Filter by
Capacity per Mount
Mounting Hole Center-to-Center
Shear Capacity per Mount
Material
Hardness Rating
Hardness
Diameter
Base Material
Base Width
Mounting Hole Diameter
Deflection @ Capacity
Base Length
DFARS Specialty Metals
Export Control Classification Number (ECCN)
About Vibration-Damping Mounts
Choose the right vibration-damping mounts to protect equipment from damage and reduce noise.
Vibration-Damping Bolt-Down Mounts
 |  |  |  |
Threaded-Insert Mount, Style 1 | Threaded-Insert Mount Style 2 | Threaded-Insert Mount, Style 3 | Threaded-Insert Mount, Style 4 |
 |  |  |  |
Threaded-Insert Mount Style 5 | Threaded-Insert Mount Style 6 | Threaded-Insert Mount, Style 7 | Unthreaded-Hole Mount, Style 8 |
 |  |  | |
Unthreaded-Hole Mount, Style 9 | Unthreaded-Hole Mount, Style 10 | Unthreaded-Hole Mount, Style 11 |
These mounts reduce vibration and noise while anchoring machinery from below. Bolt them to the bases of fans, pumps, and generators so vibration from moving components doesn't wear out parts, crack floors, and push equipment out of place.
Multipurpose Neoprene with Threaded-Insert Mount
| |
Style 1 | Style 2 |
| |
Style 3 | Style 4 |
| |
Style 5 | Style 6 |
| |
Style 7 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Style 1—The economical choice, these mounts absorb enough shock and vibration for most machinery.
Style 2—If you can't drill bolt holes into your equipment or floor, use these ribbed, antislip mounts without fasteners.
Styles 3 and 5—The arched construction dissipates the heavy thuds of punch presses and other high-impact machinery.
Style 4—Offset slow, rumbling vibrations, such as those caused by vehicles and large machinery. These mounts compress (deflect) at two separate points to absorb low-frequency vibration better than mounts that only deflect in one place.
Style 6—In addition to high load capacities, the wide, rigid mounting surface minimizes leaning and wobbling.
Style 7—Built to absorb vibration and support weight when installed at any angle, these mounts withstand both head-on force (Cap. per Mount) and force from the side (Shear Cap. per Mount).
Base | Mounting | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount, lb. | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | |||
| 1 | 5/16"-18 | 50 | 0.12" | Not Rated | Not Rated | 1" | 1.2" | 3.13" | 1.75" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 00000 | ||
| 1 | 5/16"-18 | 80 | 0.12" | Not Rated | Not Rated | 1" | 1.2" | 3.13" | 1.75" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 0000 | ||
| 1 | 5/16"-18 | 110 | 0.12" | Not Rated | Not Rated | 1" | 1.2" | 3.13" | 1.75" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 0000 | ||
| 1 | 5/16"-18 | 160 | 0.12" | Not Rated | Not Rated | 1" | 1.2" | 3.13" | 1.75" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 0000 | ||
| 1 | 3/8"-16 | 130 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 3/8"-16 | 250 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 3/8"-16 | 350 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 3/8"-16 | 480 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 1/2"-20 | 130 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 1/2"-20 | 250 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 1/2"-20 | 350 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 1 | 1/2"-20 | 480 | 0.12" | Not Rated | Not Rated | 1.12" | 1.83" | 3.75" | 2.25" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 2 | 1/2"-13 | 1,500 | 0.25" | Not Rated | Not Rated | 1.63" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 1,500 | 0.5" | Not Rated | Not Rated | 2.75" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 2,250 | 0.25" | Not Rated | Not Rated | 1.63" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 2,250 | 0.5" | Not Rated | Not Rated | 2.75" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 3,000 | 0.25" | Not Rated | Not Rated | 1.63" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 3,000 | 0.5" | Not Rated | Not Rated | 2.75" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 4,000 | 0.25" | Not Rated | Not Rated | 1.63" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 2 | 1/2"-13 | 4,000 | 0.5" | Not Rated | Not Rated | 2.75" | 3" | 6.25" | 4.63" | -20 to 180 | No | 2 | 0.56" | 5" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 60 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 2" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 100 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 2" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 130 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 2" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 200 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 4" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 260 | 0.2" | Not Rated | Not Rated | 1.5" | 1.53" | 4.41" | 4" | -20 to 180 | No | 2 | 0.41" | 3.75" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 700 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 3 | 1/2"-13 | 1,000 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 4 | 5/16"-18 | 45 | 0.35" | Not Rated | Not Rated | 1.5" | 1.19" | 3.19" | 1.63" | -20 to 225 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 00000 | ||
| 4 | 5/16"-18 | 75 | 0.35" | Not Rated | Not Rated | 1.5" | 1.19" | 3.19" | 1.63" | -20 to 225 | No | 2 | 0.34" | 2.38" | Steel | 0000000 | 00000 | ||
| 4 | 5/16"-18 | 125 | 0.35" | Not Rated | Not Rated | 1.5" | 1.19" | 3.19" | 1.63" | -20 to 225 | No | 2 | 0.34" | 2.38" | Steel | 00000000 | 00000 | ||
| 4 | 3/8"-16 | 150 | 0.4" | Not Rated | Not Rated | 1.88" | 1.75" | 3.88" | 2.31" | -20 to 225 | No | 2 | 0.34" | 3" | Steel | 0000000 | 00000 | ||
| 4 | 3/8"-16 | 380 | 0.4" | Not Rated | Not Rated | 1.88" | 1.75" | 3.88" | 2.31" | -20 to 225 | No | 2 | 0.34" | 3" | Steel | 0000000 | 00000 | ||
| 4 | 3/8"-16 | 600 | 0.4" | Not Rated | Not Rated | 1.88" | 1.75" | 3.88" | 2.31" | -20 to 225 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 4 | 1/2"-13 | 600 | 0.5" | Not Rated | Not Rated | 2.75" | 2.56" | 5.5" | 3.31" | -20 to 225 | No | 2 | 0.56" | 4.13" | Steel | 00000000 | 00000 | ||
| 4 | 1/2"-13 | 1,000 | 0.5" | Not Rated | Not Rated | 2.75" | 2.56" | 5.5" | 3.31" | -20 to 225 | No | 2 | 0.56" | 4.13" | Steel | 00000000 | 00000 | ||
| 4 | 1/2"-13 | 2,100 | 0.5" | Not Rated | Not Rated | 2.75" | 3.38" | 6.25" | 4" | -20 to 225 | No | 2 | 0.56" | 5" | Steel | 00000000 | 00000 | ||
| 4 | 1/2"-13 | 4,300 | 0.5" | Not Rated | Not Rated | 2.75" | 3.38" | 6.75" | 4.38" | -20 to 225 | No | 2 | 0.56" | 5.5" | Steel | 00000000 | 00000 | ||
| 5 | 5/8"-11 | 1,500 | 0.03" | Not Rated | Not Rated | 1.19" | 4" | 7" | 2.5" | 0 to 180 | No | 2 | 0.66" | 5.5" | Steel | 00000000 | 000000 | ||
| 5 | 5/8"-11 | 3,000 | 0.03" | Not Rated | Not Rated | 1.19" | 4" | 7" | 4" | 0 to 180 | No | 2 | 0.66" | 5.5" | Steel | 00000000 | 000000 | ||
| 6 | 1/2"-13 | 1,500 | 0.19" | Not Rated | Not Rated | 1.61" | 5.31" | 7.25" | 3" | -20 to 180 | No | 2 | 0.44" | 6.25" | Steel | 000000000 | 000000 | ||
| 6 | 1/2"-13 | 1,500 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | 1/2"-13 | 2,000 | 0.19" | Not Rated | Not Rated | 1.61" | 5.31" | 7.25" | 3" | -20 to 180 | No | 2 | 0.44" | 6.25" | Steel | 000000000 | 000000 | ||
| 6 | 1/2"-13 | 2,500 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | 1/2"-13 | 3,000 | 0.19" | Not Rated | Not Rated | 1.61" | 5.31" | 7.25" | 3" | -20 to 180 | No | 2 | 0.44" | 6.25" | Steel | 000000000 | 000000 | ||
| 6 | 1/2"-13 | 4,400 | 0.19" | Not Rated | Not Rated | 1.61" | 5.31" | 7.25" | 3" | -20 to 180 | No | 2 | 0.44" | 6.25" | Steel | 000000000 | 000000 | ||
| 6 | 3/4"-10 | 700 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | 3/4"-10 | 1,000 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | 3/4"-10 | 1,500 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | M12 × 1.75 mm | 700 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | M12 × 1.75 mm | 1,000 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | M12 × 1.75 mm | 1,500 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 6 | M12 × 1.75 mm | 2,500 | 0.25" | Not Rated | Not Rated | 1.61" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 000000000 | 00000 | ||
| 7 | 1/4"-20 | 14 | 0.01" | 14 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | -20 to 180 | No | 4 | 0.2" | 1.938" | Steel | 00000000 | 00000 | ||
| 7 | 1/4"-20 | 24 | 0.01" | 24 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | -20 to 180 | No | 4 | 0.2" | 1.938" | Steel | 00000000 | 00000 | ||
| 7 | 1/4"-20 | 60 | 0.01" | 60 | 0.01" | 1.125" | 2.313" | 2.375" | 2.375" | -20 to 180 | No | 4 | 0.2" | 1.938" | Steel | 00000000 | 00000 | ||
| 7 | 3/8"-16 | 50 | 0.01" | 50 | 0.01" | 1.5" | 3" | 3" | 3" | -20 to 180 | No | 4 | 0.27" | 2.5" | Steel | 00000000 | 00000 | ||
| 7 | 3/8"-16 | 110 | 0.01" | 110 | 0.01" | 1.5" | 3" | 3" | 3" | -20 to 180 | No | 4 | 0.27" | 2.5" | Steel | 00000000 | 00000 | ||
High-Temperature Silicone Rubber with Threaded-Insert Mount
|
Style 1 |
These mounts handle temperatures about twice as high as natural rubber and neoprene. Use them to reduce vibration on and around ovens, kilns, and other heat-generating equipment.
Style 1—The economical choice, these mounts absorb enough shock and vibration for most machinery.
Base | Mounting | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | |||
| 1 | 5/16"-18 | 35 | 0.2" | Not Rated | Not Rated | 1" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 000000 | ||
| 1 | 5/16"-18 | 35 | 0.4" | Not Rated | Not Rated | 1.25" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 45 | 0.2" | Not Rated | Not Rated | 1" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 45 | 0.4" | Not Rated | Not Rated | 1.25" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 70 | 0.2" | Not Rated | Not Rated | 1" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 70 | 0.4" | Not Rated | Not Rated | 1.25" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 120 | 0.2" | Not Rated | Not Rated | 1" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 5/16"-18 | 120 | 0.4" | Not Rated | Not Rated | 1.25" | 1.25" | 3.13" | 1.75" | -80 to 300 | No | 2 | 0.34" | 2.38" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 135 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 135 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 170 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 170 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 240 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 240 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 380 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 380 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 550 | 0.25" | Not Rated | Not Rated | 1.25" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 3/8"-16 | 550 | 0.5" | Not Rated | Not Rated | 1.75" | 1.75" | 3.88" | 2.38" | -80 to 300 | No | 2 | 0.34" | 3" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 250 | 0.25" | Not Rated | Not Rated | 1.75" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 250 | 0.5" | Not Rated | Not Rated | 2.88" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 525 | 0.25" | Not Rated | Not Rated | 1.75" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 525 | 0.5" | Not Rated | Not Rated | 2.88" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 750 | 0.25" | Not Rated | Not Rated | 1.75" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 750 | 0.5" | Not Rated | Not Rated | 2.88" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 1,100 | 0.25" | Not Rated | Not Rated | 1.75" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
| 1 | 1/2"-13 | 1,100 | 0.5" | Not Rated | Not Rated | 2.88" | 2.5" | 5.5" | 3.38" | -80 to 300 | No | 2 | 0.56" | 4.13" | Silicone Rubber | 0000000 | 00000 | ||
Natural Rubber with Unthreaded-Hole Mount
|
Style 8 |
|
Style 9 |
These mounts don’t scuff or tear easily, and they stay strong and flexible at subfreezing temperatures.
Styles 8 and 9—Our low-profile options block vibration around wiring, circuit boards, and other components installed in narrow gaps. Install a washer (sold separately) to support equipment and avoid costly downtime if the rubber fails.
Aluminum Base—Won't weaken and rust as quickly as steel when exposed to moisture and chemicals.
Vibration-Damping Mounts | Washers | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Mounting | |||||||||||||||||||||
Style | Hole Dia. | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Thk. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | Each | ||||
| 8 | 0.166" | 2 | 0.06" | Not Rated | Not Rated | 0.78" | 1" | 1.69" | 1.69" | 0.025" | 0 to 170 | No | 4 | 0.141" | 1.375" | Aluminum | 0000000 | 000000 | 0000000 | 00000 | ||
| 8 | 0.166" | 4 | 0.06" | Not Rated | Not Rated | 0.78" | 1" | 1.69" | 1.69" | 0.025" | 0 to 170 | No | 4 | 0.141" | 1.375" | Aluminum | 0000000 | 00000 | 0000000 | 0000 | ||
| 8 | 0.166" | 8 | 0.06" | Not Rated | Not Rated | 0.5" | 1" | 1.25" | 1.25" | 0.032" | 0 to 170 | No | 4 | 0.141" | 1" | Aluminum | 0000000 | 00000 | 0000000 | 0000 | ||
| 8 | 0.166" | 8 | 0.06" | Not Rated | Not Rated | 0.81" | 1" | 1.69" | 1.69" | 0.025" | 0 to 170 | No | 4 | 0.141" | 1.375" | Aluminum | 0000000 | 00000 | 0000000 | 0000 | ||
| 8 | 0.257" | 30 | 0.06" | Not Rated | Not Rated | 1.41" | 1.5" | 2.38" | 2.38" | 0.032" | 0 to 170 | No | 4 | 0.196" | 1.938" | Steel | 0000000 | 00000 | 0000000 | 0000 | ||
| 8 | 0.391" | 45 | 0.06" | Not Rated | Not Rated | 1.56" | 2" | 3" | 3" | 0.032" | 0 to 170 | No | 4 | 0.257" | 2.5" | Steel | 0000000 | 00000 | 0000000 | 0000 | ||
| 9 | 0.257" | 30 | 0.06" | Not Rated | Not Rated | 1.12" | 1.5" | 1.75" | 1.75" | 0.05" | 0 to 170 | No | 4 | 0.166" | 1.375" | Steel | 0000000 | 00000 | 0000000 | 0000 | ||
| 9 | 0.391" | 90 | 0.06" | Not Rated | Not Rated | 1.81" | 2" | 2.25" | 2.25" | 0.062" | 0 to 170 | No | 4 | 0.196" | 1.75" | Steel | 0000000 | 00000 | 0000000 | 0000 | ||
Multipurpose Neoprene with Unthreaded-Hole Mount
|
Style 10 |
|
Style 11 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Style 10—Our low-profile options block vibration around wiring, circuit boards, and other components installed in narrow gaps. Install a washer (sold separately) to support equipment and avoid costly downtime if the rubber fails.
Style 11—Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.
Aluminum Base—Won't weaken and rust as quickly as steel when exposed to moisture and chemicals.
Vibration-Damping Mounts | Washers | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Mounting | |||||||||||||||||||||
Style | Hole Dia. | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Thk. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | Each | ||||
| 10 | 0.166" | 2 | 0.06" | Not Rated | Not Rated | 0.41" | 1" | 1.25" | 1.25" | 0.032" | -20 to 180 | No | 4 | 0.141" | 1" | Steel | 0000000 | 00000 | 0000000 | 00000 | ||
| 10 | 0.166" | 4 | 0.06" | Not Rated | Not Rated | 0.41" | 1" | 1.25" | 1.25" | 0.032" | -20 to 180 | No | 4 | 0.166" | 1" | Steel | 0000000 | 0000 | 0000000 | 0000 | ||
| 10 | 0.257" | 12 | 0.09" | Not Rated | Not Rated | 0.63" | 1.5" | 1.75" | 1.75" | 0.05" | -20 to 180 | No | 4 | 0.169" | 1.375" | Steel | 000000 | 0000 | 0000000 | 0000 | ||
| 10 | 0.391" | 20 | 0.185" | Not Rated | Not Rated | 1.06" | 2" | 2.25" | 2.25" | 0.062" | -20 to 180 | No | 4 | 0.196" | 1.75" | Steel | 0000000 | 0000 | 0000000 | 0000 | ||
| 10 | 0.391" | 45 | 0.185" | Not Rated | Not Rated | 1.06" | 2" | 2.25" | 2.25" | 0.062" | -20 to 180 | No | 4 | 0.196" | 1.75" | Steel | 0000000 | 0000 | 0000000 | 0000 | ||
| 11 | 0.26" | 4 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 0000000 | 0000 | ——— | 0 | ||
| 11 | 0.26" | 6.5 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 00000000 | 0000 | ——— | 0 | ||
| 11 | 0.26" | 11 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 00000000 | 0000 | ——— | 0 | ||
| 11 | 0.26" | 15 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 00000000 | 0000 | ——— | 0 | ||
| 11 | 0.26" | 18 | 0.12" | Not Rated | Not Rated | 0.75" | 0.9" | 1.68" | 1.25" | — | -20 to 180 | No | 2 | 0.17" | 1.41" | Aluminum | 00000000 | 0000 | ——— | 0 | ||
Fail-Safe Vibration-Damping Bolt-Down Mounts
Avoid the cost and hassle of a mount suddenly giving out. Even if the rubber fails, the interlocking steel body holds up to minimize downtime while you find a replacement. These mounts absorb shock and vibration to extend the life of heavy machinery and prevent cracking in nearby equipment, floors, and walls.
Multipurpose Neoprene with Threaded-Insert Mount
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | |||
| 1/4"-20 | 46 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 00000 | ||
| 1/4"-20 | 87 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| 1/4"-20 | 115 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| 1/4"-20 | 137 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| 5/16"-18 | 85 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| 5/16"-18 | 170 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| 5/16"-18 | 250 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| 5/16"-18 | 340 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| 3/8"-16 | 210 | 0.1" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 3/8"-16 | 210 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 0000000 | 00000 | ||
| 3/8"-16 | 360 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 3/8"-16 | 370 | 0.1" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 3/8"-16 | 520 | 0.1" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 3/8"-16 | 520 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 3/8"-16 | 680 | 0.1" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 3/8"-16 | 680 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 00000000 | 00000 | ||
| 3/8"-16 | 750 | 0.08" | Not Rated | Not Rated | 1.12" | 1.78" | 3.75" | 2.27" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| 1/2"-13 | 471 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| 1/2"-13 | 713 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| 1/2"-13 | 940 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| 1/2"-13 | 1,064 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 900 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 1,106 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 1,630 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 2,270 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 2,500 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 3,520 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 4,124 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 000000000 | 00000 | ||
| 3/4"-10 | 6,600 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 000000000 | 00000 | ||
| M6 × 1 mm | 46 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| M6 × 1 mm | 87 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| M6 × 1 mm | 115 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| M6 × 1 mm | 137 | 0.05" | Not Rated | Not Rated | 0.75" | 0.92" | 2.27" | 1.25" | 10 to 180 | No | 2 | 0.26" | 1.75" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 85 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 170 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 210 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| M8 × 1.25 mm | 250 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 340 | 0.08" | Not Rated | Not Rated | 1.02" | 1.2" | 3.13" | 1.73" | 10 to 180 | No | 2 | 0.34" | 2.38" | Steel | 000000000 | 0000 | ||
| M8 × 1.25 mm | 360 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| M8 × 1.25 mm | 520 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| M8 × 1.25 mm | 680 | 0.1" | Not Rated | Not Rated | 1.25" | 1.86" | 3.81" | 2.32" | 10 to 180 | No | 2 | 0.34" | 3" | Steel | 000000000 | 00000 | ||
| M12 × 1.75 mm | 470 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| M12 × 1.75 mm | 715 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| M12 × 1.75 mm | 940 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| M12 × 1.75 mm | 1,064 | 0.13" | Not Rated | Not Rated | 1.78" | 2.42" | 5.5" | 3.37" | 10 to 180 | No | 2 | 0.51" | 4.12" | Steel | 000000000 | 00000 | ||
| M20 × 2.5 mm | 900 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| M20 × 2.5 mm | 1,106 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| M20 × 2.5 mm | 1,630 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
| M20 × 2.5 mm | 2,500 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 000000000 | 00000 | ||
Multipurpose Neoprene with Unthreaded-Hole Mount
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hole Dia. | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | Each | |||
| 0.5" | 375 | 0.13" | Not Rated | Not Rated | 1.66" | 3.25" | 5.38" | 3.25" | 10 to 180 | No | 2 | 0.53" | 4.12" | Steel | 00000000 | 000000 | ||
| 0.5" | 800 | 0.13" | Not Rated | Not Rated | 1.66" | 3.25" | 5.38" | 3.25" | 10 to 180 | No | 2 | 0.53" | 4.12" | Steel | 00000000 | 00000 | ||
| 0.5" | 925 | 0.13" | Not Rated | Not Rated | 1.66" | 3.25" | 5.38" | 3.25" | 10 to 180 | No | 2 | 0.53" | 4.12" | Steel | 00000000 | 00000 | ||
| 0.5" | 1,425 | 0.13" | Not Rated | Not Rated | 1.66" | 3.25" | 5.38" | 3.25" | 10 to 180 | No | 2 | 0.53" | 4.12" | Steel | 00000000 | 00000 | ||
| 0.625" | 525 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.625" | 1,000 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.625" | 1,250 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.625" | 1,950 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.75" | 525 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.75" | 1,000 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.75" | 1,250 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
| 0.75" | 1,950 | 0.13" | Not Rated | Not Rated | 1.66" | 3.94" | 6.25" | 3.94" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 00000000 | 00000 | ||
High-Stability Vibration-Damping Mounts
Absorb vibration from all directions at once to stabilize oscillating equipment such as centrifuges, fans, and tumblers. Unlike many high-capacity mounts, the resilient metal coils flex to withstand shear (horizontal) force.
Corrosion-Resistant Stainless Steel with Unthreaded-Hole Mount
 |
Last longer than steel when exposed to water and mild chemicals, such as weak acids used in food production and the acetone found in degreasers.
Overall | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount, lb. | Deflection @ Shear Cap. | Ht. | Lg. | Wd. | Bar Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Each | |||
| 9 | 0.13" | 2 | 0.13" | 1" | 3.1" | 1.2" | 0.4" | -150 to 500 | No | 4 | 0.18" | 2.7" | 0000000 | 000000 | ||
| 12 | 0.13" | 3 | 0.13" | 1.4" | 4.4" | 1.6" | 0.5" | -150 to 500 | No | 4 | 0.2" | 3.95" | 00000000 | 000000 | ||
| 17 | 0.13" | 4 | 0.13" | 1.3" | 4.4" | 1.5" | 0.5" | -150 to 500 | No | 4 | 0.2" | 3.95" | 0000000 | 000000 | ||
| 25 | 0.13" | 7 | 0.13" | 1.1" | 4.4" | 1.3" | 0.5" | -150 to 500 | No | 4 | 0.2" | 3.95" | 0000000 | 000000 | ||
| 40 | 0.13" | 12 | 0.13" | 1.5" | 5" | 1.8" | 0.6" | -150 to 500 | No | 4 | 0.26" | 4.5" | 0000000 | 000000 | ||
| 55 | 0.13" | 19 | 0.13" | 1.3" | 5" | 1.6" | 0.6" | -150 to 500 | No | 4 | 0.26" | 4.5" | 00000000 | 000000 | ||
| 75 | 0.13" | 20 | 0.13" | 1.3" | 5" | 1.7" | 0.6" | -150 to 500 | No | 4 | 0.26" | 4.5" | 0000000 | 000000 | ||
| 125 | 0.13" | 39 | 0.13" | 1.6" | 5" | 1.8" | 0.6" | -150 to 500 | No | 4 | 0.26" | 4.5" | 00000000 | 000000 | ||
| 175 | 0.13" | 53 | 0.13" | 1.4" | 5" | 1.6" | 0.6" | -150 to 500 | No | 4 | 0.26" | 4.5" | 0000000 | 000000 | ||
| 200 | 0.13" | 50 | 0.13" | 2.9" | 6.7" | 3.5" | 1" | -150 to 500 | No | 8 | 0.28" | 1.75", 2.63", 1.75" | 00000000 | 000000 | ||
| 300 | 0.13" | 60 | 0.13" | 2.8" | 8.5" | 3.3" | 1" | -150 to 500 | No | 8 | 0.28" | 1.75", 2.63", 1.75" | 0000000 | 000000 | ||
| 500 | 0.13" | 105 | 0.13" | 3.5" | 8.5" | 4.1" | 1" | -150 to 500 | No | 8 | 0.33" | 1.75", 2.63", 1.75" | 0000000 | 000000 | ||
| 900 | 0.13" | 200 | 0.13" | 3.9" | 10.5" | 4.4" | 1" | -150 to 500 | No | 8 | 0.41" | 2.15", 3.23", 2.15" | 0000000 | 000000 | ||
Shock-Absorbing Spring Vibration-Damping Mounts
Absorb higher-intensity shocks and vibration than mounts without springs. These mounts compress (deflect) four times farther than other mounts when force is applied to protect shaking, thudding machinery and nearby equipment. They also dissipate the low, slow-moving vibrations other mounts can't handle, such as the rumbling of traffic or a large air compressor. With a durable antislip base that secures equipment without the help of fasteners, these mounts are ideal for floors you can't drill into and equipment without bolt holes.
Steel with Threaded-Insert Mount
 |
Vibration-Damping Mounts | Replacement Springs | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Mounting | ||||||||||||||||||||
Thread Size | Cap. per Mount, lb. | Thread Lg. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Bolt Material | Base Material | Each | Each | ||||
| 3/8"-16 | 50 | 3" | 1" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 000000 | 0000000 | 00000 | ||
| 3/8"-16 | 100 | 3" | 1" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 0000 | ||
| 3/8"-16 | 150 | 3" | 1" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 0000 | ||
| 3/8"-16 | 250 | 3" | 0.83" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 0000 | ||
| 3/8"-16 | 370 | 3" | 0.75" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 0000 | ||
| 3/8"-16 | 520 | 3" | 0.75" | Not Rated | Not Rated | 3.375" | 5.875" | 2.38" | -20 to 180 | No | 2 | 0.438" | 5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
| 1/2"-13 | 675 | 3 1/2" | 1.32" | Not Rated | Not Rated | 5.25" | 7.75" | 3" | -20 to 180 | No | 2 | 0.625" | 6.5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
| 1/2"-13 | 900 | 3 1/2" | 1.02" | Not Rated | Not Rated | 5.25" | 7.75" | 3" | -20 to 180 | No | 2 | 0.625" | 6.5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
| 1/2"-13 | 1,200 | 3 1/2" | 0.9" | Not Rated | Not Rated | 5.25" | 7.75" | 3" | -20 to 180 | No | 2 | 0.625" | 6.5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
| 1/2"-13 | 1,785 | 3 1/2" | 0.88" | Not Rated | Not Rated | 5.25" | 7.75" | 3" | -20 to 180 | No | 2 | 0.625" | 6.5" | Zinc-Plated Steel Bolt | Iron | 0000000 | 00000 | 0000000 | 00000 | ||
Shock-Absorbing Air Spring Vibration-Damping Mounts
Neutralize shock and vibration from your machine no matter how hard it heaves or hammers. These mounts use air pressure rather than a steel frame to support a load. That means four times the deflection and vibration control of a typical bolt-down mount. Fill them with air and stick them under heavy machinery to keep floors intact, seals tight, and fasteners secure. They’ll also soak up the vibration from floors and mounting plates that bumps optical and other precision tools out of alignment.
Multipurpose Neoprene with Threaded-Insert Mount
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | Air Inlet | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Ht. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Max. Pressure, psi | Thread Size | Thread Type | Base Material | Each | |||
| 3/8"-16 | 100 | 1" | Not Rated | Not Rated | 2.5" | 2.88" | 2" | 3" | 3" | -20 to 180 | No | 4 | 0.3" | 2.38" | 60 | 0.305"-32 | Schrader | Aluminum | 00000000 | 0000000 | ||
| 1/2"-13 | 300 | 1" | Not Rated | Not Rated | 2.45" | 4.14" | 1.91" | 4.19" | 4.19" | -20 to 180 | No | 4 | 0.3" | 3.5" | 60 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 1/2"-13 | 600 | 1.5" | Not Rated | Not Rated | 3.5" | 5" | 2.94" | 5.12" | 5.12" | -20 to 180 | No | 4 | 0.3" | 4.25" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 1/2"-13 | 1,200 | 1.5" | Not Rated | Not Rated | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | -20 to 180 | No | 4 | 0.3" | 6" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 5/8"-11 | 2,400 | 1.25" | Not Rated | Not Rated | 3.5" | 9.66" | 2.94" | 10" | 10" | -20 to 180 | No | 4 | 0.56" | 8.5" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 5/8"-11 | 4,800 | 1.5" | Not Rated | Not Rated | 3.5" | 13.31" | 2.94" | 13.5" | 13.5" | -20 to 180 | No | 4 | 0.56" | 12" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M10 × 1.5 mm | 100 | 0.5" | Not Rated | Not Rated | 2.5" | 2.89" | 1.94" | 3" | 3" | -20 to 180 | No | 4 | 0.3" | 2.38" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 00000 | ||
| M12 × 1.75 mm | 300 | 0.5" | Not Rated | Not Rated | 2.5" | 4.14" | 1.94" | 4.19" | 4.19" | -20 to 180 | No | 4 | 0.3" | 3.5" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M12 × 1.75 mm | 550 | 0.5" | Not Rated | Not Rated | 3.5" | 5" | 2.94" | 5.13" | 5.13" | -20 to 180 | No | 4 | 0.3" | 4.25" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M12 × 1.75 mm | 1,200 | 0.5" | Not Rated | Not Rated | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | -20 to 180 | No | 4 | 0.3" | 6" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M16 × 2 mm | 2,400 | 0.5" | Not Rated | Not Rated | 3.5" | 9.66" | 2.94" | 10" | 10" | -20 to 180 | No | 4 | 0.56" | 8.5" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
Seismic Vibration-Damping Mounts
Offset shock and vibration under normal conditions while preventing sheared bolts and other costly damage during an earthquake. With two rows of bolt holes and a steel covering to remain rigid and stable, these mounts withstand 1g of lateral force. Ideal for large industrial machinery, they stay rigid and strong under loads of up to 3,500 pounds.
Multipurpose Neoprene
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Steel Base and Cadmium-Plated Steel Bolt—The cadmium adds lubricity so the bolt threads on smoothly and won’t seize or gall if you need to adjust the height of your equipment.
Base | Mounting | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Thread Lg. | Deflection @ Cap. | Shear Cap. per Mount, lb. | Deflection @ Shear Cap. | Seismic Rating, g | Temp. Range, ° F | Overall Ht. | Lg. | Wd. | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Steel Base and Cadmium-Plated Steel Bolt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 250 | 1 1/4" | 0.15" | 200 | 0.09" | 1 | -20 to 225 | 2.3" | 4.75" | 3" | No | 6 | 0.438" | 3.875", 2" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 525 | 1 1/4" | 0.15" | 420 | 0.09" | 1 | -20 to 225 | 2.3" | 4.75" | 3" | No | 6 | 0.438" | 3.875", 2" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 1,000 | 1 1/4" | 0.15" | 800 | 0.09" | 1 | -20 to 225 | 2.3" | 4.75" | 3" | No | 6 | 0.438" | 3.875", 2" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 1,400 | 1 1/4" | 0.15" | 400 | 0.09" | 1 | -20 to 225 | 2.375" | 6.25" | 3.75" | No | 6 | 0.563" | 5", 2.5" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 2,100 | 1 1/4" | 0.15" | 600 | 0.09" | 1 | -20 to 225 | 2.375" | 6.25" | 3.75" | No | 6 | 0.563" | 5", 2.5" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 3,500 | 1 1/4" | 0.15" | 1,000 | 0.09" | 1 | -20 to 225 | 2.375" | 6.25" | 3.75" | No | 6 | 0.563" | 5", 2.5" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud
Subjected to rigorous stress tests, these mounts withstand movement in every direction to minimize damage during an earthquake. After leveling your machine, bolt the mount to the floor and tighten the locking nut onto the base for added stability. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Three Mounting Holes
 |
With Cushion |
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
Cap. per Mount, lb. | Mounting Holes | With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Load | Pull | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Specs. Met | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M30 × 3.5 mm | 7 1/8" | 13,480 | 6,290 | 10° | 5 7/8" | No | 17/32" | 4 3/32" | NZS 4219 | 11 3/8" | 00000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M36 × 4 mm | 7 1/8" | 21,580 | 6,290 | 10° | 5 7/8" | No | 17/32" | 4 3/32" | NZS 4219 | 11 3/8" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M42 × 4.5 mm | 7 5/16" | 31,470 | 6,290 | 10° | 5 7/8" | No | 17/32" | 4 3/32" | NZS 4219 | 11 3/4" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M48 × 5 mm | 9 1/8" | 31,470 | 6,290 | 10° | 5 7/8" | No | 17/32" | 4 3/32" | NZS 4219 | 13 1/2" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud
Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more holes for securing equipment that you don’t need to move. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
One Offset Mounting Hole
 |
With Cushion |
The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Cap. per Mount, lb. | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 4" | 0.01" | 5° | 2 15/16" | No | 5/8" | 1,770 | 4 7/8" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 4" | 0.06" | 5° | 3 15/16" | No | 5/8" | 2,220 | 5 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 4" | 0.01" | 5° | 2 15/16" | No | 5/8" | 1,770 | 4 7/8" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 4" | 0.06" | 5° | 3 15/16" | No | 5/8" | 2,220 | 5 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 6" | 0.01" | 5° | 2 15/16" | No | 5/8" | 1,770 | 6 7/8" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 6" | 0.06" | 5° | 3 15/16" | No | 5/8" | 2,220 | 7 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 0.01" | 5° | 2 15/16" | No | 5/8" | 1,770 | 6 7/8" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 0.06" | 5° | 3 15/16" | No | 5/8" | 2,220 | 7 1/4" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M12 × 1.75 mm | 3 15/16" | 0.06" | 5° | 2 15/16" | No | 5/8" | 1,770 | 4 13/16" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M16 × 2 mm | 3 15/16" | 0.06" | 5° | 2 15/16" | No | 5/8" | 1,770 | 4 13/16" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M16 × 2 mm | 5 15/16" | 0.06" | 5° | 2 15/16" | No | 5/8" | 1,770 | 6 13/16" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M20 × 2.5 mm | 5 15/16" | 0.06" | 5° | 2 15/16" | No | 5/8" | 1,770 | 6 13/16" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Two Offset Mounting Holes
 |
With Cushion |
The mounting holes extend out from underneath your machine to give you more room to drill and install fasteners.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Cap. per Mount, lb. | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1/2"-13 | 4" | 0.06" | 5° | 2 15/16" | No | 5/8" | 1,770 | 4 7/8" | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 4" | 0.06" | 5° | 2 15/16" | No | 5/8" | 1,770 | 4 7/8" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 6" | 0.06" | 5° | 2 15/16" | No | 5/8" | 1,770 | 6 7/8" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 0.06" | 5° | 2 15/16" | No | 5/8" | 1,770 | 6 7/8" | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud
Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. The rubber cushion on the bottom reduces vibration to extend your machine’s life. In addition, the ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Two Mounting Holes
 |  |
With Cushion |
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Cap Nuts—Cover and protect exposed threads. These nuts are free of crevices where bacteria can grow and have a silicone seal to keep out contaminants. The seal is metal- and X-ray detectable in case it falls into your line.
Leveling Mounts | Cap Nuts | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Thread Size | Thread Lg. | Mounting Ht. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Food Industry Std. | Cap. per Mount, lb. | Overall Ht. | Each | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 2 7/8" | 4" to 5 3/8" | Not Rated | 9° | 3 1/8" | No | 11/32" | 2 1/4" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 6,800 | 6 7/8" | 0000000 | 0000000 | 000000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 4 1/8" | 5 3/16" to 7 3/4" | Not Rated | 9° | 3 1/8" | No | 11/32" | 2 1/4" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 5,400 | 9 1/4" | 0000000 | 000000 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2 7/8" | 4" to 5 3/8" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 9,800 | 6 7/8" | 0000000 | 000000 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4 1/8" | 5 3/16" to 7 3/4" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 9,800 | 9 1/4" | 0000000 | 000000 | 000000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 2 7/8" | 4" to 5 3/8" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 17,400 | 6 7/8" | 0000000 | 000000 | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1"-8 | 4 1/8" | 5 3/16" to 7 3/4" | Not Rated | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 17,400 | 9 1/4" | 0000000 | 000000 | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
One Offset Mounting Hole
 | |
With Cushion |
The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Cap Nuts—Cover and protect exposed threads. These nuts are free of crevices where bacteria can grow and have a silicone seal to keep out contaminants. The seal is metal- and X-ray detectable in case it falls into your line.
Leveling Mounts | Cap Nuts | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Thread Size | Thread Lg. | Mounting Ht. | Deflection @ Cap. | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Food Industry Std. | Cap. per Mount, lb. | Overall Ht. | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 2 7/8" | 4 5/16" to 5 11/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | 7 3/16" | 0000000 | 000000 | 000000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5/8"-11 | 4 1/8" | 5 1/2" to 8 1/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | 9 9/16" | 0000000 | 00000 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2 7/8" | 4 5/16" to 5 11/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | 7 3/16" | 0000000 | 00000 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2 7/8" | 4 5/16" to 5 11/16" | Not Rated | 10° | 4 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 | 7 3/16" | 0000000 | 000000 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4 1/8" | 5 1/2" to 8 1/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | 9 9/16" | 0000000 | 00000 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4 1/8" | 5 1/2" to 8 1/16" | Not Rated | 10° | 4 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 | 9 9/16" | 0000000 | 000000 | 000000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M16 × 2 mm | 2 7/8" | 4 1/8" to 5 1/2" | Not Rated | 10° | 2 9/16" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 2,000 | 7" | 0000000 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M20 × 2.5 mm | 2 7/8" | 4 5/16" to 5 11/16" | Not Rated | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | 7 3/16" | 0000000 | 000000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Easy-Install Vibration-Damping Rigid Leveling Mounts with Threaded Stud
 |
Style 2 |
A two-piece design requires less clearance to install than one-piece mounts. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes. A rubber cushion reduces vibration to protect components and extend your machine’s life.
Aluminum Base—These mounts are lighter than stainless steel ones, reducing the overall weight of your machine. They withstand occasional exposure to moisture, but don't hold up in wet environments like stainless steel.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
Style | Thread Size | Thread Lg. | Cap. per Mount, lb. | Deflection @ Cap. | Base Wd. | Overall Ht. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Aluminum Base and Zinc-Plated Steel Stud with Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | 1/2"-20 | 1 1/2" | 500 | 0.18" | 4" | 1 3/16" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | 1/2"-20 | 1 1/2" | 1,000 | 0.12" | 6" | 1 3/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | 1/2"-20 | 1 1/2" | 1,875 | 0.21" | 4" | 1 3/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | 1/2"-20 | 1 1/2" | 2,500 | 0.13" | 6" | 1 3/16" | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
