.

The small bend radius makes this hose easy to wrap around corners and install in tight spaces.

The neoprene coating on this hose withstands continuous motion without weakening.

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

Hose meets UL 94 V-2 for flame retardance.

Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.

SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.

Hose has a plastic spiral that acts as a wear strip to protect against damage.

Formed by metal interlocked strips, this hose has the strength to stand up to sharp, abrasive materials.

Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.

Step on or drive over this hose without causing damage.

If your liquid contains some solid particles, this tough EPDM rubber hose can handle the extra abrasion.

Move flour, grain, rice, sugar, and other dry food through your line.

The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.

Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.

The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.

Made of PVC, this hose stays flexible in temperatures as low as -65° F.

Hose is PVC, so it’s lighter and less cumbersome than rubber hose.

Hose is polyurethane so it stretches and flexes more than nylon retracting hose.

Made of thick, rigid nylon, this hose has excellent durability and the highest pressure rating of the retracting hose we offer.

Supply air to two power tools without worrying about your lines getting tangled.

Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.

Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.

More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.

This hose is made of tough gum rubber that stands up to sand, steel shot, and other abrasives.

Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system.