About Lubricants
More
Solid and Paste Milling, Drilling, and Turning Coolants
An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used with shallow drilling, reaming, and tapping, as well as on saw blades. Remove from tools and work surfaces with alcohol, methyl ethyl ketone, or a parts washer. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Coolant in a stick is solid. Touch it to cutting tools or work surfaces. Coolant in a jar is a paste. It can also be used as a bending and forming paste.
Container | |||||||
|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Net Weight, oz. | Type | Lg. | Dia. | Compatible With | Each | |
Synthetic Base Oil | |||||||
| __ | 1.6 | Stick | 2 1/8" | 1 1/2" | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 00000 |
| 12 | __ | Jar | __ | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 00000 |
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Net Weight, oz. | Type | Lg. | Dia. | Compatible With | Pkg. Qty. | Pkg. | |
Synthetic Base Oil | ||||||||
| __ | 1.6 | Stick | 2 1/8" | 1 1/2" | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 50 | 00000000 | 0000000 |
| 12 | __ | Jar | __ | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
Milling, Drilling, and Turning Coolants for Nearly Dry Machining
Apply these coolants to your cutting tools before and during milling and machining to reduce heat with very little cleanup. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Remove oil-based coolants with alcohol, methyl ethyl ketone, or a parts washer.